Reviews Deck Screws For Treated Lumber

Swing Set Anchor Leveling Kit :: Includes Four Large Molded Rubber Blocks with Stakes and Hardware for Installation :: Keeps Your Swing Set Safe and Secure While Protecting Wood from Ground Moisture.

  • ...e Swing Set Brackets and Two Sets of A-frame Bracket Hardware, made of heavy gauge steel, solid welded joints, and a powder coated green finish will provide you with the brackets to build a top notch quality outdoor wooden swingset..
  • Each Jungle Gym Kingdom's welded, heavy- duty steel bracket is designed for two 4x4 treated posts, and one 4x6 treated post swing beam. These brackets include all wood screws and washers necessary to build your A-frame swingset. The hardware included is 3" galvanized lag screws and galvanized washers..
  • We recommend using only treated lumber (not included) to build your Jungle Gym Kingdom A-frame swingset. The lumber needed is 4 - 4x4 treated posts for the legs and 1 - 4x6 treated post for the top beam. Using only treated lumber with Jungle Gym Kigdom's heavy duty swing set brackets will ensure a top quality swing set to enjoy..
  • Jungle Gym Kingdom's brackets come with pre-drilled holes, and each Jungle Gym Kingdom steel bracket weighs approximately 10 pounds for maximum stability. Do not force lumber into the bracket, it should slide into the bracket with little force. If your treated lumber is still wet and swollen, it may create a tight fit in the bracket. If your treated lumber is dry, the wood will be easier to fit in th....
Check Stock

CAMO Drive Collated Edge Deck Screws 2-3/8 ProTech 1000 ct

  • For use in 1" and 2x (1-1/2") thick treated lumber, composite, capped composite, or PVC decking.
  • Edge Deck Screws install through the edge of the deck board, leaving a fastener-free surface.
  • Rake tip augers material out, Trimhead reduces visibility on edge, ProTech coating is ACQ Compatible.
  • 1000 ct package covers approximately 285 sq ft (joist spacing of 16 inches). Two(2) driver bits included.
  • Use exclusively with CAMO DRIVE: the stand-up deck fastening tool that makes installation 5X faster.
Check Stock

Imus Seal Butyl Joist Tape for Flashing Deck Joists and Beams (1-5/8” x 50’)

  • Self-adhering flashing tape for joists and beams designed to protect wooden deck structures from water damage and rot.
  • Provides a Barrier Between Metal and Wood.
Check Stock

Hillman Power Pro No 9 x 3 in L Star Flat Head Ceramic Coated Premium Deck Screws 5 lb 417 pk

  • Hillman Power Pro No. 9 x 3 in. L Star Flat Head Ceramic Coated Premium Deck Screws 5 lb. 417.
  • Power Pro premium exterior wood screws are perfect for decking and all other exterior wood projects..
  • These screws feature a no-strip star drive, countersinking blades, no split twist shank and no pre-drill, Bore-Fast thread. Material: Steel..
  • Power Pro premium exterior wood screws include a limited lifetime guarantee against rust and corrosion. Recommended for use with treated lumber..
Check Stock

Fastenmon Wood Screws 10 x 3 1/2 Inch 1200 pcs 21 lb Approx Type 304 Stainless Steel for Outdoor Wood Construction One T 25 Bit Included

  • SIZE: #10 x 3 1/2 inch 1200 pcs pack 21 lb approx. T25 star drive bit included..
  • STAINLESS STEEL 304 provides persistent CORROSION RESISTANCE and RUST FREE in most OUTDOOR application..
  • Use with Hardwood, Softwood, Wood Plastic COMPOSITE DECK material, and PRESSURE TREATED LUMBER like ACQ, CA, and CCA lumber..
  • MULTIPRPOSE CONSTRUCTION SCREWS use in Decks, Docks, Fences, Boardwalks, and Jetties, Finishing Millwork, projects require HIGH QUALITY..
  • STAR DRIVE, also known as TORX DRIVE, offers a stable fit resulting an easy drive and preventing “Cam Out”. Type 17 sharp point provides easy penetration and Self Drilling. FLAT HEAD with NIBS COUNTERSUNK resulting a flush surface with wood..
Check Stock

FastenMon Stainless Steel 304 Wood Screws #10 x 2 Inch - 100 Pieces 1 Pound Approx - Torx Flat Head Type 17 Point - Outdoor Deck Screws Including T25 Star Drive Bit

  • SIZE: #10 x 2 inch 100 pcs pack 1 lb approx. one T25 star drive bit included..
  • STAINLESS STEEL 304 provides persistent CORROSION RESISTANCE and RUST FREE in most OUTDOOR application..
  • Use with Hardwood, Softwood, Wood Plastic COMPOSITE DECK material, and PRESSURE TREATED LUMBER like ACQ, CA, and CCA lumber..
  • MULTIPRPOSE CONSTRUCTION SCREWS use in Decks, Docks, Fences, Boardwalks, and Jetties, Finishing Millwork, projects require HIGH QUALITY..
  • STAR DRIVE, also known as TORX DRIVE, offers a stable fit resulting an easy drive and preventing “Cam Out”. Type 17 sharp point provides easy penetration. FLAT HEAD with NIBS resulting a flush surface..
Check Stock

FastenMon Stainless Steel 304 Wood Screws #10 x 2-1/2 Inch - 1200 Pieces 15 Pound Approx - Torx Flat Head Type 17 Point - Outdoor Deck Screws Including T25 Star Drive Bit

  • SIZE: #10 x 2.5 inch 1200 pcs pack 15 lb approx. T25 star drive bit included..
  • STAINLESS STEEL 304 provides persistent CORROSION RESISTANCE and RUST FREE in most OUTDOOR application..
  • Use with Hardwood, Softwood, Wood Plastic COMPOSITE DECK material, and PRESSURE TREATED LUMBER like ACQ, CA, and CCA lumber..
  • MULTIPRPOSE CONSTRUCTION SCREWS use in Decks, Docks, Fences, Boardwalks, and Jetties, Finishing Millwork, projects require HIGH QUALITY..
  • STAR DRIVE, also known as TORX DRIVE, offers a stable fit resulting an easy drive and preventing “Cam Out”. Type 17 sharp point provides easy penetration. FLAT HEAD with NIBS resulting a flush surface..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ...board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ...board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

CAMO Edge Deck Screws 1-7/8' ProTech (1750 ct)

  • SELF-DRILLING POINT: Together, coarse screw threads and a self-drilling point design eliminate the need for a pilot hole.
  • FLAT-HEAD STYLE: Sits flush with material.
  • TAN CERAMIC COATING: 4-layer coating provides superior rust and corrosion protection.
  • STAR DRIVE STYLE: Also known as Torx, this drive is designed to reduce slippage and camout when tightening the screw.
  • FREE T25 STAR BIT: Free driver bit included in package to match screws and take the guesswork out of installation.
  • SAFE FOR TREATED LUMBER: Recommended for use with ACQ, CA, and CCA treated lumber.
Check Stock

Deck Plus 48401 Wood Screws #10 x 2-1/2', Green, 1lb Box

  • SELF-DRILLING POINT: Together, coarse screw threads and a self-drilling point design eliminate the need for a pilot hole.
  • FLAT-HEAD STYLE: Sits flush with material.
  • GREEN CERAMIC COATING: 4-layer coating provides superior rust and corrosion protection.
  • STAR DRIVE STYLE: Also known as Torx, this drive is designed to reduce slippage and camout when tightening the screw.
  • FREE T25 STAR BIT: Free driver bit included in package to match screws and take the guesswork out of installation.
  • SAFE FOR TREATED LUMBER: Recommended for use with ACQ, CA, and CCA treated lumber.
Check Stock

Deck Plus 48422 Wood Screws #10 x 3-1/2', Tan, 5lb Box

  • SELF-DRILLING POINT: Together, coarse screw threads and a self-drilling point design eliminate the need for a pilot hole.
  • FLAT-HEAD STYLE: Sits flush with material.
  • TAN CERAMIC COATING: 4-layer coating provides superior rust and corrosion protection.
  • STAR DRIVE STYLE: Also known as Torx, this drive is designed to reduce slippage and camout when tightening the screw.
  • FREE T25 STAR BIT: Free driver bit included in package to match screws and take the guesswork out of installation.
  • SAFE FOR TREATED LUMBER: Recommended for use with ACQ, CA, and CCA treated lumber.
Check Stock

#10 x 3 Inch Stainless Steel Deck Screws 350 Pieces | T25 Star Torx Drive Flat Head | 304 Grade Stainless Steel Wood Screws High Corrosion Resistance by Allen s Trading Co Eagle Claw Fasteners

  • TYPE 304 (18-8) GRADE 3 INCH STAINLESS STEEL DECK SCREWS for Decking, Fencing and general-purpose woodwork..
  • RECOMMENDED for use in all COASTAL, WET and OUTDOOR applications, including decks, balustrades, fences, jetties, walkways and general construction work..
  • HIGH CORROSION RESISTANCE means no more ugly rust stains on your beautiful outdoor timber structures..
  • SUITABLE for use with all HARDWOOD, SOFTWOODS and PRESSURE TREATED lumber, including Redwood and Cedar..
  • STAR DRIVE HEAD, Torx Driver Included. TYPE 17 POINT for easy driving (pilot holes recommended) . NIBS under the head help seat the screw. BURNISHED finish. Note that these are not self drilling screws..
Check Stock