Reviews Cylinder Head Repair Kit

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

  • EASY TO USE: Rotate the crankshaft to make sure no ports/valves are open, use the tap to install new threads, choose the proper depth of insert, and screw it firmly into the newly tapped head.
  • Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
  • PERFECT SIZE: 14mm reamer with 12 points.
  • Use with 3/8-inch drive ratchet or wrench.
  • Inserts sizes are 3/8-Inch, 7/16-Inch, 1/2-Inch, and 3/4-Inch.
  • Tap is tapered to allow the tip to fit and rethread the hole in order for the coil to fit.
  • Measure your plug diameter, thread, and pitch to see if this kit is compatible.
  • PACKAGE CONTENTS: Rethread kit includes a tapping reamer and 4 different depths of inserts for your convenience.
Check Stock

KSIDUT Windshield Repair Kit, 4 PCS Windshield Crack Repair Kit,Nano Windshield Chip Repair kit,Glass Repair Kit Windshield Quick Fix for Chips, Cracks, Star-Shaped Crack

  • ...less than 12 inches and round damage no more than one inch in diameter..
  • 【Equipped With Instruction, Easy To Operate】A detailed instruction manual is included with the windshield repair kit. Just fix the repair bracket on the damaged part, pour in the repair liquid, push the liquid into the crack with a pressure cylinder, wait patiently for 10-20 minutes, and gently scrape off the excess solid with a blade after curing to complete the repair..
  • 【Light Weight And Portable】Our windshield chip repair kit is small in size, light in weight and easy to portability.Windshield repair kit comes in a small box for easy storage.When the equipped four bottles of glass repair fluid are not used up, they can be stored in the box and not easily lost..
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with GM Trucks & SUV's（1999 & Newer ）With a 4.8, 5.3, 6.0 or 6.2 L

  • No need to remove broken bolts, The exhaust manifold bolt repair kit will repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts.
  • Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts.
  • Exhaust manifold repair kit compatible with Trucks & SUV's (1999 & Newer) With a 4.8, 5.3, 6.0 or 6.2 L.engine size..
  • Material: Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud repair kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

OEMTOOLS 25649 14mm Cylinder Head Rethreaded Kit | Mechanic’s Tool for Rethreading Cylinder Heads | Includes Combination Tap/Reamer & 3/8 7/16 1/2 & 3/4 Inserts | Rethread Aluminum Heads Only

  • EASY REPAIR: Next time you have to repair a spark plug, just reach for this easy thread repair tool kit. You won’t need anything else for your repair, and anyone can use it. Keep in mind, this product is meant only for use with aluminum heads.
  • QUALITY MATERIALS: Our spark plug thread repair kit is built to last with its steel parts.
  • VARIOUS INSERTS: This kit comes with everything you need to repair spark plugs in your machine. The sizes include the following: 3/8”, 7/16”, 1/2”, and 3/4” inserts, as well as a combination tap/reamer.
  • BACKING: Our OEMTOOLS 14mm Cylinder Head Rethreaded Kit is backed up with our OEMTOOMS Limited One Year , so if anything happens to your product, you don’t have to worry about it.
  • EASY TO STORE: This thread repair kit is the perfect size to store in one of your shop drawers, or it could even go in a drawer in your own home.
Check Stock

CDHPOWER Super Motor PK80 Replaement with Iron Sleeve Cylinder 49mm Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • CDHPOWER Super pk80 motor Replaement:Iron Sleeve Cylinder 49mm:Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc pk80 motor kit.
  • High hole Piston kit installed well inside of cylinder and Long connecting rod AF80 or zmn80.
  • The casting cylinder head increases the horse power and this greatly cools off the engine. Would result better performance and longer life for your 2 Stroke Bicycle Engine. Casting cylinder head Height Max:51mm-52mm.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

Acouto Cylinder Head Stud Kit,Chromoly Steel Head Stud Kit Replacement for Alum Or Iron Heads Fit for SBC Series Engines #1525‑Stud/279.1001

  • 【Perfect fitment】This listing is for sbc head stud kit. We have used this kit on all of our for sbc engine buildups, and the fitment is perfect. Precisely machined nuts with strict quality control standards.They are heat‑treated prior to thread rolling and machining and are rated at a whopping 190,000 psi..
  • 【Wear resistance】Cylinder head fasteners are made from aircraft quality 8740 high tensile strength chromoly steel and cold‑forged to ensure molecular integrity, anti‑rust, wear resistance and lightweight..
  • 【More consistent cylinder head torque loading】The best reason for using head studs versus conventional head bolts is that cylinder head studs simply provide better and more consistent cylinder head torque loading..
  • 【Special technology】Cylinder Head Stud Kit,Centerless ground and heat treated before thread rolling, are designed to maximize reliability and strength..
  • 【Note】As a reliable seller, we aim to provide 100% products and services, and hope you have a pleasant shopping experience in our store..
Check Stock

Ambienceo 26” 28” Black 2 Stroke 50cc 80cc Cycle Bicycle Gas Motorized Gasoline Engine Motor Kit CDI Air Cooling For Mountain and Road Bike 80cc Silver

  • CDHPOWER LD90 Cylinder Body w/Piston Kit.
  • Compatible with bottom end of all brand 2 stroke gas motor kit 66cc/80cc/pk80/LD80/LD90 including other....
  • New pk80 upgraded cylinder with piston kit, the piston kit is installed well inside of cylinder already.Excluding cylinder head..
  • Cylinder head gasket and cylinder body gasket are included.
  • The LD90 Cylinder Body and piston kit can be replacement of most 2-stroke gas motor engine such as pk80/LD80/LD90.
  • piston pin:10mmx39mm.This is a high hole piston for a 40mm stroke but with 48mm bore..
Check Stock

ZFLXH For Hydroboost Repair Kit Chevy GMC Ford GM Dodge Seal Kit Hydro-Boost Leak 3 Piece

  • 【Product applicability】 the kit is suitable for most hydroboost devices Ford Chevy GM Dodge Ram.
  • 【Product usage】 hydro-boost seal repair kit - solve the leakage problem between hydroboost and master cylinder for repairing Bendix hydro boost kit 2771004 and many other hydro boost devices.
  • 【You will get】 3-piece hydro boost repair kit, seal leakage repair universal kit, which is compatible with Chevrolet, GMC, dodge and Ford hydro boost 3-piece universal seal leakage repair kit.
  • 【Simple installation】the hydroboost leak repair kit comes with a complete hydroboost reconstruction kit, which is simple to install and easy to use. Professional manufacturing, high precision, economical and practical. The complete hydroboost repair kit is attached, which is easy to use.
  • 【Note】This is a 3-piece repair kit, excluding metal star washers and other metal washers for replacement.
Check Stock

MOOSUN Cylinder Piston Gasket Top End Kit Fits 1988-2006 Yamaha Blaster 200 YFS200

  • 【BLASTER 200 CYLINDER TOP END KIT】Compatible with 1988-2006 Yamaha Blaster 200 YFS 200.
  • 【SPECIAL FUNCTION】MOOSUN Blaster 200 Cylinder replacement piston sets engineered from premium materials to provide exceptional service life and....
  • 【BLASTER 200 CYLINDER HEAD PISTON FEATURE】Cylinder piston set is the heart of engine. MOOSUN Cylinder has been factory honed and deburred to help....
  • 【PART NUMBER】2XJ-11111-00-00, 2XJ-11311-02-00,2XJ-11181-00-00, 2XJ-11631-01-97, 3JM-11351-02-00, 3JM-13621-00-00, B8E-S0000-00-00,....
  • 【CYLINDER PISTON RING GASKET KIT COMES WITH】1 x Cylinder, 1 x Piston, 1 x Piston Rings, 1 x Wristpin, 2 x Circlips, 1 x Needle Bearing, 1 x Head....
Check Stock

Cylinder Top End Rebuild Kit for 1988-2006 Blaster 200 YFS 200 Engine Piston Gasket Kit

  • 【Blaster 200 Cylinder Top End Kit】Fit for 1988-2006 Yamaha Blaster 200 YFS 200.
  • 【Function】Blaster 200 Cylinder replacement piston sets engineered from premium materials to provide exceptional service life and reliability.....
  • 【Blaster 200 Cylinder Head Piston Feature】Cylinder piston set is the heart of engine. OBUYTO Cylinder has been factory honed and deburred to help....
  • 【Part Number】2XJ-11111-00-00, 2XJ-11311-02-00,2XJ-11181-00-00, 2XJ-11631-01-97, 3JM-11351-02-00, 3JM-13621-00-00, B8E-S0000-00-00,....
  • 【Cylinder Piston Ring Gasket Kit Comes With】1 x Cylinder, 1 x Piston, 1 x Piston Rings, 1 x Wristpin, 2 x Circlips, 1 x Needle Bearing, 1 x Head....
Check Stock

YSTOOL 8PCS Engine Compression Tester Kit Automotive 300PSI Cylinder Pressure Test Gauge Tool Set for Auto Car Truck Motorcycle Gasoline Petrol Gas Engine Diagnostic with Red Case

  • This cylinder compression tester kit is a professional tool to test the compression in gasoline engine. The readings will help to diagnosis if there are valve sticking, carbon build-up, piston or cylinder head modified, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, etc. Please note, a variation in compression readings between cylinders is often a better indication of engine problems than the absolute values of compression.
  • There are 4 sizes of brass adapters and 2PCS universal push-on connectors in the engine pressure tester kit. The 10mm 12mm 14mm 18mm adapters can be connected to the corresponding size cylinder head. The straight push-on connector and the curved one use rubber cone tip, can be pushed against on the cylinder head, universal for almost all the size cylinder head.
  • The engine cylinder compression test tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most d....
Check Stock

ABN Spark Plug Thread Repair Rethreading Set 14mm Metric – Rethreading Tool Kit – Comprehensive Taps Inserts & More

  • ...r a tapered seat or a gasket seal type spark plug assembly on a lawn mower, car, or other vehicle engine.
  • Stepped tap ensures correct alignment of cutter in existing spark plug hole.
  • Extension tools allow easy access to the bottom of the plug recess (includes plug inserts).
  • EASY TO USE: Cut a larger threaded hole in cylinder head with tap, screw insert into head, screw plug into insert, use expander to help seat insert by tapping with a hammer.
  • Select insert that covers as much of the plug threads as possible to avoid carbon buildup (this can make unscrewing plug from insert difficult).
  • Use grease on flutes and any cutting tool to catch shavings, clean often, and vacuum when finished (grease not included).
  • EASY STORAGE: Heavy-duty 9.6” x 4.75” x 1.5” inch (24.4cm x 12.1cm x 3.8cm) metal carrying case with a plastic molded insert tray for easy transportation, safe storage, and quick organization.
  • PACKAGE CONTENTS: Package includes drill taps (14mm), tap holder, insert installer, wedge and handle, inserts, Allen wrench hex key, and storage case for your convenience.
Check Stock

Remanufactured Cylinder Heads Assemblies GT40P 302 5.0L 4 Bar Genuine OEM SET/Pair NO CORE CHARGE NECESSARY

  • This kit ONLY fits for Pro Design and SFriding branded cylinder head with o-rings..
  • Aftermarket cylinder head studs kit compliable for Yamaha Banshee 350 1987-2006..
  • Made of high quality 304 stainless steel. Net weight is 250 g (8.82 ounce)..
  • Package includes 10 x studs. Will NOT work for original cylinder head..
  • ✔100% brand new. ✔1 year warranty. We will reply within 24 hours of receiving your email..
Check Stock