Reviews D Shaped Washers

MuHize Black D-Ring Shackle Cover 2 Pcs Shackle Isolator and 4 Pcs Washer, Isolators Washers Kit Fits 3/4 inch Shackle Gear Design Rattling Protection (Pack of 2)

  • PACKAGE INCLUDED - MuHize 2Pcs black D-ring shackle isolators + 4 Pcs black washers kit. Perfect fit for standard 0.75" or 3/4" D-Rings or Shackles with 7/8" screw pin..
  • EASIEST DIY FOR BUMPER - The shackle isolators and washers are one of the DIY necessities of the off-road trail or everyday driving. The quality shackle isolators can both protect Wrangler or pickup bumper finishes from damage and make it look cool after DIY modification..
  • EASY TO INSTALL - No Screws or drilling are required. And the washers can reduce rattling noise when the vehicle is in motion..
  • DURABLE MATERIAL - MuHize isolator & washers are specific for durable rubber material, which can prevent shackles from crack, warp or corrode effectively..
  • HIGH QUALITY - Perfect bending can be matched with 3/4 inch D-ring shackle. Accurate design. It can be used as a buffer to effectively protect the bumper..
Check Stock

Steel Flat Washer,900pcs M3-M10 A3 Plain Washers Assortment Kit with Box for Distribute Load of Threaded Fastener

  • ✔【 Rational Design】- The washer is a thin disk-shaped plate with a hole in the middle that is normally used to distribute the load of a threaded fastener, such as a screw or nut..
  • ✔【Function 】- These washers can be used as a spacer, wear pad, pre-load indicating device, locking device, and to reduce vibration..
  • ✔【Meet Your Need 】- Each set includes many flat washers that can be used for a long time, flat washer is applied when the hole is a larger diameter than the fixing nut..
  • ✔【Usage 】- High-quality bolted joints require hardened steel washers to prevent the loss of pre-load after the torque is applied..
  • ✔【Characteristic 】- The washers are also important for preventing galvanic corrosion, particularly by insulating steel screws from aluminum surfaces..
Check Stock

General Motors 12643668, Engine Crankshaft Thrust Washer

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

redsun Flow-Thru Parts Washer Brush Parts Cleaning Brush 3.6 Ounce,10.62 Inch with 28 Inch Long Hose Connects to Parts Washer Nozzle White

  • HOLD COMFORTABLY:This parts washer brush can fit nicely in your hand, the plastic handle has a comfortable shape and texture.
  • CORROSION RESISTANT LONG HOSE:28-Inch long tube. Corrosion resistant, good for both petroleum or water - based solvents.
  • BULLET-SHAPED TIP:Bullet-shaped tip focuses the cleaning power for easy cleanup. Won't mushroom.
  • SUITABLE FOR MOST PARTS WASHERS: This brush ships as original equipment with most of the parts washers made in the world..
  • STURDY BRISTLES:The bristles are firm and do not fall off easily, able to clean car parts efficiently.
Check Stock

ISPINNER 325pcs Backup Rivet Washers Assortment Kit Stainless Steel Washers for Blind Pop Rivets Diameter 3/32 1/8 5/32 3/16 1/4

  • ✅【HIGH QUALITY】 These rivet washers are made of high quality 304 Stainless Steel, corrosion resistant, durable and steady, high quality materials and construction to ensure long service life..
  • ✅【SPECIAL DESIGN】Backup Rivet Washers are designed to be used with blind rivets, to provide additional support when tighening rivets in soft materials and other applications where it needs a larger diameter surface to prevent pulling out. They're perfect to deal with oversized or irregularly shaped holes..
  • ✅【WHAT YOU GET】This assortment kit has 5 different sizes for you to deal with different rivets. It includes 1/4"(25pcs), 3/16"(100pcs), 5/32"(50pcs), 1/8"(100pcs), 3/32"(50pcs), which almost contain the 5 most commonly used sizes in our lives. Comes with a convenient plastic case, which makes it easy to find correct washers quickly..
  • ✅【HOW TO USE】Choose the right size rivet washers according to your pop rivets diameter. For example, if your blind rivets size is 3/16" x 1/2", you can use a 3/16" washer. Slide the washer onto the blind rivets flange, insert the rivets into the pre-drilled holes and use rivet tools to get it fixed..
  • ✅【WIDE APPLICATION】These washers are suitable for indoor decoration, outdoor construction, electrica....
Check Stock

Clevite TW-678S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Clevite TW-473S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

RUNCL Baitcasting Fishing Reel REMIEL, Baitcaster - Seamless Magnetic Brake System, 7.5:1 Gear Ratio, 10+1 Stainless Steel Ball Bearings, Sealed Drag, Lengthen Handle (Red, Right)

  • ...trol, the RUNCL REMIEL baitcasting reel can work stable and smooth. Micro-adjustable magnetic system allows you to fine tune cast control to accommodate a variety of lures and fishing conditions, effectively reduce bird nests when casting into the wind.
  • Advanced Sealed Drag System: Loaded with 4 premium carbon fiber washers and 1 stainless steel arch-shaped washer. The arch-shaped washer increases contact area between carbon fiber washers and anti-reverse bearing, extends lifespan of carbon fiber washers, helps boost maximum drag by 20% (up to 17.6 lbs) and guarantees you a larger catch.
  • Enhanced Ergonomic Lengthen Handle: The enhanced lengthen handle (4in/10cm in length) helps save effort, promises unparalleled efficiency even when fighting with trophies, perfect for tournament anglers on a budget. The hollow out handle and non-slip high density EVA knob provide a superior grip, keeps your hands comfortable during a long fishing trip.
Check Stock

4 Sets 304 Stainless Steel Square U-Bolt Boat Trailer U-Bolts with Washers and Nuts L Heavy Duty U Bolts for Sailboat Trailer Automobiles Trailer Industrial Parts 1/2 D x 3 1/16 W x 4 5/16 Inch

  • Package includes: stainless steel u-bolt set include 4 pieces u-bolts, 8 pieces stainless steel flat washers, 8 pieces stainless steel nylon lock nuts, 8 pieces lock washers, all accessories are made of 304 stainless steel.
  • U-bolt size: 1/2 x 3-1/16 x 4-5/16 inch (D x W x L), thread length: 2-1/2 inches, suitable for 3 x 3 inch square beams and shafts.
  • Stainless steel material: u bolts for boat trailer are made of 304 stainless steel, strong and long-lasting.
  • These 304 stainless bolts prevent rust corrosion, acid corrosion and wear.
  • It's still perform well in rainy and humid seaside environment.
  • How to use: firstly choose the corresponding square U shaped bolt according to the size of the pipe, then drill holes in the connection, and finally lock nut and flat washer.
  • Use a hand wrench or socket ratchet when installing nuts.
  • Do not use an impact or a high speed socket driver.
  • Wide application: square u-bolt is applied to fix or connect the locked parts to rectangular wood and metal objects, such as cars, sailboat trailers, pipe, tube, plumbing and other industrial applications.
Check Stock

AUTMATCH Pack of 2 D Ring Shackle Isolators Washers Kit 2 Rubber Shackle Isolators and 8 Washers Fits 3/4 Shackle Prevents Rattling Protect Bumper Shackle Cover Black

  • Complete Suite: 2Pcs Red Shackle Isolators & 8 Pcs Thick & Thin Washers Kit Fit For 3/4 Inch D-Ring or Bow Shackle with 7/8 Inch Screw Pin and Protects The Bumper Finishes From Damage.
  • Durable Material: Durable Rubber Material And Which Make The Isolator & Washers Keep Away From Crack, Warp or Corrode, Withstand The Elements of The off-Road Trail or Everyday Driving.
  • Feature: The Isolator Protects the Shackle From Tapping Against A Bumper or Any Other Recovery Point and the Washers Reduce Rattling Noise When The Vehicle Is In Motion.
  • Usage: Snaps Into Place Facilitating Easy Installation or Removal From 3/4 Inch D Ring & Bow Shackles, No Screws or Drilling Are Needed.
  • Guaranteed: All of Our Products Are Backed By Our 100% Satisfaction Guarantee And Please Contact Us For Any Inquiry, We Are Here To Help.
Check Stock

uxcell AXK3552 Thrust Needle Roller Bearings with Washers 35mm Bore 52mm OD 2mm Width

  • [MODLE] - Bearing Model: AXK3552 (I.D.=35mm, O.D.=52mm, Thickness=2mm, Thickness with Washers: 4mm).
  • [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads.
  • Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise.
  • [FEATURES] - Needle Roller Thrust Bearings can accommodate axially loads in one direction only.
  • [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways.
  • [CAPABILITY] - 80.1kN Static Load Capacity, 16.9kN Dynamic Load Capacity, 5500RPM Maximum Rotational Speed.
Check Stock

uxcell AXK2035 Thrust Needle Roller Bearings with Washers 20mm Bore 35mm OD 2mm Width

  • [MODLE] - Bearing Model: AXK2035 (I.D.=20mm, O.D.=35mm, Thickness=2mm, Thickness with Washers: 4mm).
  • [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads.
  • Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise.
  • [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only.
  • [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways.
  • [CAPABILITY] - 45.6kN Static Load Capacity, 12.9kN Dynamic Load Capacity, 8500RPM Maximum Rotational Speed.
Check Stock

2 Sets AXK2035 Thrust Needle Roller Bearings with Washers 20mm Bore 35mm OD 2mm Width

  • Bearing Model: AXK2035 (I.D.=20mm, O.D.=35mm, Thickness=2mm).
  • Material: Chromium steel rollers for heat tolerance and durability under heavy loads.
  • Steel cage guides and evenly spaced rollers for reduced friction, vibration and noise.
  • Features: Needle Roller Thrust Bearings can accommodate axial loads in one direction only.Combined with 2 washers for applications where adjacent machine components cannot serve as raceways..
  • Capability:45.6kN Static Load Capacity, 12.9kN Dynamic Load Capacity, 8500RPM Maximum Rotational Speed.
  • Package contents:2 x bearing,4 x bearing washers..
Check Stock