Reviews Dbb Lock Mortiser By Souber

Power8 CEL POWER8 Create Plus, All-In-One Multi-function Combo Tool Kit, Armored Case & Accessories (P8-CP1)

  • Souber DBB Carbide Tipped Wood Cutter 1" (25.4mm).
  • For use with the DBB Lock Mortiser by Souber.
Check Stock

Souber DBB Mortiser Carbide Tipped Wood Cutter 1-1/4\ (31.8mm)

  • For use with small bore cutters PSCWB13 (13.2mm) and PSCWB15 (14.6mm).
Check Stock

RIKON Professional Power Tools Benchtop X/Y Mortiser, 34-260

  • BENCHTOP MORTISER - This benchtop X-Y Mortising Machine gives precision positioning of your work for boring mortises because of the sliding X-Y axis table..
  • POWERFUL - With powerful ½ HP Motor with 1750 RPM this motor quickly cuts mortises in the toughest woods without stalling..
  • CONSISTENT CUT - Use this benchtop mortiser with dovetail column ways with adjustable stop for solid, consistent cutting of multiple mortises..
  • STABILIZED - Feel safe with your consistent work because this benchtop has a gas filled stabilizer that helps control downward and upward chisel motion during your hard work..
  • CONTROL - The X - Y directional table with stops provides ultimate positioning control for boring mortises and allows you to focus on the work. For ultimate control use this Rikon benchtop mortiser for all of your needs..
Check Stock

DUEBEL Door Lock Hole Opener Kit for Installing Doors Lock Mortiser Kit for Wooden Doors Mortising Machine Door Lock Installation Kit Mortise Jig

  • 【APPLICATION】DUEBEL door lock hole opener kit is designed for installing hotel doors, security doors and door lock modifying. The door lock jig....
  • 【WIDE ADAPTABILITY】Pro door lock hole mortising jig for solid wood doors-varied thickness. Putting lock holes into an expensive door panel can be....
  • 【EASY TO USE】The mortice lock fitting jig is simple to understand and easy to use for professional carpenters and new users. But if you are new....
  • 【3 CUTTER BITS: 18/22/25 MM】It has 3 different hole cutters (Sizes: 18/22/25 mm) made of Tungsten Carbide (TC) steel, higher quality over....
  • 【EASY TO CARRY】The door lock mortiser kit is made mostly of steel, total weight with case: 9.37 lb (4.25 kg). The mortise jig comes in a large....
Check Stock

PORTER-CABLE Door Hinge Template (59370)

  • Quick And Easy Set Up With Lock-In Pins To Ensure Security.
  • Complete With Double Headed Nails For Easy Removal.
  • Included Along With The Template Are A High-Speed Mortise Router Bit With Bearing Brads, Instructions.
  • 8 Hinge Sizes From 2-1/2 Inch To 6 Inch And 5 Door Sizes From 1-3/8 Inch To 2-1/2 Inch.
  • Quick and easy set up with lock-in pins to ensure security.
  • Complete with double headed nails for easy removal.
  • Included along with the template are a high-speed mortiser router bit with bearing brads, instructions.
  • 8 hinge sizes from 2-1/2 inch to 6 inch and 5 door sizes from 1-3/8 inch to 2-1/2 inch.
  • Made from Fiberglass, reinforced plastic with extended platform for better router stability.
Check Stock

5304440323 Door Handle Compatible with Frigidaire Microwave

  • Part Numbers: 5304440323, AP3774313, 1063067, AH979589, EA979589, PS979589.
  • High Quality, non-OEM Replacement Door Handle Compatible with Frigidaire Microwave.
  • Fits Models: CFMV156DBC, CFMV156DBD, CFMV156DBE, CFMV156DCB, CFMV156DCD, CFMV156DCE, CFMV156DCF, CFMV156FMA, CFMV156FMB, CFMV156FMC, CGLMV169DBB, CGLMV169DBC, FMV156DBA, FMV156DBB, FMV156DBC, FMV156DBD, FMV156DBE, FMV156DBF, FMV156DCA, FMV156DCB.
  • FMV156DCC, FMV156DCD, FMV156DCE, FMV156DCF, FMV156DCG, FMV156EMA, FMV156EMC, GLMV169DBA, GLMV169DBB, GLMV169DBC, GLMV169DBD, GLMV169DBF.
Check Stock

Ryobi A99LM2 Door Latch Installation Kit for Accurate Chiseling and Scoring

  • 【Wide Application】 The mortising jig kit is widely used to open new lock hole, open eccentric lock hole, change password lock and change fingerprint lock on wooden doors. You can also use this lock mortiser kit to modify door locks..
  • 【Applicable Door Range】 The lock mortising kit fits wooden doors of 25-100mm (0.98-3.93 inch) thickness. The maximum opening groove depth is 130mm (5.1 inch), and maximum opening groove length is 260mm (10.2 inch)..
  • 【High Efficiency & Precise Slotting】 The mortise lock installation kit is much faster, easier, and more precise than using a drill and chisels. You only need to spend ten minutes or even a few minutes to finish the slot. Extremely precise, accurate !.
  • 【3 Tungsten Steel Drill Bits】 Tungsten steel alloy cutter head has the characteristics of high hardness, sharpness and not easy to wear. It is special for wooden door. The package includes 3 drill bits. Sizes: 18/22/24 mm (0.79/0.87/0.95 inch)..
  • 【Warranty】We provide 30 days free replacement or money back guarantee and life-time customer service. If you have any problems, please feel free to tell us and we will get back to you within 24 hours..
Check Stock

Sangean DT-800YL AM / FM / NOAA Weather Alert Rechargeable Pocket Radio Yellow

  • AM/ FM/ NOAA weather alert radio, receives all 7 NOAA weather channels with Automatic Alert that Warns you of Hazardous Conditions.
  • 45 Memory station presets (20 FM, 20 AM, 5 WX) with page button, Adjustable Tuning Step, APS - Auto Preset Setting, Auto Scan Stations and Adjustable....
  • Built-in battery charger with DC in（5v/ 0. 5A) micro USB B Type Socket for charging.
  • Easy to Read LCD Display with Backlight, Alarm Timer by Buzzer, Snooze Function, Adjustable Auto Shut Off and Soft mute to reduce background noise.
  • Built-in high quality speaker with DBB (dynamic bass boost) with Battery Power Indicator, Lock Switch and Stereo Headphone Output.
Check Stock

Sangean DT-120 AM/FM Stereo PLL Synthesized Pocket Receiver, WHITE

  • Direct Recall 15 Station Presets (10 FM, 5 AM), Auto Seek Station.
  • Built-in Real Time Clock, Signal Strength Indicator, Adjustable Tuning Step.
  • DBB (Dynamic Bass Boost), Stereo / Mono Switch, 90 Minute Auto Shut Off.
  • Lock Switch Battery, Power Indicator, Handheld Size.
  • Power Source: 2 X AAA size / UM-4 batteries, I/O Jacks: Headphone.
Check Stock

Door Lock Hole Opener Kit, Lock Mortiser for Wooden Doors, Door Lock Installation Kit Mortising Machine Mortise Jig with 3 Drill Bits

  • 【Wide Application】 The mortising jig kit is widely used to open new lock hole, open eccentric lock hole, change password lock and change fingerprint lock on wooden doors. You can also use this lock mortiser kit to modify door locks..
  • 【Applicable Door Range】 The lock mortising kit fits wooden doors of 25-100mm (0.98-3.93 inch) thickness. The maximum opening groove depth is 130mm (5.1 inch), and maximum opening groove length is 260mm (10.2 inch)..
  • 【High Efficiency & Precise Slotting】 The mortise lock installation kit is much faster, easier, and more precise than using a drill and chisels. You only need to spend ten minutes or even a few minutes to finish the slot. Extremely precise, accurate !.
  • 【3 Tungsten Steel Drill Bits】 Tungsten steel alloy cutter head has the characteristics of high hardness, sharpness and not easy to wear. It is special for wooden door. The package includes 3 drill bits. Sizes: 18/22/24 mm (0.79/0.87/0.95 inch)..
  • 【Warranty】We provide 30 days free replacement or money back guarantee and life-time customer service. If you have any problem....
Check Stock

Door Hinge Jig, Door Hinge Mortiser, Hinge Installation Kit, Door Hinge Router Template Fits for Door Hinge from 3” to 5” Length and 1/4” or 5/8” Thickness.

  • 【Intergrated Door Hinge Mortiser.】 Thanks to two removable plastic inserts, our door hinge installation kit is a fantastic accessory to have on hand for cutting and installing door hinges of round or sqaure corner hinges. This jig allows you to cut professional looking mortises in the doors of hinge from 3” to 5“ length and 1/4” and 5/8“ thickness. (Template Size: 7.8” L×3.5”W×2”H.).
  • 【Easy to Install and Use.】The hinge router template can be adjusted for both hinge length, thickness, and round vs. square corners. Also, it has a built-in depth gauge on the side for the attached router bit to set depth and comes with a self-centering hinge bit to ensure hinges screws are perfect. The corner pieces for routing different radius hinges work well too..
  • 【No Need for a Hammer and Chisel.】You just need to use this hinge template and a router or compact router to install your door hinge.(Router not included) Located on outer wall of routing area, just set the depth by using the router bit depth gauge and cut out the door hinge shape from template area.(Thin hinges: 3”,3-1/2”.4” on the left and thick hinges: 4-1/2”,5” on the right.) Definitely better and faster than using a Chisel..
  • 【Durable and Reliable Structure.】Made of....
Check Stock

KONDUONE 5304440323 Durable Door Handle Black Replacement for Frigidaire Microwave Door Handle - Replace 1063067 AP3774313 PS979589 EAP979589 PD00007889

  • ...PS979589 EAP979589. Please check the compatibility with your previous part and appliance’s model before you purchasing this replacement..
  • ✅[FITS THE FOLLOWING MODELS] – CFMV156DBC , CFMV156DBD , CFMV156DBE , CFMV156DCB , CFMV156DCD , CFMV156DCE , CFMV156DCF , CFMV156FMA , CFMV156FMB , CFMV156FMC , CGLMV169DBB , CGLMV169DBC , FMV156DBA , FMV156DBB , FMV156DBC , FMV156DBD , FMV156DBE , FMV156DBF , FMV156DCA , FMV156DCB , FMV156DCC , FMV156DCD , FMV156DCE , FMV156DCF , FMV156DCG , FMV156EMA , FMV156EMC , GLMV169DBA , GLMV169DBB , GLMV169DBC , GLMV169DBD , GLMV169DBF..
  • ✅[LIFETIME WARRANTY] – This door handle comes complete with a lifetime warranty. Save money off of dealer prices and restore function of your microwave door handle. If the part ever fails on your microwave, please contact us for troubleshooting help..
Check Stock

Wish You Were Here

  • ...ch 489105-00 On-Off Toggle Switch For Compatible with Delta Table Saw.
  • ⭐REPLACES NUMBE:Compatible with 31-695 Type 2 Sander 31-780 Type 1 Sander SA180 Type 1 Belt/Disc Sander 22-540 Type 1 12 inch Planer 22-560 Type 1 Planer 22-565 Type 1 Planer 28-150 Type 2 Band Saw 23-675 Type 1 Grinder / Finisher 14-650 Type 1 Mortiser LA200 Type 1 Lathe 31-325 Type 1 Grinder/Sander TS300 Type 2 Bench Table Saw TS350 Type 1 Bench Table Saw SH100 Type 1 Bench Shaper AP300 Type 2 Air Collector Management SA180 Type 2 Stationary Sander 34-670 Type 2 10 Inch Table Saw JT360 6".
  • ⭐WORKS FOR BRANDS: Compatible with GR450 Type 1 8" 1 6"Tool-less Quick Change Variable-Speed Grinder TP305 12-1/2" Portable Planer DP300L 12" Crosshair Laser Drill Press 17-900 Type 2 16-1/2" Drill Press 36-600 Type 2 Table Saw 50-075 Type 1 Single Stage Collector 50-665 Type 1 1.5Hp 2 Stg Collector 14-070 Type 1 14" Floor Drill Press DP200 Type 1 10" Drill Press DP400 Type 1 Drill Press GR250 Type 1 6" Bench Grinder with Lamp 46-250 Type 2 Midi-Lathe 36-610 Type 2 Table Saw 36-380 Type 1 Xl-10.
  • ⭐Specifications: Voltage: 125/250V Amperage: 20/12A Terminals: Two,On-Off Toggle Switch replaces Compatible with Delta 489105-00, 1343758 (Optional Lock).On-Off Toggle Switch replaces Compatible wit....
Check Stock