Reviews Cylinder Valve Bonnet

RP22734 Replacement Bonnet Nut Compatible with Delta R10000 Shower Valve

  • Compatible with Delta R10000 series shower valve.
  • Good build quality and come with solid, clean threads.
  • Must use a wire brush to clean-up the threads on the valve body & wipe off any grit before install bonnet nut. If clean, nut should turn easily and snug up without excessive force.
  • Recommend to replace bonnet when replacing cartridge so that you can assure seals are properly seated/compressed in the valve body.
Check Stock

RP64851 Replacement Bonnet Nut Compatible with Delta R11000 Shower Diverter Valve

  • Compatible with Delta R11000 shower diverter valve.
  • Good build quality and come with solid, clean threads.
  • Must use a wire brush to clean-up the threads on the valve body & wipe off any grit before install bonnet nut. If clean, nut should turn easily and snug up without excessive force.
  • Recommend to replace bonnet when replacing cartridge so that you can assure seals are properly seated/compressed in the valve body.
Check Stock

Honeywell V5011N2089 1 2\ 2-Way F-NPT Globe Valve

  • Class 800 inline globe valve with non-rising stem and bolted bonnet for on/off actuation and flow control (throttling) in a pipeline.
  • Carbon steel valve body for tensile strength and hardness.
  • Bolted bonnet for tight assembly and reduced risk of leakage.
  • Socket-weld ends for welding to unthreaded pipes.
  • Maximum working pressure of 200 pounds per square inch (psi).
Check Stock

JQSKUNP Spiked Valve Cover Chrome Spikes Bolt M6X1.0 Engine Bay Dress Up Washer Kit for Honda Civic Integra RSX Engine H23A1 …

  • 【Applicable Models】Chrome valve cover bars fit for and SBC 283 305 327 350 383 400 engine, you can buy with confidence..
  • 【Applicable Generator】Valve hold-down tabs fit for all engines using 1/4-20 threaded bolts, not for bridge frames, and also fit for FE engines using 5/16-18 threaded bolts..
  • 【Load Distribution】Valve cover spreader bars help distribute the load on the bonnet bolts to better seal the bonnet gasket..
  • 【Stable Performance】Chrome 4 3/4in valve cover bars can press down the struts, with stable performance and long service life..
  • 【After-sales Service】Our store provides you with 100% new and high-quality valve spreader bars. If you have any questions, please tell us in time, we will solve it in the first time..
Check Stock

Tuimiyisou Scuba Diving Tank Valve 250BAR Underwater Gas Cylinder Valve for Underwater Sports Activities Surf&Diving-Swimming&Diving Gloves

  • The Diving Cylinder Valve has a special design which allows for easy and comfortable cylinder handling.
  • Our Tank Valve is made of chrome-plated brasswhich is durable for long term use and it can provide a longer service life and a lower replacement frequency.
  • This Underwater Cylinder Valve will let you know more about the fun of diving and you will have more interest in it.
  • This Diving Tank Valve is engineered with high flow characteristics to maximize regulator performance.
  • The Cylinder Valve has positive hand wheel grip for easy identification of on/off direction.
Check Stock

New 60 cu ft Aluminum Argon Cylinder with CGA580 Valve

  • New, high-quality 20 cf steel helium cylinder with CGA580 valve.
  • 5.24" diameter and 14.76" height (Cylinder).
  • Heavy-duty brass constructed helium balloon inflation valve.
  • Inflation valve complete with regulator and gauge.
  • All cylinder ship empty. Please consult your local compressed gas supplier for filling needs..
Check Stock

GOOFIT Completed Cylinder Head Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Pit Quad Go Kart Dirt Bike

  • intake valve mounting hole distance:45mm/1.77".
  • Exhaust valve mounting hole distance:45mm/1.77".
  • Spark plug:A7TC(Please Be Carefully Check The Goods Appearance,Size,Shape Before Ordering)..
  • Completed Cylinder Head Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Pit Quad Go Kart Dirt Bike.Not Replacement for 125cc Cylinder Head with 23mm and 28mm Intake and Exhaust valves.
  • 52.4mm LIFAN 110CC 125cc Cylinder Engine.
  • Cylinders are used to hold gasoline and air,Where the mixture burns,Expands dramatically,And pushes the piston,Which transmits this force to the crankshaft..
  • High quality cylinder replacement part.High toughness,Corrosion resistance,Rustproof and durable.Has a good heat dissipation structure design,Providing reliable performance and long life service..
  • Warranty:We are always available to help our customers.If you are not satisfied with the order,please leave us a message.Wish you have a happy shopping experience,we are committed to providing the best service..
Check Stock

Johnson Controls VG7882ET Series VG7000 Bronze Globe Valve, Three-Way Mixing, Brass Trim, Union Sweat End Connection, 1/2\ Valve Size, 1.8 Cv

  • Elbow globe valve with rising stem and threaded bonnet for on/off actuation and flow control (throttling) in a pipeline.
  • Bronze valve body and disc for strength and corrosion resistance.
  • Pounds per square inch (gauge) (psig) rating of 200 for water, oil, and gas (WOG) and 125 psig for steam working pressure (SWP).
  • Threaded bonnet for reduced risk of leakage.
  • Female National Pipe Taper (NPT) threads on both ends for connecting to male threaded pipes.
Check Stock

AKWH 15810-RKB-J01 VTEC Solenoid Spool Valve with Gasket Replacement for Hon-da Ody-ssey V6 3.5L 2005-2007 Pilot FWD Acc-ord V6 3.0L 2006-2008 15810RKBJ01

  • ...ol Valve OEM Part Number: 15810-RKB-J01 15810RKBJ01. Replacement for 2005-2007 Acc-ord Hybrid, 2005-2007 Ody-ssey EX / EXL / EXL-T, 2006-2008 Pil-ot 2WD MODELS ONLY OF TRIMS: LX / LXVP / EX / EXL / EX-SE P/N 15810-RKB-J01.
  • VTEC Solenoid Spool Valve Replacement for: 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head..
  • VTEC Solenoid Spool Valve Replacement for: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head..
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multi....
Check Stock

10 CF Acetylene MC and 20 CF Oxygen Cylinder Set

  • 10 cu ft Steel Acetylene Cylinder Size MC CGA520 Valve Installed.
  • 20 cu ft Steel Oxygen Cylinder CGA200 Valve Installed.
  • Professional Safety and Performance Features.
  • All cylinder ship empty. Please consult your local compressed gas supplier for filling needs..
Check Stock

XMT-MOTO Scooter GY6 50CC To 80CC Big Bore Cylinder For VIP Roketa Taotao Baja Silver

  • 【Cylinder Bore】: 47mm / Non-EGR Cylinder.
  • 【Apply to】: GY6 4 stroke 49cc 50cc 60cc 80cc engine upgrade for most of chinese scooter, atv and go karts.
  • 【Parts included】:GY6 80cc Cylinder Head with 64mm valve, 47mm Bore Cylinder Block, Set of 47mm Piston Assy, Piston, Rings and Wrist Pin, Full Set of Engine Gasket, 6pins CDI, Ignition coil, 4pin AC regulator, relay, A7TC Spark Plug, Set of Intake Manifold and Muffler Bolts, and Exhaust locking ha, Set of 8.5 Gram roller , Rocker Arms, Valve Seals, Oil Pump Assy with Driving Gear, Camshaft, Camshaft chain 82, belt 699*18*30, Chain adjuster, Oil screen, spring, cover and oil seal, Starter clutch.
  • 【Fit to】Roketa, Sunl, Baja, Taotao, Panterra, Redcat Tank Giovanni Wildfire Xtreme Seaseng Qlink Yiben Jonway Jmstar, Vento.
Check Stock

Premium Double Gauge CO2 Regulator - Polycarbonate Bonnet

  • Commercial Dual Gauge Design with A 60 Psi and 2000 Psi Gauge Low Pressure Gauge..
  • Primary Keg Beer Regulator 5/16 barb Shutoff with Check Valve Ball Check Valve..
  • Gray Plastic Bonnet for Easy Pressure Adjustment..
  • Co2 Keg Brass Beer Double Gauge Regulator..
Check Stock

Taprite T-742 Double Gauge Co2 Kegerator Regulator

  • Commercial Dual Gauge Primary Keg Beer Regulator.
  • CO2, 60# & 2000# Gauge, 5/16b Shutoff (W/Ck Valve) Plastic Bonnet for Easy Pressure Adjustment Ball Check Valve.
  • High Pressure Gauge (Side) Indicates Co2 Tank Pressure Remaining (0-2000 psi).
  • Low Pressure Gauge (Top) Indicates Output Pressure to Keg (0-60 psi).
Check Stock