Reviews D24wet Tile Saw

VIYUKI Tile Cutter Saw Portable Wet Cutting Porcelain Tile Cutter Table Saw 7-Inch Wet Tile Saw

  • Tile Saw Wet Product Parameter: 120V/60Hz/5A/7" Blade x2, and easy-to-use perfect for any DIY home projects..
  • Wet Tile Saw 7 inch High-quality tool: Adjustable rip fence with miter gauge for accurate straight and miter cuts.
  • Professional Blade water cooling system: Tile saw blade 7-inch wet saw, keeps the blade cool and minimizes dust and debris. The panel of the machine is stainless steel to prevent rust..
  • Professional induction motor - supply generates up to 3,560 RPM..
  • Pack your satisfaction with the quality: Wet tile saw with a manufacturer warranty you can be sure you will get a quality tile saw.we will supply a new one with any flaw on the package or some quality problems..
Check Stock

Tile Cutter Hand Tool Cut Floor Tile Glass Tile Cut Tiles Straight or Quarter Curve Manual Tile Cutter Tool for Cutting Wall Tile Porcelain Tile and Glass Tile Faster and Cleaner than a Wet Tile saw

  • For Straight Lines And Up to A Quarter Circle Curve The Tile Cutter Is Great, For Semi Circles Inside Corner Cut Outs Around Outlets Doorways And Toilets You Will Want Kit 1 With Tile Hack Saw Blade For Wall Tile And 4 1/2" Grinder Diamond Tile Blade For Porcelain And Floor Tile, Kit 2 Has Tile Drill Bits For Ceramic And Diamond Drill Bits For Porcelain And Glass To Drill Holes For Grab Bars Shower Doors And Towel Rails, Kit 3 Includes Diamond Tile Hole Saw And Guide For Shower Head Or Faucets..
  • No Wet Saw Rental No Messy Tile Saw, Even Professional Tile Setters Don't Like the Mess a Wet Tile Saw Makes and Even the Best Diamond Blades Can Chip the Edges of The Tiles Forget About Cutting Glass Mosaic Backsplash Tiles on Mesh with Water Saw They Chip Scrunch Up Fly Away and When They Get Wet, They Fall Off Anyway. So, You End Up Pushing Each Tiny Tile Through the Wet Saw with What’s Left of Your Fingers. So, No More Running in And Out the House with Every Tile for Every Single Cut..
  • Not the Old-Fashioned Glass and Tile Cutter It's Not Sharp Its Hard, You Must Apply Pressure to Tile Cutting Wheel to Work Only Work If You Soak Cutter Wheel in Oil and Keep Oiling. Score Tile at Waist Height Not on a Floor. Must Use 2 Hands to Score Hard Tile Never Hold Cu....
Check Stock

Tile Cutters Tile Tools for Cutting Ceramic Tile Glass Tile Cut Straight Lines and Curved Lines Cleanly No Wet Saw No Mess Cut Faster and Cleaner than a Wet Tile saw Replaceable Blade Cuts 1000 Feet

  • For Straight Lines And Up to A Quarter Circle Curve The Tile Cutter Is Great, For Semi Circles Inside Corner Cut Outs Around Outlets Doorways And Toilets You Will Want Kit 1 With Tile Hack Saw Blade For Wall Tile And 4 1/2" Grinder Diamond Tile Blade For Porcelain And Floor Tile, Kit 2 Has Tile Drill Bits For Ceramic And Diamond Drill Bits For Porcelain And Glass To Drill Holes For Grab Bars Shower Doors And Towel Rails, Kit 3 Includes Diamond Tile Hole Saw And Guide For Shower Head Or Faucets..
  • No Wet Saw Rental No Messy Tile Saw, Even Professional Tile Setters Don't Like the Mess a Wet Tile Saw Makes and Even the Best Diamond Blades Can Chip the Edges of The Tiles Forget About Cutting Glass Mosaic Backsplash Tiles on Mesh with Water Saw They Chip Scrunch Up Fly Away and When They Get Wet, They Fall Off Anyway. So, You End Up Pushing Each Tiny Tile Through the Wet Saw with What’s Left of Your Fingers. So, No More Running in And Out the House with Every Tile for Every Single Cut..
  • Not the Old-Fashioned Glass and Tile Cutter It's Not Sharp Its Hard, You Must Apply Pressure to Tile Cutting Wheel to Work Only Work If You Soak Cutter Wheel in Oil and Keep Oiling.....
Check Stock

Ceramic Tile Cutter Tile Saw Tile Tools Kit 1 Tile Cutter Hand Tool, 1 Tile Saw 1 Diamond Blade 4.5 For Cutting Porcelain Tile Cut Straight Curves Corners and Outlets in Center Tile Without a Wet Saw

  • TILING KIT 1 1x AMAZING TILE AND GLASS CUTTER, 1x TUNGSTEN CARBIDE GRIT ROD SAW BLADE,1x GRINDER BLADE for Outlets and Corners in Floor Tile And Porcelain. 1x BOTTLE OF OIL FOR GLASS CUTTER, 1x INSTRUCTIONS AND HOW TO VIDEO LINKS LIFETIME GUARANTEE.
  • NO WET SAW RENTAL NO MESSY TILE SAW CUTTER : Even Professional Tilers don't like the mess a wet saw makes and that even the best diamond blades can chip the edges of the tiles, and forget about cutting glass mosaic backsplash tiles on a mesh with a water saw, they chip, scrunch up, fly away, and when they get wet they fall off anyway. So you end up pushing each tiny tile through the wet saw with what’s left of your fingers..
  • NO RUNNING IN AND OUT THE HOUSE From the Basement or The Driveway, Trailing Through The House Up and Down The Stairs in the Freezing Rain or Burning Sun a Thousand Times with Every Single Tile For Every Single Cut, You Can't use a Wet Saw in The House - She Won't Let You ! She’s Right It's Way Too Messy! And If you do, you’ll be in Marriage Guidance, and still be finding bits 20 years from now.
  • HOW TO CUT GLASS MIRROR STAINED GLASS SHEETS With Other Hints Tips And Trade Secrets. Do You Know Anybody That Didn’t Break The Last Piece Of Glass They Tried To Cut? That's Because 99% Of....
Check Stock

Super Thin 7" Diamond Ceramic Saw Blade Porcelain Cutting Blade for Cutting Ceramic Or Porcelain Tile

  • 【Size & Material】: This tile blade is made of quality metal alloy with diamond grains, which is durable and high strength. Available in various sizes to choose, the size is: 180 x 10 x 1.4 x 22.23mm, Thickness: 1.4mm, Outer Diameter:105mm /7 inch, 7/8” arbor, Diamond concrete saw blade has a tough body with 1.4mm thickness..
  • 【Tile Saw Blade Wet & Dry】: This 7inch tile blade features a 10mm diamond rim, Super thin porcelain saw blade with free chips for cutting, Matched with hand-held machine with a 7/8" or 5/8" Arbor, It can be used on different types of angle grinders and tile cutters, Ideal for Wet and Dry cutting. Furthermore, it is easy to install and ready to use..
  • 【Turbo Rim Design 】: The wet saw blade has turbo rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. They have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
  • 【High Performance】: Diamond saw blades comes with X teeth offer fast and smooth cutting. High-Performance diamond matrix provides long life and enhanced material removal. this blade cuts through porcelain like butter. 1.4mm thickness can keep ....
Check Stock

Lackmond Beast Pro 7 Wet/Dry Porcelain Turbo Mesh Saw Blade - 7 Tile Cutting Tool with Quick Cooling Mesh Rim & 7/8 - 20mm - 5/8 Arbor - BPM7

  • TURBO MESH CONFIGURATION – The unique turbo mesh rim significantly aids in cooling the blade, resulting in longer blade life and extremely clean/....
  • ASSORTED TILE APPLICATIONS – Designed to be used on porcelain tile, ceramic tile, marble, granite and other natural stone.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious....
  • EQUIPMENT – For use on Tile saws, circular saws, and hand grinders.
  • WET OR DRY SAW BLADE – 4"-7” BLADES can be used wet or dry. 10” blade is for wet only.
Check Stock

GoYonder 7 Tile Saw Blade Wet for Angle Grinder, Super Thin Diamond Saw Blade Grinder Blades for Wet Dry Cutting, Diamond Blade for Cutting Ceramic, Porcelain, Tiles, Granite, Marbles (Blue, 7\)

  • 【Excellent Tile Blade】: The 7” tile saw blade is made of extended performance diamond matrix, which is fairly durable long lasting. Size:180 x 10 x 1.2 x 22.23mm, Thickness: 1.4mm, Outer Diameter: 180mm (7 inch), with 7/8" or 5/8" Arbor, Max speed 13200 RPM. 80m/s. Its great at cutting tile and stone without chipping the finished surface..
  • 【Precise and Clean Cuts】: Our 7” diamond saw blade has a strong core it’s slightly thicker than other blades to have a fine cut and almost no chip-out. Moreover, This little tile cutting blade has 1.4mm thickness runs smooth fast and quiet actually. they have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
  • 【Widely Application】: This diamond blade can be used to cut porcelain tile, Granite, Marble, sandstone quartz, brick, slate, cement backer board and other thin masonry blade with. Went through many materials easily like it was butter. It will be a perfect partner for tile installers and general homemade DIY..
  • 【X Teeth Rim Design】: The tile saw blade wet has X Teeth rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. Warm P....
Check Stock

Lackmond Beast Pro 4.5 Wet/Dry Porcelain Turbo Mesh Saw Blade - 4-1/2 Tile Cutting Tool with Quick Cooling Mesh Rim & 7/8 - 20mm - 5/8 Arbor - BPM4.5

  • TURBO MESH CONFIGURATION – The unique turbo mesh rim significantly aids in cooling the blade, resulting in longer blade life and extremely clean/....
  • ASSORTED TILE APPLICATIONS – Designed to be used on porcelain tile, ceramic tile, marble, granite and other natural stone.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious....
  • EQUIPMENT – For use on Tile saws, circular saws, and hand grinders.
  • WET OR DRY SAW BLADE – 4"-7” BLADES can be used wet or dry. 10” blade is for wet only.
Check Stock

Lackmond Beast Pro Hard Porcelain Turbo Saw Blade - 7 Hard Tile Cutting Tool with Narrow Slot Turbo Rim & 5/8 Arbor - BPT7

  • TURBO CONFIGURATION – For precise cuts in hard porcelain and ceramic tiles. The Turbo blades are engineered with a thin, narrow slot-turbo rim which....
  • ALL PURPOSE – Suitable for use on all types of ceramic and porcelain tiles.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious....
  • WET OR DRY SAW BLADE – 4”-7” blades for wet use only. 7”+ can be used both wet and dry.
Check Stock

DEWALT Wet Tile Saw, Corded, 1.5 Amp, 25” Rip Cuts, 28” Plunge Cuts, 45 Degree Angle Cuts, Includes Stand (D24000S)

  • Your purchase includes One Dewalt 10-Inch Wet Tile Saw, Wet Tile Saw Stand, 10-Inch XP4 Porcelain Tile Blade, Submersible Pump, Water Pan, Side Water Tray, Rear Water Tray, Cutting Cart Side Extension, Angle/Rip Guide, Blade Wrench & Hex Wrench.
  • Tool dimensions: 36” L x 29” W x 24” H. Tool weight: 69 lbs. Voltage – 120V. Peak Horsepower – 1.5 HP.
  • Other specifications: Arbor Size – 5/8”. Blade Diameter – 10". Diagonal Cut Capacity 18” x 18”. Max depth cut – 3 1/8”. Max Rip Capacity with Plunge – 28”. Bevel Capacity – 45ᵒ.
  • Cutline indicator and stainless steel rollers provide stable, accurate cutting to within 1/32 inch over 18 inch cuts.
  • Compact saw frame allows for easy transport and storage in vehicle.
Check Stock

Lackmond Beast Pro Hard Porcelain Turbo Saw Blade - 5 Hard Tile Cutting Tool with Narrow Slot Turbo Rim & 7/8 - 20mm - 5/8 Arbor - BPT5

  • TURBO CONFIGURATION – For precise cuts in hard porcelain and ceramic tiles. The Turbo blades are engineered with a thin, narrow slot-turbo rim which....
  • ALL PURPOSE – Suitable for use on all types of ceramic and porcelain tiles.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious....
  • WET OR DRY SAW BLADE – 4”-7” blades for wet use only. 7”+ can be used both wet and dry.
Check Stock

3pcs 4.5 Inch Diamond Saw Blade Tile Blade, SUNJOYCO Diamond Cutting Wheel for Angle Grinder, Dry Wet Smooth Cutting for Porcelain Tile Concrete Granite Ceramic Masonry, 4/5\-7/8\ Arbor

  • SPECIFICATION: Diameter: 4-1/2inch (115mm). Arbor: 7/8 inch and reducing ring 4/5 Inch. Thickness: 1.2mm ( 1/2 inch). Increase Segement:10mm (2/5 inch). Fit for most tile saws and hand-held angle grinders with a 7/8 inch to 4/5 Inch arbor..
  • UPGRADE DESIGN: This diamond saw blade is super thin and provides a precise, smooth, chip-free cutting experience for you. The X-teeth rim of the tile cutting tools can speed up the cutting speed. Thicker center to avoid vibrations and wobbling. 8 Cooling holes ensure longer service life. It can be dry-cut or wet-cut, and the cutting effect is better with water..
  • WIDE APPLICATIONS: This super thin tile blade is designed for cutting ceramic, porcelain tile, granite, marble, and vitrified tile, brick, sandstone. It can work as a porcelain tile blade, ceramic tile cutter, granite blade, and other thin masonry blades. It's an ideal diamond saw blade for tile installers, contractors, homemade DIYers, and tradesmen..
  • HIGH QUALITY: This diamond blade for tile is well made and has brilliant safety and durability. High-quality diamond material makes sure it lasts longer and causes less heat and very little wear when cutting. it also meets the demands of dry and wet cutting..
  • SATISFACTION GUARANTEE: We provide a two-year warran....
Check Stock

GoYonder Super Thin 4.5\ Grinder Blades Tile Blade, Diamond Saw Blade for Cutting Porcelain Tiles Granite, 115mm Tile Cutting Blade for Angle Grinder

  • 【Size & Material】: This tile blade is made of quality metal alloy with diamond grains, which is durable and high strength. Available in various sizes to choose, the size is: 115 x 10 x 1.2 x 22.23mm, Thickness: 1.2mm, Outer Diameter:115mm /4.5 inch, 7/8” arbor, Diamond concrete saw blade has a tough body with 1.22mm thickness..
  • 【Grinder Blades Wet & Dry】: This tile blade 4.5 features a 10mm diamond rim, Super thin porcelain saw blade with free chips for cutting, Matched with hand-held machine with a 7/8" or 5/8" Arbor, It can be used on different types of angle grinders and tile cutters, Ideal for Wet and Dry cutting. Furthermore, it is easy to install and ready to use..
  • 【Turbo Rim Design 】: The wet tile cutting blade has turbo rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. They have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
  • 【High Performance】: Diamond saw blades comes with X teeth offer fast and smooth cutting. High-Performance diamond matrix provides long life and enhanced material removal. this blade cuts through porcelain like butter. 1.2mm thickness....
Check Stock