Reviews Deck Cable Railing Kit

Steel DN Mate 100 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Steel Cable Railing Kit, Cable Railing Hardware, DIY Wood Baluster, Wrench Include, DM50

  • New design of deck cable railing kit, clean and elegant. This deck railing kit made of stainless steel T316 material, anti-rust, water, and corrosion, marine Grade, good for indoor or outdoor usage. It is suitable to DIY your stair railings, porch railing, terrace railings, and deck railings, With our new made wrench, installation becomes much easier..
  • This deck railing hardware fits 1/8" OD cable of the cable deck railing system. The thread lag screws are designed for timber/wood posts. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. This design can make wire deck railing hardware fits last longer..
  • Length of cable should be 1-1/2" shorter than wood surface distance（as shown in pic.4).
  • if you want to build a high-quality cable railing system, standard 1/8" (OD) cable which was made of T316-stainless steel is recommended..
  • The lag screws could be drilled into wood to adjust the tightness without an extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. A simple cost-effective cable ra....
Check Stock

Ingpro 80 Pack 316 Stainless Steel Left&Right Handed Thread Swage lag Screws for 1/8\ Decking Cable Railing Kit/Hardware,Wood Post Balusters (40 Pairs)

  • This cable railing kit（Single lag screw） made of high quality Marine Grade T316-Stainless Steel，It is anti-rust、 durable and easy to maintain；.
  • The angle of this professional Single-Screw cable railing hardware 0 to180 degrees could be free adjusted；So they can be used to all kinds of complex cable railing system：railing of stairs，deck railing and Garden fence…；.
  • This cable railing hardware applies to standard 1/8" inch cable（OD）， Hydraulic crimper is required to connect this kit with the cable and the 4-6# dies is suitable.
  • The length of the screw is 2 inch, Pre-drilling screw holes is required before installation；The turnbuckle fully extended length is 10 inch and fully shortened length is 6-3/4 inch (Size details are shown in the figure).
  • This kind of cable railing fitting advantage：high quality、easy to install and looks clean..
Check Stock

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance（as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle ....
Check Stock

Yaheetech Patio Deck Tiles Interlocking Wood Composite Deck Wooden Flooring Deck Tiles 12 x 12in Fir Wood Indoor&Outdoor Brown 55pcs

  • Specially for End Post - This cable railing kit is a great solution for posts up against a wall that you can't reach from behind, also ideal for single drilled end posts and corner posts to realize one-post corner solution. This deck railing hardware is installed by simply inserting it into the hole of drilled post and flipping the toggle.
  • Multi-Angled and Wide Adjustment - This tension wire kit can be rotated from 0-180 degrees for both horizontal and angled sections. This turnbuckle also has a wide adjustable range of up to 40ft in a straight run, making it much easier for beginners to install a cable railing system.
  • High Quality- The cable railing kit is made of T316 stainless steel, which is excellent in rust resistance and weather protection. Suitable for both indoor and outdoor, even coastal applications.
  • Pre-designed system- This product belongs to the SpaceSaver cable railing system, in which you can refer to how to build a cable railing project. It includes: Stainless steel side-mounted posts Muzata PF01.
  • Handrails (HT10-flat, HT20-round, HT30-thin).
  • cable cutter and hydraulic crimper CK12).
  • Adhesive washer CR74. For further information please scroll down to" product description" or....
Check Stock

Deck Man T316-Stainless Steel Adjustable Angle 1/8' Cable Railing Kit/Hardware for Wood Post，Marine Grade (10 Pack)

  • The angle of this professional cable railing hardware 0 to180 degrees could be free adjusted；So they can be used to all kinds of complex cable railing system：railing of stairs，deck railing and Garden fence….
  • This railing kit made of high quality Marine Grade T316-Stainless Steel，It is anti-rust、 durable and easy to maintain；.
  • It applies to standard 1/8″ inch cable， Hydraulic crimper is needed to connect this kit with the cable and 4# dies is suitable.
  • Max expanding size of the Swage Turnbuckle is 10 inch and it can be retract to 7 inch.
  • this item include 40 Pcs stainless steel countersunk screws and 1 pcs drill bit for wooden post, length of screws is 1.2inch；.
  • Under strict process control and with advanced technology, our products have high quality and excellent workmanship. We believe that you will like this kit..
Check Stock

Deck Man T316-Stainless Steel Adjustable Angle 1/8' Cable Railing Kit/Hardware for Wood Post，Marine Grade (30 Pack)

  • The angle of this professional cable railing hardware 0 to180 degrees could be free adjusted；So they can be used to all kinds of complex cable railing system：railing of stairs，deck railing and Garden fence….
  • This railing kit made of high quality Marine Grade T316-Stainless Steel，It is anti-rust、 durable and easy to maintain；.
  • It applies to standard 1/8″ inch cable， Hydraulic crimper is needed to connect this kit with the cable and 4-6# dies is suitable.
  • Max expanding size of the Swage Turnbuckle is 10 inch and it can be retract to 7 inch.
  • this item include 120 Pcs 304-stainless steel countersunk screws and 1 pcs drill bit for wooden post, length of screws is 1.2inch；.
  • Under strict process control and with advanced technology, our products have high quality and excellent workmanship. We believe that you will like this kit..
Check Stock

Lulultn Cable Railing Hardware, 30 Pairs Cable Railing Kit,Steel Cable Railing Kit,for 1/8 Cable Railing System, Adjustable Angle,T316 Marine Grade

  • Uses: This kit needs to be connected to the cable using a hydraulic crimping machine, it can be used for inclined stair railings or horizontal cable guardrails, deck railings and garden fences.
  • Material: The railing kit is made of high quality marine grade T316 stainless steel, which is rust-proof, more durable and beautiful and easy to maintain.
  • Features:Fit for 1/8″ stainless steel cable,This adjustable angle cable railing kit has 180° angle freedom adjustable base, suitable for outdoor or indoor use.
  • Dimensions: 1/8″ inner diameter, ideal for connecting to 1/8 inch stainless steel cable to wood post and metal post.
  • Packaging: 30 Pcs Deck Toggle Turnbuckles, 30 Pcs Deck Toggle Ends and 123 Pcs (3 spare) of stainless steel countersunk head screws and 1 pcs drill bit for wooden post, 1 pcs tightening rod,1 multifunctional small wrench ..
Check Stock

kjxxkj Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8 inch Cable Railing Kit,Decking Railing Hardware,DIY Baluster Kit (30 Pairs）

  • This cable railing kit include 30-pcs right and 30-pcs left hand thread lag screws.
  • Kit made of T316 –stainless steel，So it can be used indoor and outdoor；.
  • This deck railing hardware fit 1/8-inch OD cable of railing system，The thread screws were designed for wood post，Length of lag screw is 4 inch and length of its thread is 2 inch；.
  • This swage lag screws used Integrated design，So this kit will make your installation more easier、beautiful and secure, But connection of cable with lag screws need by using hydraulic crimper；.
  • Note：Length of cable should be 1.5 inch shorter than wood post edge distance（as shown in fig.3).
  • If you want To DIY a high quality railing system，Standard 1/8 in(OD) cable which was made of T316-stainless steel is recommended(Please seach B0798NLB8L to purchase the right cable).
  • By the design of Right&left handed thread, Of course it can be used to adjust the tightness of cable, So the turnbuckles are not needed in the railing system, And this cable railing can’t be easily unfixed and damaged by outsiders..
Check Stock

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ 3/16\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR91,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(5mm),OD-3/4"(19mm),thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32" 3/16" cable on level, fit 1/8" 5/32" cable at 30°angle. Please check the image to find the compatibility table for further models. Cable railing kit CR73 is recommended to work with CR91 for wood invisible cable railing system.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System - We pre-designed a CableGenie wood cable railing system to help you get a fully customized project, which includes cable railing kit CR73,1/8” wire rope WR02, adhesive sleeve CR91, drill guide CT19, crimper and cutter CT01, socket wrench ....
Check Stock

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR66,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(4.5mm), OD-5/8"(16mm), thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32"cable on level applications, ONLY fit 1/8" cable on 30°angle. Please check the image to find the compatibility table for further models. Cable railing kits Muzata CR26 is recommended to work with CR66 to let your cable railing system look neater.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you get a fully customized project, which includes cable railing kit CR26, angled beveled washer CR60, 1/8” wire rope WR02, adhesive sleeve CR66, protector sl....
Check Stock

Muzata 20Set 1/8" Cable Railing Kit Hardware Heavy Duty Turnbuckle M5 Eye to Eye for Wood Post Wire Rope Stainless Steel Angle Adjustable WoodLoft System Deck Stair 20 Cable Lines CK01,CA4 CA5

  • Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 20pcs M5 eye to eye turnbuckle, 40pcs thimbles, 40pcs eye straps, 40pcs aluminum sleeves, 80pcs screws. This set can build 20 cable runs, including tensioners and terminals.
  • Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
  • Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
  • Pre-Designed System - We pre-designed a WoodLoft cable railing system ....
Check Stock

Muzata 10Set 1/8" Cable Railing Kit Hardware Turnbuckle M5 Eye to Eye CK01 and 165Ft Wire Rope WR01 and CR12 for Wood Post Stainless Steel Angle Adjustable WoodLoft System 10 Cable Lines,CA4 CA5

  • Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 10pcs M5 eye to eye turnbuckle,20pcs thimbles,20pcs eye straps,20pcs aluminum sleeves,40pcs screws,1pcs cable cutter,330ft wire rope. This set can build 10 cable runs, including tensioners and terminals.
  • Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
  • Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
  • Pre-Designed System - We pre-designed a ....
Check Stock

Muzata 10Set Cable Railing Kit 1/8' Swage Lag Screw Turnbuckle Hardware Tensioner T316 Stainless Steel for Wood Post System Angle Stairs Deck 10 Cable Lines CK13,CA4 CA5

  • Elegance Look and Anti-twist- This cable railing fitting is well-designed in one piece to provide a pretty and elegant appearance. The turnbuckle could be adjusted from 8 3/16” to 11 1/32” to tighten the wire rope. Moreover, with right and left handed thread swage lag screws, wire rope can rotate in the same direction without twisting or damaging. Package includes: 10 right-hand turnbuckles, 10 left-hand terminals, 1pc bent wrench. It can make 10 cable runs.
  • For Level and Angle – This cable railing kit could work for both level and stair railings. That allows you to keep the same style on the level and angle sections. Recommend using with our patent angle drill guide Muzata CT19 to drill multi angle holes.
  • Marine Grade – This deck railing kit is made of T316 marine grade stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • WoodElegance System – We pre-designed a WoodElegance cable railing system to help you get a fully customized project. It includes cable railing kits Muzata CK13, level and angled protector sleeve (CR13-level, CR68-25-35°), 1/8″ wire rope Muzata WR01, hydraulic crimper and cutter set Muzata CK12, drill guide Muzata CT09. (Please not....
Check Stock