Reviews Cylinder Header

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Yonaka 4-1 Polished Stainless Steel Header Compatible/Replacement for Honda Acura B-Series

  • STAINLESS STEEL CONSTRUCTION - Made of high quality T-304 stainless steel material, which features with strength, rigidity and durability, preventing....
  • SHORTY HEADER DESIGN - 4-1 shorty header design increases high flow air. The bent shape is helpful to the unrestricted flow along the entire flow....
  • HIGH PERFORMANCE - It provides each cylinder with its own mini exhaust pipe, which means exhaust headers prevent interference among cylinders. More....
  • EASY INSTALLATION - Direct bolt-on installation , no more modification needs but hardware such as gaskets and bolts are necessary. 1 X pair of exhaust....
  • FITMENT - Headers may need to be clearanced if using the stock steering shaft, not compatible with factory AC components Compatible with 91-04 GMC....
Check Stock

Moroso WIRE SET,ULTRA 40 PERF SBC,RED 73685

  • Ultra 40 Custom Fit Wire Sets Red Wire, Unsleeved, SBC, Under Header/Non-HEI.
  • Cost-effective version of our race proven Ultra 40 Race Wire, without heat sleeving.
  • 7mm or 8. 65mm diameter wire with 40 ohms of resistance per foot.
  • Complete, ready-to-install sets available for specific engines.
Check Stock

8MILELAKE 14pc Radiator Pump Pressure Leak Tester Kit Vacuum Pressure Cooling System Tester

  • 8MILELAKE Tester helps detect internal and external leaks Perfect for head gasket failure detection (which side of block or which cylinder leaks). 8MILELAKE never authorized other sellers to sell except freebird trading..
  • Thumb-operated relief valve for quick and easy pressure release and self-locking quick-disconnecting components..
  • Locate system leaks from: Head gasket. Header tank. Radiator and heater cores. Water pump plugs, hoses and housings..
  • Quick-release couplings and a high-powered pump with large, easy-to-read dial are featured in this kit and the kit is packed in a large blow molded case which is supplied with operating instructions..
  • cooling system pressure testing kit with an updated selection of adaptors to fit popular European and Japanese vehicles including Alfa, Audi, BMW, Benz, Chrysler, Citroen, Ford, Honda, Mazda, Mercedes, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Suzuki, Toyota, Volvo, VW. Also includes non-specific adaptors for other makes and models. Comes with 8MILELAKE brand on the case..
Check Stock

9Pin USB Header Splitter Male 1 to 4 Female Extension Cable Card for Motherboard USB 2.0 Splitter Cable Connector with 3M Adhesive Adapter Port Multiplier for CPU Fans RGB Lights WiFi Receiver

  • [Male 1 to 4 Female USB Header Splitter ] 9pin USB header provides your motherboard with more 4 USB header for use with most USB peripherals, like....
  • [Easy Setup] This USB 2.0 Splitter cable connector with 3M adhesive, the internal hub can be conveniently attached to case of your motherboard to....
  • [Safe and Reliable] USB 2.0 header hub with wire belt shielding, Can Prevent short circuit outlet design. Motherboard USB splitter can prevent....
  • [Port Multiplier Version] 1 male to 4 female, connector A: 9Pin USB header male, connector B: 4x 9pin USB header female, work without any driver..
  • [Package Details] 1x USB Header Male 1 to 4 and hub connecting, 1x 30cm 9 pin USB header cable..
Check Stock

MEIRIYFA USB Header Extension Cable, USB 2.0 9-Pin Male to 9-Pin Female Internal Motherboard Header Cable for USB Ports, Expansion Cards and Motherboard Ports 20.3 inches（2 Pack)

  • 【Applicability】: USB 2.0 9-pin male to 9-pin female internal motherboard header cable, jumper to reduce and eliminate stress on rear USB expansion board or front panel USB ports as well as expansion card and motherboard port connections..
  • 【Extendibility】: The USB 2.0 header extension cable extends your 9-pin USB IDC motherboard header cable length by 20.3inch/515mm, which is more convenient and efficient..
  • 【How to use】: Connect the motherboard USB 9-pin header port to the 9-pin front panel of the PC case. USB enclosure to motherboard header cable, USB internal header cable, USB header cable..
  • 【Safety】: The 9-pin USB 2.0 header protects against short circuit socket design, which can prevent the risk of accidental removal of the circuit board, pins and case short circuit..
  • 【Material】: The 9-pin jumper has a flexible PVC sheath, which is flexible and environmentally friendly, which greatly improves its durability and life..
Check Stock

Bestop 5123801 No-Drill Header Windshield Channel for 1997-2006 Wrangler TJ

  • Durable shaped steel construction more tools. For Header Bikinis, these channels fit part numbers 52525, 52528, 52531, 52532 and 52544.
  • Uses factory windshield header latch points.
  • latch bolts included. It fastens into factory header latch holes and the Bikini top fits into the windshield channel.
  • Required to mount Header Channel style Bikini Top.
Check Stock

LIBERRWAY Exhaust Wrap Header Wrap Exhaust Heat Wrap for Exhaust Pipes Tap Kit for Car Motorcycle 2 Rolls of 2 x50ft with 20 Stainless Ties and Gloves

  • Premium Quality Exhaust Heat Wrap: LIBERRWAY exhaust wrap is made from pulverized lava rock. The header wrap reduces heat under hood up to 50% and....
  • Effective Exhaust Header Wrap: Withstands 1400℉ direct heat and 2000℉ intermittent heat. Stronger and more durable for improved thermal....
  • Functional Header Wrap: Extremely pliable for a tight and secure wrap. Improves horsepower performance and can be used on car exhaust header wrap,....
  • Easy to Install: Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching.....
  • What You Get: 2 rolls of 2 in (width) x 50 ft (length) x 1/16 in (thickness) header exhaust wrap, 20 pcs 0.3 in (width) x 11.8 ft (length) 304....
Check Stock

CY USB 3.1 Front Panel Socket to USB 3.0 20Pin Header Male Extension Adapter for Motherboard

  • Connector1: USB 3.0 Front Panel Socket / Connector2: USB 3.1 Front Panel Header.
  • The adapter is a converter to convert the available USB 3.0 header of a motherboard into a USB 3.1 header. Thus the USB 3.1 port of a housing can also....
  • Even the most up-to-date motherboards with AMD AM4 or Intel 2066 sockets are not always equipped with a USB 3.1 header. The adapter is the perfect....
  • The small converter is plugged into a USB 3.0 header that provides two USB 3.0 lanes. Thus, two data lines with 5 Gbps each are available, which are....
  • The converter thus provides a full-fledged USB 3.1 port..
Check Stock

New Winderosa Exhaust Valve Gasket Kit for Arctic Cat 600 Cross Country Racer 2014, 600 Sno Pro Factory Racer 2010 2011 2014, 600 Sno Pro Racer 2008, 600 Sno Pro/CC 2009 2010 2011 2012 2013

  • ...005 - 2006. Arctic Cat XF 800 EFI LXR/Sno-Pro/HC 2012 - 2013. Arctic Cat XF 8000 EFI All Models 2014 - 2016.
  • Two stroke kit includes O-rings, springs, washer, and gasket. Where applicable..
  • KTM four stroke kits include header gasket and replacement springs..
  • Four stroke kits contains header gasket..
  • Kits for multi cylinder vehicles contain multiple gaskets..
Check Stock