Reviews Diameter Range

McGard 78713 Stainless Steel Cragar Center Hole Mag Washer - Pack of 10,Silver

  • . 695" Inside Diameter, Outside Diameter 1. 224", Inside Diameter . 695", Thickness . 164".
  • Key tool features hex size for 1. 224" Outside Diameter sockets or lug wrench.
  • McGards Cragar Center Hole polished stainless steel washer are made to fit a wide range of wheel applications..
  • Please note that the Cragar Center hole washers are made to fit a wide range of wheel applications. If unsure please reach out to McGard before purchasing.
Check Stock

Range Kleen SGP-400 Chrome Square Range Pan / Yellow Label 4-PACK

  • Range Kleen SGP-400 Chrome Square Range Pan / Yellow Label 4-PACK.
  • Outside diameter: 7.75 x 7.75 inches. Inside diameter: 4.375 inches..
  • Fits most GE, hotpoint, kenmore, RCA, Whirlpool and tappan ranges with large, square gas pans.
  • Remove from range and wash with soap and water, avoid harsh cleaners and abrasives, which may scratch the finish, do not clean in self-cleaning oven.
Check Stock

Gibson Soho Lounge Purple 16 Piece Dinnerware Set

  • 16 PIECE SET: Dining set includes 4 dinner plates, 4 dessert plates, 4 bowls, and 4 mugs.
  • DURABLE REACTIVE GLAZE: Each piece is made with reactive glaze for long-lasting use.
  • FORMAL OR CASUAL: Perfect for everyday use, formal, or casual dining setting.
  • DISHWASHER AND MICROWAVE SAFE: Microwave and dishwasher safe which makes cleaning easy.
  • RANGE OF TABLE SETTINGS: Suitable for a wide range of table settings.
Check Stock

High Pressure Radial Shaft Seal 30-52-7mm BABSL Oil Seal for Hydraulic Pump Motor

  • Excellent high temperature capabilities and compatible within a wide range of fluids.
  • Outer Diameter (In): 2.047Inch, Outer Diameter (mm): 52mm.
  • Inner Diameter (In): 1.181 Inch, Inner Diameter (mm): 30mm.
  • DMHUI oil seals are widely recognized for quality and reliable performance for every type of repair. Provides long life while providing superior performance.
  • Oil seal with TS 16949 and ISO 9001:2008 Certificate.
Check Stock

2 1/2 Inch Thumb Screw Key Adjustable 304 Stainless Steel Hose Clamps, Pipe Clamp, Worm Gear Clamps, Dryer Vent Clamp, Dust Collection, Automotive, RV Clamp 5 pack (2 1/2\ Hose Clamps)

  • NO MORE TOOLS! – Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them..
  • 304 STAINLESS STEEL HOSE CLAMP- The 2 ½” diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home..
  • LARGE EASY TO TURN KEY - The easy to turn and easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen..
  • FLEXIBLE ADJUSTABLE SIZE RANGE- 2 1/2 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 2-7/8” (2.877” or 73.08mm) in full diameter down to appx. 1-7/8” (1.874” or 47.61mm) at its most compact diameter..
  • FLEXIBLE ADJUSTABLE SIZE RANGE- 2 1/2 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 2-7/8....
Check Stock

Pro Tie 33713-10 Regular Duty All Stainless Hose Clamp, Range 1-5/8\ To 16-1/2\ Diameter, 10 Pack

  • 1/2" wide band, housing, and hex head screw are all stainless steel.
  • Perfect hose Clamp for products up to 16" in diameter, especially large scale irrigation uses.
  • 5/16" hex head stainless screw with Phillips insert.
Check Stock

High Pressure Radial Shaft Seal 18-35-9mm BABSL DMHUI Oil Seal for Hydraulic Pump Motor

  • Excellent high temperature capabilities and compatible within a wide range of fluids.
  • Outer Diameter (In): 1.378 Inch, Outer Diameter (mm): 35mm.
  • Inner Diameter (In): 0.709 Inch, Inner Diameter (mm): 18mm.
  • DMHUI oil seals are widely recognized for quality and reliable performance for every type of repair. Provides long life while providing superior performance.
  • Oil seal with TS 16949 and ISO 9001:2008 Certificate.
Check Stock

High Pressure Radial Shaft Seal 22-40-7mm BABDUO DMHUI Oil Seal for Hydraulic Pump Motor

  • Excellent high temperature capabilities and compatible within a wide range of fluids.
  • Outer Diameter (In): 1.575 Inch, Outer Diameter (mm): 40mm.
  • Inner Diameter (In): 0.866 Inch, Inner Diameter (mm): 22mm.
  • DMHUI oil seals are widely recognized for quality and reliable performance for every type of repair. Provides long life while providing superior performance.
  • Oil seal with TS 16949 and ISO 9001:2008 Certificate.
Check Stock

High Pressure Radial Shaft Seal 35-52-5mm NBR BAKHDSN Oil Seal for Danfoss Hydraulic Motor MOS160

  • Excellent high temperature capabilities and compatible within a wide range of fluids.
  • Outer Diameter (In): 2.047Inch, Outer Diameter (mm): 52mm.
  • Inner Diameter (In): 1.378 Inch, Inner Diameter (mm): 35mm.
  • DMHUI oil seals are widely recognized for quality and reliable performance for every type of repair. Provides long life while providing superior performance.
  • Oil seal with TS 16949 and ISO 9001:2008 Certificate.
  • Package include: Nitrile Rubber Oil Seal 1PC.
Check Stock

High Pressure Radial Shaft Seal 25.4-44.45-6.35mm TC Oil Seal for Hydraulic Pump Motor

  • Excellent high temperature capabilities and compatible within a wide range of fluids.
  • Width (In): 0.25 Inch, Width (mm): 6.35mm.
  • Outer Diameter (In): 1.75 Inch, Outer Diameter (mm): 44.45mm.
  • Inner Diameter (In): 1 Inch, Inner Diameter (mm): 25.4mm.
  • DMHUI oil seals are widely recognized for quality and reliable performance for every type of repair. Provides long life while providing superior performance.
  • Oil seal with TS 16949 and ISO 9001:2008 Certificate.
Check Stock

High Pressure Radial Shaft Seal 28.56-42-5.5mm NBR BAKHDSN Oil Seal for Hydraulic Pump Motor

  • Excellent high temperature capabilities and compatible within a wide range of fluids.
  • Width (In): 0.217 Inch, Width (mm): 5.5mm.
  • Outer Diameter (In): 1.654 Inch, Outer Diameter (mm): 42mm.
  • Inner Diameter (In): 1.124Inch, Inner Diameter (mm): 28.56mm.
  • DMHUI oil seals are widely recognized for quality and reliable performance for every type of repair. Provides long life while providing superior performance.
  • Oil seal with TS 16949 and ISO 9001:2008 Certificate.
  • Package include: Nitrile Rubber Oil Seal 1PC.
Check Stock

DMHUI Brand High Pressure Radial Shaft Seal 10x25.4X6 CRWA5 Oil Seal for Hydraulic Pump Motor

  • Excellent high temperature capabilities and compatible within a wide range of fluids.
  • Outer Diameter (In): 1 Inch, Outer Diameter (mm): 25.4mm.
  • Inner Diameter (In): 0.394 Inch, Inner Diameter (mm): 10mm.
  • DMHUI oil seals are widely recognized for quality and reliable performance for every type of repair. Provides long life while providing superior performance.
  • Oil seal with TS 16949 and ISO 9001:2008 Certificate.
Check Stock

High Pressure Radial Shaft Seal 45-65-6mm BAFSL1SF DMHUI Oil Seal for Hydraulic Pump Motor

  • Excellent high temperature capabilities and compatible within a wide range of fluids.
  • Outer Diameter (In): 2.559 Inch, Outer Diameter (mm): 65mm.
  • Inner Diameter (In): 1.772 Inch, Inner Diameter (mm): 45mm.
  • DMHUI oil seals are widely recognized for quality and reliable performance for every type of repair. Provides long life while providing superior performance.
  • Oil seal with TS 16949 and ISO 9001:2008 Certificate.
Check Stock