Reviews Cylindrical Lever

Tell Manufacturing - KC2381EMP 32D 234 T SCC Heavy Duty Commercial Entry Knob with a Cylindrical Latch, C Keyway, Tested ANSI Grade 2, Certified UL 3 Hour Rating, Square T Strike, CL100008 and CL500008 Ball Knob KC2300

  • This KC2300 series cylindrical commercial door knob is tested to ANSI A156.2 Grade 2 is tested to last over 400,000 cycles. A cylindrical chassis allows the wear to be on the mechanical body and not the latch for a longer lasting lever..
  • This commercial heavy duty knob is best for heavy traffic areas and has a best in class 3 hour UL rating and can be used on fire doors.
  • This stainless steel keyed knob locks with a key on one side and is a C Keyway. By pushing in the lock button, the outside lever disengages until unlocked by key or the inside lever is turned. Typically used for garage doors, entry doors or bedroom doors, it can also be used on office doors, medical doors, security doors, apartment doors, and hotel doors.
  • Easy installation with a 2 3/4" backset that fits standard door prep. With a 6 pin C keyway there are 750,000 possible keying combinations..
Check Stock

E-Plex - E2031XSLL626 Kaba Electronic Keyless Lock, Kaba Cylinder (Schlage\C\ Keyway) Included, Satin Chrome Finish

  • Non-handed, works for Right Hand and Left Hand Doors.
  • Cylindrical Latch with 3-hour UL/ULC fire rating. Door Thickness - Cylindrical Model 1⅜ inch (35 mm) to 2½ inch (64 mm). pre-assembled to accommodate doors 1⅝ inch (41 mm) to 2 inch (50 mm).
  • Powered by 3 AA Batteries - provides up to 100, 000 cycles.
  • Lock is easily programmed via keypad or with optional Eplex Software.
  • Heavy Duty Commercial Grade 1 Lockset with ADA Lever.
Check Stock

Signature Hardware 948525 Ravenel 1.8 GPM Single Hole Bar Faucet

  • Sleek and stylish, the Ravenel single-hole bar faucet has a swiveling gooseneck and a modern design that catches the eye. Cylindrical detailing on the fixture's base and lever handle create a look that complements a contemporary space. Built to last, this fixture is made of solid brass and has a smooth, resilient finish..
  • Covered under Signature Hardware's limited lifetime warranty.
  • Deck mounted faucet installs directly to sink or countertop.
  • Single lever handle controls the flow and temperature of water.
  • This faucet meets or exceeds the following codes/standards SDWA Section 1417(d) WaterSense IAPMO/cUPC NSF 61 ASME A112.8.1 / CSA B125.1 ADA NSF/ANSI 372 and the California lead law titled Health and Safety Code Section 116875.
Check Stock

J.W. Winco 15MGP5 EN519.1 Plastic Cylindrical Handle

  • Hand knob: Techno polymer plastic (Polyamide), black matte finish.
  • Eliminates the need for a thread on the shaft.
  • These cylindrical handles are driven over a lever using a plastic mallet. The shaft end should be slightly rounded or chamfered (30°).
Check Stock

J.W. Winco 12MGP3 EN519.1 Plastic Cylindrical Handle

  • Hand knob: Techno polymer plastic (Polyamide), black matte finish.
  • Eliminates the need for a thread on the shaft.
  • These cylindrical handles are driven over a lever using a plastic mallet. The shaft end should be slightly rounded or chamfered (30°).
Check Stock

Weslock 00610EAEASL20 Eleganti Knob Antique Brass

  • Meets ANSI A 156.2 Grade II lock standards.
  • Removable knobs/levers prevents scratching during installation.
  • Panic proof privacy/keyed entry - one turn of interior knob/lever unlocks and opens door.
  • Limited lifetime mechanical & Limited lifetime finish warranty.
Check Stock

Weslock 00640IAIASL23 Impresa Knob Antique Brass

  • Meets ANSI A 156.2 Grade II lock standards.
  • Panic proof privacy/keyed entry - one turn of interior knob/lever unlocks and opens door.
  • Limited lifetime mechanical & Limited lifetime finish warranty.
Check Stock

Kaba Simplex LL1011-05-41 Lever Mechanical Pushbutton Lock Standard (Left Hand)

  • Cylindrical Lever Lock, Combination Entry Only, 2-3/4" Backset, 1/2" Throw Latch, Antique Brass.
Check Stock

Weslock 07140M1M1SL23 Durham Knob Oil-Rubbed Bronze

  • Meets ANSI A 156.2 Grade II lock standards.
  • Panic proof privacy/keyed entry - one turn of interior knob/lever unlocks and opens door.
  • Limited lifetime mechnical & Limited 10 year finish warrany.
Check Stock

Weslock 03710I1I1SL20 Impresa Knob Oil-Rubbed Bronze

  • Meets ANSI A 156.2 Grade II lock standards.
  • Removable knobs/levers prevents scratching during installation.
  • Panic proof privacy/keyed entry - one turn of interior knob/lever unlocks and opens door.
  • Limited lifetime mechanical & Limited lifetime finish warranty.
Check Stock

Aghora At the Left Hand of God

  • Electronic digital lock leverset is programmable through the keypad for 100 user entry codes for secure keyless entry.
  • Cylindrical lock mechanism has a fixed 6-pin key cylinder with SC1 keyway for key override.
  • Lever handle is reversible for right- or left-hand operation, does not come with an IC Core.
  • Stainless steel trim with satin chrome finish resists corrosion.Real-time automated lock/unlock schedules save manpower.Door Thickness: Fits 1 5/8" to....
Check Stock

LYNN HARDWARE Commercial Door Lever Lock - Heavy-Duty Locking Door Handle Designer Door Handles Cylindrical Lever Lock Non-Handed Grade 2 Door Handle Satin Chrome Privacy/Bathroom Function

  • ...ible design standards. It is also fire rated for up to 3 hours. Our commercial door locks meet the needs of home/business owners, apartment managers, contractors, maintenance facility managers, handymen, locksmiths, and property managers..
  • WHAT'S IN A BOX: Each box of LYNN HARDWARE lever door handle locks includes 1 cylindrical lockset, screws and bolts, user-friendly instructions, 1 ANSI strike, 1 reversible latch unit, and 2 pre-cut keys (Schlage C-Keyway (6 pin cylinder) that are re-keyable. The heavy-duty door closer features cold-rolled steel, machined and threaded hubs, and locking nuts to securely bolt the chassis to the door, thereby preventing loosening of the lockset even with hundreds of uses per day..
Check Stock

Fowler 52-585-005-0 Magnetic Base, 2\ x 2-11/32\ x 1-13/16\ Base Dimensions

  • Dial Indicator Holder: Accepts all AGD dial indicators and test indicators with 1/4" post mount.
  • can be used with milling machines, lathes, and more.
  • Magnetic Base: Its magnetic V-base can be placed on cylindrical, polished surfaces with no risk of marring.
  • Release Switch: Magnetic with 85 pounds of magnetic pull is supplied with an on and off lever which releases the magnet from the surface.
  • Dimensions: This flexible dial indicator holder measures 2" x 2.34" x 1.81.
Check Stock