Reviews Diamond Tool Bit

Delta Diamond Boss Hog Tuckpointing Mortar Raking Diamond Glitter Bit 4-5/8-inch Length X 1/4" Shank for Mortar Removal

  • MORTAR REMOVAL - Ideal for intricate and delicate mortar removal where a diamond blade wouldn’t fit or be too difficult to use..
  • VACUUM BRAZED - Made with premium super-abrasive vacuum brazed diamond, this bit will grind faster, last longer and cost you less than any comparable tool..
  • SPECIFICATIONS - 4-5/8" long X 1/4" shank fits on most drills. Use on a regular drill. Do not use a impact drill. Allow the bit to do the work, do not apply too much pressure, and allow bit to cool down during use to prevent bending or breaking..
  • LIFETIME WARRANTY + FREE RETURN SHIPPING - All Delta Diamond Products, Inc. diamond blades, coring bits, hole saws and cup wheels feature a lifetime limited warranty against warping, cracking and/or material defects. If any diamond tool (being used for its intended purpose with at least 50% of the wear remaining) fails to perform properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the tool will be replaced at no charge..
Check Stock

Drill Doctor 750X Drill Bit Sharpener with 180 Grit Wheel and 100 Grit Wheel

  • High-quality accessories: The diamond sharpening stone is made of high-quality ABS plastic and brown corundum grinding wheel. It has high hardness, rust resistance, sturdiness and durability. It is suitable for grinding iron drills, but not suitable for very high hardness drills. (If the product with high hardness is ground, it will be shorter than the service life)..
  • Convenient to carry: You can carry this diamond sharpening stones portable drill bit sharpener in your truck toolbox so that you don’t have to go to the hardware store to buy it. In a critical juncture, this tool will do your job well enough, Saving the days of manually searching for the correct angle or accidentally making the edge of the tool tapered..
  • Wide application: The drill bit sharpener is made of a standard hexagonal shank, which is widely applicable. The hexagonal shank has a 6.35mm (1/4) shank diameter on the opposite side. It is suitable for 2~15mm drills. The angle and width can be adjusted. It is suitable for manual and pneumatic screwdrivers. It is very convenient to apply various tools..
  • Increase the life of the drill bit: Small house repair work makes your drill bit dull. These diamond sharpening stones make them brand new. After using it on the drill bit sharpener, the....
Check Stock

Diamond Beveling Chamfer Bit, Countersink Drill Bit for 0-2″ (50mm) Hole Enlarging Trimming in Porcelain, Ceramic Tiles W/ 5/8″-11 Thread for Angle Grinders & 3/8” Hex Shank Adapter for Drills

  • Must Have Tile Tool：This Diamond Chamfer Bit designed to Bevel, Enlarge Holes, Trim, Shape, Smoot Rough Cutting Surfaces in Porcelain, Hard Ceramic Tiles, Granite, Quartz and Marble Countertop and more.
  • Multi-Functional: The Diamond Cone Countersink Drill Bit equals a bunch of different sizes core bits.
  • with one core bit to start a hole, this bit can enlarge the hole into any size between 0 to 2inch (0~50mm).
  • Fit Angle Grinders & Electric Drills: The Diamond Chamfer Bit built with 5/8″-11 Thread for most Angle Grinders, and package also includes a 3/8” Hex Shank Adapter for most electric drills.
  • High Quality: This Diamond Hole Saw bit is heavily diamond coated, it can grind wet or dry, no chips, scratches or bumps, make beautiful holes.
  • recommend to do some test holes in scrap to get the feel for it.
  • Tips of Use: Grinding hard materials will produce a lot of dust and noise, use goggles, ear plugs, and vacuum with it.
  • whenever you have any question, please feel free to contact us.
Check Stock

Diamond Finger Milling Bits 1 Inch（25mm）for Enlarging and Shaping Holes Reshaping Milling Tool for Porcelain Tile Hard Ceramic Marble Stone Granite Counter Sink and More

  • Must Have Tool: Diamond Finger Milling Bit able to elongate, enlarge, and shape circular holes, drain holes in tiling projects in bathroom and kitchen to fit tiles perfectly around pipes, faucets, shower valves and more..
  • Designed for Tough Job: Work perfectly for enlarging or trimming holes in porcelain sink, limestone vanity sink top, ceramic bathroom sink, thick granite countertop, marble, stone,even quartz countertop, which is harder..
  • Time and Money Saver: when upgrade or replace the bathrooms faucets, you may find the faucets are a bit larger than the old ones. Use this Diamond Finger Milling Bit to enlarge the hole, you can save a lot of trouble and time..
  • High Quality: This diamond finger bit is heavily diamond coated, both sides and the end, as a result, it can grind wet or dry, no chips, scratches or bumps, make beautiful holes.
  • recommend to do some test holes in scrap to get the feel for it..
  • Easy to Use: 1 piece of 1 inch (25mm) Vacuum Brazed Diamond finger bit, hole depth up to 2 inch (50mm), with 5/8-11 Thread for most angle grinders.
  • please take your time and do not force the bit.
  • Use goggles, ear plugs, and vacuum with it..
Check Stock

TOOLGAL Diamond Core Drill Bit 5" for Masonry - Wet Drilling of Concrete/Reinforced Concrete - Laser Welded Diamond Segmented - 11/4" UNC for Fixed or Hand-held core Drilling Machines

  • SPECIFICATIONS - This diamond core drill bit made of premium metal components and high quality diamond grits - Diameter: 5" - Useful length: 18.7” - For wet drilling ONLY - Max RPM 470..
  • SMOOTH FAST DRILLING - This premium core drill bit is produced specifically for wet drilling of concrete and reinforced concrete..
  • ENGINEERED FOR EXACT FITTING - With 11/4" UNC connection, this core drill bit allow easy and fast assmbling to common fixed core or hand-held drilling machines..
  • FOR THE PERFECT JOB EVERY TIME - The innovative design of this diamond core drill bit allows it high drilling performance while keeping a long lifetime. Whether you are a plumber, construction worker, or DIY enthusiast this segmented core drill bit is made for you..
  • TOOLGAL, A NAME YOU CAN TRUST - For over 50 years TOOLGAL has been a global leader of masonry diamond tools developing and manufacturing. When you buy this core drill bit or any other tool from TOOLGAL, you are purchasing it directly from the factory..
Check Stock

3/4 Inch Diamond Drill Bit Ceramic Pot Porcelain Tile Glass Bottle Granite Hole Saw 0.75 inches by Drilax

  • DRILL HOLES in glass bottles, porcelain ceramic tiles, plant pots, fish tanks, granite, marble with diamond coated drill bit hole saw..
  • GREAT for making wine bottles with light strings. Can also drill through glass blocks. You can drill through bath tub tile, and put on a handle bars. Aquarium drill bit for overflow installation..
  • WORKS with STANDARD electric, cordless or upright drill presses. Shank size is 3/8 inch..
  • EASY TO USE Diamond Drill Bits. Start at an angle, go vertical, do not apply too much pressure. Keep the tool wet for cooling..
  • DIAMOND TIPPED DRILL BIT for drain holes, bottles, quartz, shower, faucet, kitchen and bathroom upgrades..
Check Stock

DKIBBITH 1 Inch Dry Diamond Core Drill Bits, 25mm Tile Vacuum Brazed Angle Grinder Hole Saw for Porcelain Ceramic Granite Brick Concrete with 5/8-11 Thread to 3/8” Hex Shank Adapter, Black

  • 1″ Dry Diamond Core Drill Bit – Great tool to add to your collection for cutting holes for split AC units plumbing, shower/tub grab bars, shower plumbing, faucet and more projects.
  • Work with Angle Grinders and Electric Drills – Package including a 1 Inch Diamond Hole Saw with 5/8-11 female thread for most Angle Grinders, as well as an arbor to 3/8” Hex Drill Shank which can fit in Power Drills..
  • Excellent Hole Saw for Rough Materials – Fast clean cut through stucco, bricks, concrete, ceramic tile, porcelain, tabby stone, brick, mortar, granite, marble, quartz, etc. Both Dry and Wet will do, and vac will be helpful for dry drilling.
  • Sharp and Durable – Vacuum Brazed Diamond Core Bit chews through materials with ease and minimal wear.
  • stays sharp longer than other masonry hole saw bits as long as taken good care to cool sufficiently.
  • User Tips – When starting the hole, tilt the high-speed bit at a 45-degree angle to touch the surface, then slowly move the drill back upright and let the tool do the cutting, you will have minimal bit walking and create smooth.
Check Stock

Drill Bit Sharpener Portable Diamond Drill Bit Sharpening Tool Corundum Grinding Wheel for Iron-based Drill Bits Fit Width Range-Orange

  • Drill bit set sharpener Applicable Type: This diamond drill bit sharpener is mainly used for grinding iron drills, not suitable for other high hardness drills.This metal drill bit sharpener will be your good helper.This general drill bit sharpener drived by electric drill.Small and portable, practical tools portable drill bit sharpener.
  • Easily Increase the Life of Drill Bits:Power drill bit sharpeners.Forget the days of trying to find the correct angle by hand or accidentally tapering the edge of your drill mounted bit sharpener tools. Improve the utilization of drill bits, solve the troubles you have been buying drill bits, save time and save money..
  • Reliable & Efficient:Drill attachment drill bit sharpener.Compact and portable drill grinding tool, use this drill bit sharpening tool with your power drill to keep bits sharp and ready for use.This drill mounted bit sharpener is due to best for home use..
  • Convenient to carry: You can carry this portable drill bit tools sharpener in your truck toolbox, so that you don’t have to go to the hardware store to buy it. In a critical juncture, this tool will do your job well enough , Saving the days of manually searching for the correct angle or accidentally making the edge of the tool tapered..
Check Stock

MelodySusie Cuticle Clean Nail Drill Bit 3/32'', Professional Safety Carbide Nail Bit Nail Cleaner Ball Bit for Cuticle Dead Skin Nail Prepare, Two Way Rotate, Manicure Nail Salon Supplies

  • Cuticle Cleaning Ball Bit | Color: Silver | Grit: Fine | Shank Size: 3/32'' | Ball Head Diameter: 4 mm | Two-Way Rotation.
  • Carbide Diamond Cuticle Cleaner: Professional design for cuticle removing, sidewall dead skin cleaning, and nail preparation. The ball head bit can gently and effectively remove dead skin and cuticles from the nail bed. Perfect manicure preparation tool for nail salons and professional nail techs..
  • Professional Carbide Nail Drill Bit: Made of premium carbide diamond material, this high precision machining nail bit comes with excellent heat dissipation, low vibration, low noise, and hard-wearing features. Perfect nail care tool for nail techs and nail enthusiasts..
  • Two Way Rotation: Designed to cut smoothly in clockwise and counter-clockwise directions for both two hands. Suitable for Left-handed or Right-handed use, smoothly filing or carving for flawless results..
  • Multifunctional Nail Bit: Easy to remove the cuticle dead skin without damaging the nail plate, saving time for nail preparation. Suitable for nail salon DIY..
Check Stock

Drilax 2 3/4 inch Diamond Drill Bit Hole Saw Ceramic Porcelain Tiles Glass Granite Quartz 2.75 2-3/4 Single Pack

  • DIAMOND TIPPED HOLE SAW DRILL BIT 2-3/4 inch for drain holes, quartz, shower, faucet, kitchen and bathroom upgrades..
  • EASY TO USE Diamond Drill Bits. Start at an angle, go vertical, do not apply too much pressure. Keep the tool wet for cooling..
  • WORKS with STANDARD electric, cordless or upright drill presses. Shank size is 3/8 inch..
  • DRILL HOLES in glass, porcelain ceramic tiles, plant pots, fish tanks, granite, marble with diamond coated drill bit hole saw..
  • Tile installation, tiling made easy for Diamond Hole Saw Tools. Shank size is 3/8" - suitable for all standard cordless or drills..
Check Stock

Dremel 689-01 Carving and Engraving Rotary Tool Accessory Kit - Perfect for use with Wood, Metal, and Glass (11 Piece)

  • This 11-piece accessory kit is specially curated to perform all carving and engraving applications making it easy to express your creativity..
  • Rotary tool accessory set comes in a compact reusable storage box with 11 rotary accessories ideal for etching, engraving, grinding, and sharpening..
  • Engraving/Carving accessories: 105 1/32" Engraving Bit (x1), 106 1/16" Engraving Bit (x1), 107 3/32" Engraving Bit (x1), 108 1/32" Engraving Bit (x1), 7103 5/64" Diamond Wheel Point (x1), 7134 5/64" Diamond Carving Bit (x1).
  • Grinding/Sharpening accessories: 85602 Silicon Carbide Grinding Stone (x1), 83142 9/32" Grinding Stone (x1), 83322 1/8" Grinding Stone (x1), 83702 1/8" Grinding Stone (x1), 84922 3/16" Grinding Stone (x1).
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone or visit us at our service center in Racine, WI..
Check Stock

Magic&shell Diamond Drill Bit Sharpening Tool Corundum Grinding Wheel with Spanner Wrench for Grinder Polishing Blue

  • 【Important Warning]Drill bit sharpener Applicable Type】 This diamond Drill Bit Sharpener for all bits is mainly used for grinding iron drills, not suitable for other high hardness drills.It is a portable drill bit sharpener..
  • 【Easily Increase the Life of Drill Bits】Forget the days of trying to find the correct angle by hand or accidentally tapering the edge of your tools. Improve the utilization of drill bits, solve the troubles you have been buying drill bits, save time and save money..
  • 【Reliable and Efficient】Compact and portable drill grinding tool, Use this drill bit sharpening tool with your power drill to keep bits sharp and ready for use..
  • 【Reliable and Efficient】Compact and portable drill grinding tool, Use this drill bit sharpening tool with your power drill to keep bits sharp and ready for use.
  • 【100% SATISFACTION GUARANTEE】Please feel free to contact with the seller if you have any questions about our products. If you’re unsatisfied with this item for any reason, we’ll immediately refund your the full money..
Check Stock

Meccion Diamond Drill Bit Brazed Core Hole Saws Performance Hollow Hole Cutter for Glass/Tile/Granite/Marble/Porcelain 6mm-50mm 11pcs Set

  • Professional Diamond Hole Cutter: With Special design of diamond brazed For porcelain, glass, marble, ceramic, rock and granite etc..
  • High Quality Hole Drilling: Made from carbon steel with diamond blade ideal for drilling clean and accurate holes and cut a perfect circles with these tools.
  • Longer Service Life: Heavy duty hole saws gives superior performance, Durability is more than 8X.
  • Tips: Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry..
  • Package Include: 6mm (15/64"), 8mm (5/16"), 10mm (25/64"), 12mm (15/32"), 16mm (5/8"), 20mm (25/32"), 22mm (3/4"), 25mm (31/32"), 30mm (1-3/16"), 38mm(1-1/2"), 50mm (1-31/32") diamond hole saw drill bit set of 11 pack.
Check Stock