Mini Desktop Multimeter, 55000 Counts 3.7in LCD Digital Multi Tester, AC / DC Current, AC / DC Voltage, Resistance, Capacitance(US Plug)
- Compact and accurate, Just a little bigger than your smart phone, easy to bring along..
- Features 9999 Counts Backlight AC DC Current Voltage Resistance Frequency Capacitance Square Wave Output Auto/Manual Ranges.
- Square-wave generator can output a 5v PP pulse train up to 5Mhz..
- Frequency: 0.01Hz to 9.999MHz. Capacitance: 0.001nF to 9.999mF. AC volts: 0.001mV to 750V & DC volts: 0.001mV to 999.9V..
- AC current: 0.01uA to 9.999A & DC current: 0.01uA to 9.999A. Resistance: 0.01Ω to 9.999MΩ. (Battery not included).
Check Stock2022 Everlast PowerTIG 210EXT 210amp Ac Dc Tig Stick Advance Pulse Welder 110/220 Volt Inverter-based IGBT Technology
- Microprocessor control offers precise management of welding parameters and functions..
- Portable and Lightweight design offers rugged exterior and a flip down visor to protect panel from sparks and damage..
- Offers standard type pulse feature for AC and DC, and a special Advanced Pulse for AC for welding thin material, increasing travel speed and reduces warping..
- Can be used with optional finger amp control torch..
- Wave form control offers 3 types of wave form for AC welding: Triangular Wave, Advanced Square Wave, and Soft Square Wave..
Check StockHantek 6074BD Oscilloscope with AWG, PC USB oscilloscope 4 Channels 70MHz Bandwidth 1GSa/s Sample Rate
- 2 Channel Digital Oscilloscope + Arbitrary/Function Waveform Generator + Synchronizing Signal + External Trigger.
- The Keys for osilloscope and waveform generator is seperated for convenient to operate it simultaneously.
- Large and clear display (7 inch 64K color LCD display, Resolution 800x480), more clear and realistic waveform.
- Oscilloscope: 1GSa/s Sample Rate, 200/100/70MHz Bandwidth, more than 20 kinds of auto measurement functions.
- Powerful Trigger Function: Edge, Video, Pulse, Slope, Over time, Alternative003cbr003e 6.Arbitrary/Function Waveform Generator: 25MHz, 12 bits resolution, 200MHz DDS, Arbitrary wave/square wave/sine wave/triangle 7.wave/trapezoidal wave/pulse wave/DC is easy to simulate transducer.
Check Stock1HZ-500KHZ DDS Functional Signal Generator, Seesii DDS Function Low Frequency Signal Generator Sine/Triangle/Square/Sawtooth Waveform
- 1HZ-500KHZ DDS signal generator is small but has many functions, easy to operate and carry. The power supply can be either AC/DC adaptor or a battery..
- It can be used with oscilloscope to test and debug electronic circuit, the frequency response of audio amplifier and impulse response,It also can calibrate the sweep time factor of oscilloscope..
- The square waveform is suitable for oscilloscope attenuator and the adjustment of probe impulse response..
- Have a filter (can be opened and closed) to suit the output of sine wave and pulse wave..
- This functional signal generator can test many kinds of wave forms such as: sine, square, triangle, positive and negative sawtooth waveform. It is especially designed for those professional worker..
Check Stock
Pulse Generator, DROK 2pcs LCD Display PWM Frequency 1Hz-150kHz Duty Ratio 0-100 Percent Adjustable Square Wave Rectangular Wave Signal Generator Board
- DROK pulse generator module operating voltage range is DC 3.3-30V, adjustable pwm frequency range is 1Hz-150kHz, adjustable duty ratio range is 0%-100%..
- Application: it can be used as a square wave signal generator, generate square wave signal for experimental development.
- generate square wave signal to control the motor driver.
- generate adjustable pulse to control the relevant circuit (PWM dimming speed application etc)..
- High Frequency Resolution: frequency in range 1Hz~999Hz, display resolution is 1Hz.
- range 1.00kHz~9.99kHz, display resolution is 0.01kHz.
- range 10.0kHz~99.9kHz, display resolution is 0.1kHz.
- range 1kHz~150kHz, display resolution is 1kHz..
- TTL Level Communication: the frequency meter is designed with single-chip TTL level communication, communication standard is 9600 bps..
- LCD Display: the blue LCD clearly displays frequency and duty ratio, PWM output can set frequency and duty ratio independently..
Check StockPWM Pulse Frequency Generator, Icstation Signal Generator Module DC 3.3V-30V Function Generator 5-30mA 1-Channel 1Hz-150kHz PWM Pulse Frequency Duty Cycle Square Wave LCD Display
- ⇝PWM Pulse Frequency module work voltage range is DC 3.3V-30V.
- the frequency range is 1Hz-150kHz/1Hz-15kHz.
- ⇝PWM frequency supports 2 modes:normal mode & accurate mode.Regular mode with 1% duty cycle steps.Precision mode with 0.1% duty cycle steps..
- PWM output can set frequency & duty cycle separately.
- duty cycle upper and lower bounds adjustable.
- ⇝Square wave signal generator, generating square wave signal for experimental development, generating square wave signal that controls the motor driver, and generating adjustable pulses for MCU Dimmer.
- ⇝There is no output voltage control. The output voltage is the same as the input voltage. That can be easily changed by adding a simple potentiometer..
Check Stock
Hantek Professional Automotive Oscilloscope 2D82AUTO, 4 in 1 Handheld Oscilloscope Multimeter, Digital USB Oscilloscope with 2 Channels 80 MHz Bandwidth, Oscilloscope Kit 2D82 III
- 4CH oscilloscope,with 1CH Arbitary/function waveform generator,independent keys of oscilloscope and waveform generator which is easy to operate at the same time..
- 250MHz bandwidth, minimum measurement range 500μV /div,1GS/s sample rate,advanced digital trigger system,high trigger sensitivity..
- The high-resolution 7-inch color LCD screen (800x480 pixels),provides more than 14 trigger functions: edge, overtime, pulse, pattern, interval, etc..
- Function/arbitrary signal generator25MHz,12BitS resolution, 200MHz DDS, ARB/square wave/sine wave/triangular wave/trapezoidal wave/impulse wave/DC etc.,easy to simulate the sensor..
- Before use,please read the instructions enclosed with the product.If you have any questions about the product, please contact us promptly.We will provide you with 100% satisfaction guarantee and perfect service..
Check Stock1HZ-500KHZ FG-100 DDS Functional Signal Generator Frequency Meter Signal Source Module Frequency Counter
- Feature FG-100 DDS Function generator is a low frequency signal generator..
- It is small size, full function, easy operating and portable. Its power supply can be either AC/DC adaptor or a Lithium battery..
- Working with an oscilloscope, it can be used to troubleshoot the electronic circuit, characterize the audio amplifier frequency response or measure the impulse response..
- Due to the excellent DSS accuracy and frequency stability, it can also be used to calibrate the sweep time factor for oscilloscopes. You can also use its square wave to calibrate your oscilloscope attenuator or adjust your oscilloscope probe.
- Have a filter (can be opened and closed) to suit the output of sine wave and pulse wave..
Check StockSignal Generator, DROK DC 3.3-30V Function Generator 5-30mA LCD Display PWM Pulse Frequency Duty Cycle Rectangular Wave Square Wave Signal Generator
- PARAMETER ---- operating voltage range DC 3.3v~30v.
- APPLICATION ---- as square wave signal generator for experimental development.
- as square wave signal generator for motor driver.
- as pulse generator, control related circuits (PWM dimming, speed regulating)..
- SERIAL COMMUNICATION ---- support serial communication, TTL level..
- DATA AUTO STORAGE ---- all parameters will be saved automatically after setting and therefore won't lose when power off..
- OTHER FEATURES ---- with LCD display to display frequency and duty cycle value.
- PWM output, can set frequency and duty cycle separately by buttons.
- frequency value is divided into 4 range and switched automatically, with high precision..
Check Stock2021 PowerTIG 325EXT 320amp DIGITAL AC/DC TIG Stick Pulse welder 220 Volt Inverter-Based AC DC
- Lightweight and portable 208/220/240/ 1PH and 3PH unit.
- Digital/Micro-controlled // 320A/ 20V @ 60% Duty Cycle/ 40º C.
- AC Wave Forms: Advanced Square /Soft Square / Triangular / Sine.
- DC Pulse Frequency: .1-500 Hz / Standard AC Pulse Frequency: .1-250Hz.
- Hot Start Amps: 0-100% Stick : Adjustable Arc Force Control Stick Hot Start Typ:Adjustable Hot Start.
Check StockPWM Pulse Generator, DROK Dual Mode Adjustable Function Generator DC 3.3-30V 1-150kHZ 1-9999 Variable Pulse Width Frequency Duty Cycle Square Rectangular Wave Signal Generator Module with Case
- PARAMETER — working voltage DC 3.3-30V.
- DUAL MODE — the signal generator has 2 modes, PWM mode (default) & pulse mode..
- APPLICATION — the signal generator module can be used to generate square wave rectangular wave signals for controlling DC motors or stepper motor driver.
- for servo motors, stepper motors, electric jaws, PLC pulses replacement, etc..
- PROTECTION — with anti-reverse protection, 5.08mm terminal wiring..
- EASY TO OPERATE — the signal generator can control start or stop, it can also connect the external switch to control the output signal ON/OFF..
Check StockUNI-T UTG932 + UTP1306, Function Generator and Switching DC Power Supply Kit
- Mini palm-sized signal generator Palm-sized signal generator, your personal signal output source, bring you a different sense of experience.
- 60 MHz MAX. OUTPUT FREQUENCY 200 MSa/s SAMPLE RATE 14 bits VERTICAL RESOLUTION 2 CHANNELS - ARBITRARY WAVE LENGT.
- Standard 2 Channel, multiple waveform signals Maximum output frequency 60MHz, dual channel, multiple waveform signals: sine wave, square, ramp, pulse, noise, DC, arbitrary waveform.
- Modulation function Easy-to-use modulation types: AM, FM, PM, FSK Built-in 24 arbitrary waveforms 24 kinds of non-volatile digital arbitrary waveform storage.
- UTG932E 30 MHz 200 MSa/s 14-bit 2 UTG962E 60 MHz 200 MSa/s 14-bit 2.
Check StockEcosmart FSA QC MEDLRG ECO 24 Replacement Part
- Allow compression:Water pressure 1.75 Mpa below.
- Output Waveform:Square Wave,output pulse signal..
Check Stock
