Reviews Cylinder Heads For Ford 2

Moroso 68475 Fabricated Aluminum Valve Covers, Fits Small Block Ford 289/302/351W Engines

  • Notched at each mounting location with socket-sized clearances for quick removal and installation.
  • Fits Ford 302/351W stock and aftermarket cylinder heads.
Check Stock

Sunex 2696 1/2-Inch Drive SAE 12-Point Driveline Socket Set, 7 Piece

  • Includes driveline sockets for Chevrolet, Chrysler, Dodge, Ford, GMC and Jeep models.
  • Remove and install driveline bolts, torque converters, cylinder heads, and 4x4 transmission casings.
  • SAE - inches: 5/16, 3/8, 7/16, 1/2, 9/16, 11/16, 3/4.
Check Stock

Head Stud Replacement Kit for 7.3L 1993-2002 Ford Power Stroke Diesel CP879

  • ...mpatibilities above to ensure accurate fitment..
  • ULTRA STRENGTH - XOTIC 7200 material properties allow for far greater tensile strength compared to 8740 chromoly steel head studs. Rated at 220,000 psi tensile strength. Threads rolled after heat treatment for optimum fatigue strength. Ample clamping strength prevents cylinder heads from lifting..
  • EASY INSTALLATION - Broached stud ends install & make cylinder head removal easier. Installation manual is included with drawn diagrams to ease the installation process. Head studs are designed to retain cylinder seal even with today's extreme high pressure turbo systems. These studs far exceed clamping forces provided by standard head bolts..
  • KIT INCLUDES - 36x Heads Studs, 36x Nuts, 36x Hardened Parallel Washer, 1x Fastener Assembly Lubricant & Instructions Manual. Black oxide finish protects from wear and tear. Hardened parallel washers allow for uniform load distribution and accurate torque readings..
  • WORRY-FREE PURCHASE - Xotic Performance is dedicated to offering LIFETIME WARRANTY and full money back guarantee if you aren’t satisfied. Rigorous quality inspections are undertaken to ensure premium product standards..
Check Stock

Distributor Cap Rotor and Spark Plug Wires Set - Ignition Tune-Up Kit - Compatible with 1984-1996 Ford F-150 4.9L 6-Cylinder

  • Compatible with or fits: (Note: Tall Cap) 1984 - 1986, 1996 Ford F-150 4.9L 6-Cylinder.
  • Compatible with or fits: 1995 Ford F-150 Special 4.9L 6-Cylinder.
  • Compatible with or fits: 1995 Ford F-150 Eddie Bauer 4.9L 6-Cylinder.
  • Compatible with or fits: 1993 - 1995 Ford F-150 XL 4.9L 6-Cylinder.
  • Compatible with or fits: 1993 - 1995 Ford F-150 XLT 4.9L 6-Cylinder | 1987 - 1992, 1996 Ford F-150 4.9L 6-Cylinder.
Check Stock

Mophorn Complete Cylinder Head for 85-95 22R 22RE 22RE 2.4L SOHC Pickup 4Runner Speed

  • Perfectly Suited: This cylinder head perfectly fits the 1985-1995 Toyota 4Runner 2.4L SOHC 8v 4Cyl, 1985 Toyota Celica 2.4L SOHC 8v 4Cyl, 1985-1995 Toyota Pickup 2.4L SOHC 8v 4Cyl, Volkswagen 2005-2010 Jetta, 2012-2014 Beetle, 2006-2009 Rabbit..
  • Robust Iron Structure: Built from industrial-grade cast iron, our cylinder head is tolerant to the extreme pressure generated inside cylinders and resistant to high temperatures and abrasion. Give up disappointing cylinders, and we got what you are looking for..
  • Highly Stable ＆ More Efficient: These are nothing like those ordinary cylinder heads that bring you dissatisfaction. Ours features fantastic performance. Add this cylinder head to your engine, and drive at lower noise with a higher power transfer efficiency..
  • Fully assembled ＆ Tested: All our cylinder heads have been fully assembled, carefully packed, and are waiting to get into your hands. Replace your cylinder heads and start to experience the smooth ride you have been missing out on..
  • Widely Used: As a quality cylinder head, this has been used on lots of Toyota 2.4L SOHC 22R 22RE 22REC engines. Replace your old malfunctioning cylinder head with our newly improved one, and you will feel your engine running smoothly like never before..
Check Stock

N351 Pushrod Guide Plates, Fits Ford, 5/16 Inch

  • Guide plates are specifically designed to work with the Small Block Ford V8 engine.
  • Made from durable steel with a natural finish.
  • Will work on 351N cylinder heads with the 5/16" push rods.
  • Comes in a set 8 eight to do the entire engine.
Check Stock

JEGS Non-Adjustable Rocker Arm Assembly | Fits Ford FE Engines | All-New & Ready To Bolt Down | Includes One Pair Of Rocker Arm Assemblies

  • BRAND NEW AND READY TO BOLT DOWN O.E. replacement unit.
  • FITS Ford FE engines including 352, 360, 390, 410, 427, 428 and others based on the same platform.
  • INCLUDES one pair of rocker arm assemblies to service two cylinder heads.
  • MUST HAVE FOR stock rebuilds or servicing heads.
Check Stock

E-cowlboy Crankshaft Positioning Tool for Ford 1993-newer 4.2L 4.6L 5.4L 6.8L Engines Crankshaft Holding Tool Timing Chain Installation Replace for Rotunda 303-448, T93P-6303-A, 6024 & 525219

  • ...Rotunda 303-448, T93P-6303-A, 6024 & 525219. Each part is manufactured to OEM specifications and testing..
  • Perfect Design — These engines are not Free Wheel engines, please Do Not rotate the crankshaft and/or camshaft when removing the timing chain and installing the cylinder heads. If it has "Jumped Timing", it will cause damage to the Valves and/or Pistons, requiring removal of the cylinder heads..
  • Easier Work — Must have tool for timing chain installation and adjustment! Easily install this tool over crankshaft and engine front cover alignment dowel. Align the crankshaft Woodruff key with the keyway on tool. It will position the crankshaft at top-dead-center (TDC) to correct the timing chain installation..
  • Superior Quality — Premium grade CNC machined heavy duty solid steel with black powder coated, strength and durability, anti-corrosion and anti-rust, anti-impact and anti-deformation. High precision and hardness to provide a much longer service life..
  • 100% Satisfaction Guarantee — If you're not 100% satisfied with our tools, simply return it for a fu....
Check Stock

Actron CP7818 Fuel Pressure Tester Kit,Black

  • Actron's Fuel Pressure Tester Kit works on most domestic fuel injected vehicles having a Schrader valve test port on the fuel rail.
  • Use on the following: Ford high pressure central fuel injection and GM, Ford, and Chrysler multi-port fuel injection - multi-port means one fuel injector per cylinder.
  • Tests: fuel pump check valves (leak down test), fuel pressure regulators, weak fuel pumps, fuel line integrity (clogged or damaged fuel filters), leaking injectors.
  • Kit includes: large easy-to-read 2-1/2 inch gauge with standard (0-100 psi) and metric (0-700kPa) scales, Ford fuel line adapter, solid brass fittings, & pressure relief valve for safe, clean testing.
Check Stock

Goblin Stud Online Slots Usa - Free Casino Slots Games

  • Fits Ford Tractor Models: 2000 3 cylinder, 2000 4 cylinder, 2031, 2100, 2110, 2111, 2120, 2121.
  • Fits Ford Industrial Models: 2030, 2130, 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340.
  • Fits Case IH Models: 574, 3220, 3230, 385, 395, 4210, 4230, 4240, 454, 474, 484, 485, 495, 584.
  • Replaces Part Numbers: 313022, 81816580, 87780773, C5NN1107F.
Check Stock

WEIGUZC Brake Booster Push Rod Adjustment Tool, Master Cylinder Push Rod Length Gauge for Adjustable Braking Distance of Brake Pedal, Suit for Most Brake Boosters with Adjustable Pins

  • 【 PROFESSIONAL REPAIR TOOL 】 The master cylinder push rod length gauge is designed to measure the depth of the master cylinder piston bore in order to adjust the length of the booster push rod pin, helping you to solve your car's braking difficulties and obtain precise and safe braking..
  • 【 EASY TO USE 】 The two ends of the booster push rod pin adjustment tool are designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use, making your measurement and maintenance process easier..
  • 【 QUALITY MATERIALS 】 The main body of the brake adjustment tool is made of high-quality aluminum alloy with anodized surface and the middle push rod is made of 304 stainless steel, durable and damage-resistant, will not rust and deform for ensuring your stable and reliable use..
  • 【 HOW TO USE 】 You can refer to the instructions in the picture or included in the package, and you can also search for 'master cylinder pin adjustment tool' on YouTube to get the installation video..
Check Stock

Door Lock Cylinder with Keys Replacement for 1995-2006 Ford Ranger Explorer F250 F350 E150 E250 E350 E450 E550 Econoline Bronco Mazda Mercury Truck Left Right Side Door Lock Cylinder Set DL140T

  • REPLACeMENT DOOR LOCK CYLINDER & KEYS KIT - Restore the ease and convenience of locking or unlocking any one of your Ford Mercury Mazda Truck / SUV's driver or passenger side door and return the door lock to proper operation. All door locks are perfectly matched to the original for precision installation. Ordered these DL-140T Door Lock Kit from Yinlowa, install them with ease, and don't have to deal with taking lock cylinders to a locksmith..
  • FITMENTS - Does Not Fit Models With Smart Key or Transponder Key.
  • Lock Is Mounted On the Door (Does NOT Fit Models With Lock In Door Handle Assembly).
  • Fits 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Ford Aerostar Bronco E150 Econoline Club Wagon E250 Econoline E350 Econoline Club Wagon E350 Super Duty E450 Econoline Super Duty E550 Econoline Super Duty Explorer Sport Trac F Super Duty F250 F350 F700 F800 Ranger Mercury Mountaineer. Please Check the Fitment before ordering!.
  • REPLACE PART # - XL2Z7821990AC, F87Z7821990BA, DL140T, DL111, Replacement for APDTY 140060 | These locks are identical. It doesn't matter what side you put them on. They are simple one-up (unlock) one-down (lock) with a neutral in ....
Check Stock

NewYall HVAC Heater Control Valve

  • For Ford Pick Ups (F Series) 1965-1969 All Without Factory Air.
  • 1968-1972 All With Air Conditioning, (Except 6 Cylinder).
  • For Ford Econoline Vans 1963-1972 Equipped With This Style Valve.
Check Stock