Reviews Diamond cut Edges

Shark Corp 10-2440 Fine Cut Saw

  • This flexible fine-cut saw is great for cabinet work, flush cutting (dowels).
  • It can be used for flexed or flush cutting and features the pull-to-cut method for faster, cleaner, easier, and safer sawing.
  • The pull-saw teeth have three cutting edges that are precision diamond-cut, not merely stamp-cut.
  • Twist-lock design allows for fast, easy blade replacement.
Check Stock

Diamond Machining Technology (DMT) W250EFNB DuoSharp Double-Sided Diamond Sharpening Stone, Extra-Fine/Fine, 10 Inch

  • Diamond Wet Stone: Crafted from the highest-quality materials and built to last, this precision flat dual-surface diamond knife sharpener stone ensures consistent, even sharpening every time.
  • Extra-Fine/Fine: Use the fine diamond stone (25 micron / 600 mesh) to get razor-sharp edges, or the extra-fine diamond stone (9 micron / 1200 mesh) to refine and polish edges after sharpening.
  • Versatile: Engineered to provide cutting-edge performance, this diamond sharpener is ideal for sharpening virtually any knife or edged tool, including axes, hatchets, machetes, lawn and garden tools, and more.
  • Fast & Easy: Micronized monocrystalline diamond surface sharpens edges faster and easier than a conventional knife and tool sharpener.
  • No messy oils are needed either — sharpen bench sharpener dry or with water.
  • Made In The USA: Preferred by professionals for their superior quality and versatility, our durable diamond sharpening stones are built to provide years of consistent performance and reliable service.
  • Precision flat, two-diamond surfaced sharpener guaranteed to provide consistent, even sharpening every time.
  • Two sided: Fine diamond for a razor sharp edge and Extra-Fine to polish and refine an edge.
  • Sharpens knives faster than conventional stones with DMT's monocry....
Check Stock

Diamond Machining Technology DMT 8-in Dia-Sharp Diamond Whetstone Bench Stone Extra Fine Grit Sharpener D8E

  • Diamond Wet Stone: Guaranteed not to hollow or groove, this precisely engineered diamond stone ensures consistent, even sharpening every time and....
  • Extra Fine: Polish and refine sharp edges with this extra-fine diamond sharpening plate (9 micron / 1200 mesh).
  • Versatile: Engineered to provide cutting-edge performance, this 8-inch diamond stone sharpener is ideal for repairing and honing knives and tools,....
  • Fast & Easy: A micronized monocrystalline diamond surface sharpens edges faster and easier than conventional sharpening stones.
  • Made In The USA: Preferred by professionals for their superior quality and versatility, our durable diamond sharpening stones are built to provide....
Check Stock

EZARC Oscillating Multi Tool Swing Diamond Blades, Diamond Oscillating Tool Blade, Mortar Cutting Saw Blades for Grout Removal DO57S, 3-Pack

  • 【Diamond Grit Technology】High-temperature quenching of diamond enhances wear resistance. This premium diamond oscillating saw blade has 5 times longer life than carbide grit blades in tough applications..
  • 【Precise & Clean Cut】 Diamond grit edge has a kerf approx. 0.09 inch (2.2 mm), which can achieve a perfectly clean and precise cutting effect. Segment swing grit grout blade is particularly suitable for precise cutting and short cutting as well as precise working right into corners and on edges..
  • 【Unique Design】The oscillating diamond blade with a flat side swing design can easily access into tight space like corners. So it is easy to replace the new tile..
  • 【Cutting Material】This diamond oscillating multi tool blade is used to remove defective tile grout, clean up the mortar, plaster, and porous concrete to clean and rework planked deck joints..
  • 【Wide Applications】EZARC diamond oscillating saw blades can be used for bathroom renovation, flooring work, trimming and correcting work, remove grits or grouts, clean up the mortar before fixing, and various household maintenance around the house.
Check Stock

Diamond Machining Technology (DMT) W250CXNB DuoSharp Double-Sided Diamond Sharpening Stone, Coarse/Extra Coarse, 10 Inch

  • Diamond Wet Stone: Crafted from the highest-quality materials and built to last, this precision flat dual-surface diamond knife sharpener stone ensures consistent, even sharpening every time.
  • Coarse/Extra Coarse: Use the coarse diamond stone (45 micron / 325 mesh) to restore a neglected edge, or the extra-coarse diamond stone (60 micron / 220 mesh) for significantly damaged edges.
  • Versatile: Engineered to provide cutting-edge performance, this diamond sharpener is ideal for sharpening virtually any knife or edged tool, including axes, hatchets, machetes, lawn and garden tools, and more.
  • Fast & Easy: Micronized monocrystalline diamond surface sharpens edges faster and easier than a conventional knife and tool sharpener.
  • No messy oils are needed either — sharpen bench sharpener dry or with water.
  • Made In The USA: Preferred by professionals for their superior quality and versatility, our durable diamond sharpening stones are built to provide years of consistent performance and reliable service.
  • Precision flat, two-diamond surfaced sharpener guaranteed to provide consistent, even sharpening every time.
  • Two sided: Coarse diamond to transform a dull edge and Extra-Coarse diamond to repair a damaged edge.
  • Sharpens knives faster than conventional stones with DMT'....
Check Stock

EZARC 4-1/2 inch Diamond Blade, Super Thin Diamond Saw Blades for Angle Grinder, 4.5\ Tile Blade for Cutting Porcelain Ceramic Granite Marble Tile (2-Pack)

  • ★【Long Lasting Diamond Blade】High performance alloy steel matrix with consistent diamond content and even distribution provide long life, enhanced material removal. Our tile blade with 10 mm segment height guarantees a long lifetime even in the most demanding materials..
  • ★【Superior Performance】Diamond saw blades with super thin X teeth turbo mesh rim not only offer the cleanest and smoothest cuts in different abrasive materials, but also reduce chipping and side friction. Our grinder diamond blade has good cutting quality without broken edges, even on super hard fine slate and marble..
  • ★【Fit Size】Our 4.5" diamond blade is suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor (Includes a adaptor for 20mm arbor). Size:4-1/2 Inch.
  • ★【Professional Design】This diamond tile blade with integrated flange design provides the best cutting quality straight, vibration-free cutting and enhances stability and safety. Silencer Holes help to low down the noise and avoid heat damage during the cutting process..
  • ★【Wide Applications】EZARC tile cutter blade is designed for extremely smooth and clean cutting porcelain, granite, ceramic tile, sandstone quart....
Check Stock

Ettonsun 4 Pcs Diamond Oscillating Tool Blade, Flush Cutting Oscillating Multitool Saw Blades for Grout Removal, Cleaning Mortar Compatible with Dewalt Bosch Dremel Rockwell Makita Fein Multimaster Milwaukee and more

  • 【Super Value Grout Removal Tool】-- Packed of 4 pcs 1.42 inch flush cutting diamond oscillating blades, with diamond cutting edge for long life in tough applications..
  • 【Precise & Clean Cut】-- The diamond grit kerf design of the oscillating blades provides precise and clean cutting effect. Oscillating multitool blade is particularly suitable for precise cutting and short cutting as well as precise working right into corners and on edges..
  • 【Design for Tough】-- This diamond grit oscillating multi tool blade is used to remove defective tile grout, clean up the mortar, plaster, and porous concrete to clean and rework planked deck joints. It can achieve application like finishing the installation of electronics and cutting through grout, cement board and even concrete, digging out a grout job on a tile floor around some door frames, cutting panel to install outdoor outlets, etc..
  • 【Application Scenarios】-- These diamond oscillating saw blades can be used for bathroom renovation, flooring work, trimming and correcting work, remove grits or grouts, clean up the mortar before fixing, and various household maintenan....
Check Stock

THE NEW FOOLPROOF FISH COOKBOOK FOR BEGINNERS : The Complete Guide With The Best Smoker Recipes Secrets For Smart Peoples for Everyone.

  • 3-Stage Kitchen Knife Sharpener: Stages 1 and 2 of the EdgeSelect knife sharpening system use 100% diamond abrasives to sharpen and hone edges.
  • Stage 3 uses patented stropping disks to polish and finish the blade.
  • Diamond Abrasives: This versatile straight-edge and serrated knife sharpener uses proprietary diamond abrasives, the hardest natural substance on earth, to quickly and easily sharpen edges.
  • 15-Degree Edges: This electric sharpener applies an ultra-sharp edge to 15-degree knives and easily converts 20-degree knives to a finer 15-degree edge for easier cutting.
  • Full Length Edge: Flexible spring guides hold the blade at the ideal angle during use, resulting in longer-lasting, arch-shaped edges down the full length of the blade.
  • Easy To Use: Knife sharpener comes equipped with a simple on/off switch.
  • First time sharpening requires approximately 1 minute.
  • Resharpening takes approximately 10 seconds.
Check Stock

StewMac Z-File Fret Crowning File Original Z-File - Two Diamond Edges - Shapes Both Sides At Once -Speeds Up Work!

  • A WHOLE NEW IDEA FOR CROWNING FRETS - Z-Files won't mess up your carefully-leveled fret tops because they only touch the sides of the frets..
  • WON'T CAUSE STRING BUZZ - After you've leveled the frets for uniform height, your crowning file restores their rounded shape, leaving the thinnest....
  • Z-FILE SPEEDS UP YOUR WORK - this fret crowning file shapes both sides of the fret at once - a great choice for busy shops..
  • UNIQUE DIAMOND ABRASIVE CUTTING EDGES - The Z-File features fast cutting 300-grit diamond abrasive and unique angled cutting edges that work the sides....
  • RUBBER COATED HANDLE - Gives firm, comfortable control for the job..
Check Stock

Utoolmart 95mm Diamond Grit Hole Saw Drill Bit for Glass Ceramics Porcelain Ceramic Tile 1Pcs

  • 【Material】- The hole saws are made of diamond and high carbon steel, offering a combination of hardness and toughness for wear resistance..
  • 【Efficiency】- Small incision resistance,feature drilling stably, fast speed, not breaking the border Opening neat, smooth, no broken edges, no....
  • 【Advantage】- Side holes allow for easy slug removal after drilling. Perfect for cutting accurate holes in a wide variety of materials such as....
  • 【Feature】Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws..
  • 【Wide Application】- Diamond hole saw drill bit can be used with a standard electric drill Cut perfect circles with these tools, Suitable for....
Check Stock

OKDIAMOND Diamond Cutting Wheel 6 x 7/8 Inch for Metal, Cut Off Wheel with 3000+ Cuts on Rebar, Steel, Iron and INOX, for Angle Grinder-6 inch

  • All in 1 Metal Solution - 4.5 diamond blades for grinder for metal diamond plate cutting wheel，Angle grinder cutting wheel ，Our cut off wheel allows dry cutting of many metal type materials likes tubes&structural、sheet metal、stainless steel、solids、rebar、castings、steel plates、non-ferrous..
  • LONG LIFE - Metal cutting blade according to the test results, OKDIAMOND enables to make more than 3000 cuts. Increased lifetime of this cut off wheel is ensured by high-temperature plasma soldering and a new generation of diamond grit in the segment. And our cut wheels have no wear and tear after work , it does not wear down like bonded abrasives.
  • Environmental - When you use our cutting wheel : less sparks, no dust, no smell, no overheating. reducing dust particles for a cleaner work station. It's very comfortable in usage than traditional wheels. It's 100% contaminant-free. The diamond cutting wheel can be used for grinding burred edges that can leave after rough metal cutting..
  • SAFETY- Wheel breakage eliminated when operating at high rotation speed (13200 RPM) because of special construction of the disc ....
Check Stock

SHDIATOOL 4-1/2 Inch Diamond Grinding Disc for Granite Marble Single Side Coated Diamond Cutting Wheel with 5/8-Inch-11 Arbor

  • 1pc electroplated diamond cutting and grinding discs for granite & marble, Single side coated(4.5" 5/8-11 Single).
  • 4.5" 5/8-11 Single=Diameter 4.5 inch/115mm,5/8-11 Flange,Single side coated.
  • Designed for wet or dry cutting and grinding,Also used for smooth rough sides and edges.
  • Ideal for marble stone fiberglass,not recommended for hard granite.
  • Electroplated technology keeps all diamond grain attached to the steel core, high diamond exposure rate provide high efficient working performance.
Check Stock

HIGHDRIL Diamond Porcelain Blade for Cutting and Grinding,Diameter 4\ Multipurpose Cup Wheel Beveling Shaping Diamond Disc for Angle Grinder with 5/8-11 Thread

  • Multi-Purpose:2 in 1 Cutting Wheelcan be used for cutting,grinding,beveling,rounding or shaping materials.
  • Its Versatility can save your money and time,only 1 Grinder Blade can solve all finishing,like cutting,surface and tile rim polishing,small cuts,rounding and shaping edges and corners.
  • Wet or Dry cutting and grinding porcelain,tile stoneware,ceramic,marble,granite,stone,concrete.
  • Vacuum Brazed Diamond Technology,more efficient than Electroplated saw blades,5 times.
  • Diamond located on both surfaces of Grinding Blade on the cutting areas,Cuts and grinds fast and leaves a good finish.
Check Stock