Reviews Cyclone Dust Collector For Shop Vac

The Lord of The Rings: The Fellowship of the Ring (Extended Edition)

  • There’s no doubt about it, large cyclone dust collector systems are great! Their value to larger and industrial or commercial workshop settings is immeasurable. What about the rest of us with garage size workshops who don’t want the noise, space consumption or simply the large cost of such a system in their home workshop? The 4” Dust Separator Cyclone Kit is the perfect and economical solution for the everyday woodworker with a smaller to midsize workshop..
  • This cyclone kit will help protect your dust collector from unnecessary wear and tear. Once installed on a barrel, box, or any container (barrel or box not included), this dust and debris separator keeps the larger, heavier chips coming from you machinery from getting into your dust collector impeller. This will ad years to the life of your dust collector and help keep your bag emptying chores to a minimum..
  • The working theory behind cyclone separators is that the heavier wood chips fall to the bottom of the container while the lighter dust particles get pulled in the out feed port and into your dust collector or vacuum. This keeps the large debris from slamming into your dust collector’s impeller or filling up your shop vacuums container to quickly. This also helps prevents any unnecessary ....
Check Stock

4 inch Dust Separator Cyclone Dust Collector Kit for Use with Barrels Trash Cans Buckets or Custom Built Containers

  • There’s no doubt about it, large cyclone dust collector systems are great! Their value to larger and industrial or commercial workshop settings is immeasurable. What about the rest of us with garage size workshops who don’t want the noise, space consumption or simply the large cost of such a system in their home workshop? The 4” Dust Separator Cyclone Kit is the perfect and economical solution for the everyday woodworker with a smaller to midsize workshop..
  • This cyclone kit will help protect your dust collector from unnecessary wear and tear. Once installed on a barrel, box, or any container (barrel or box not included), this dust and debris separator keeps the larger, heavier chips coming from you machinery from getting into your dust collector impeller. This will ad years to the life of your dust collector and help keep your bag emptying chores to a minimum..
  • The working theory behind cyclone separators is that the heavier wood chips fall to the bottom of the container while the lighter dust particles get pulled in the out feed port and into your dust collector or vacuum. This keeps the large debris from slamming into your dust collector’s impeller or filling up your shop vacuums container to quickly. This also helps prevents any unnecessary ....
Check Stock

POWERTEC 70301 Dust Collection Cyclone Separator Lid Kit w/Flexible Hoses Clamps 2 1/2 inch Elbow & Couplers for 2 Stage Dust Collector

  • KIT INCLUDES: (1) Two Stage Cyclone Separator Lid, (1) Dust Port Elbow, (2) 3’ Flexible Hoses, (2) Quick Coupler Connectors, (2) Hose Clamps.
  • FUNCTION: Cyclone dust collection systems cause a vortex action to trap and collect dust & debris inside the bucket/ barrel before it enters the vacuum, helping to prevent a reduction of suction power..
  • FEATURES: Lid possesses a foam gasket for a tight and reliable seal, elbow fitting on the inlet side to promote cyclonic air flow, ultra flex hoses that expand from 10” to 38-3/4 inches – giving you project versatility and leverage to maneuver your way around workshop machines and space.
  • APPLICATION: Quickly and easily converts your shop vacuum and standard five-gallon buckets container into a 2-stage cyclone dust collection system. Provides the necessary fittings required to connect a shop vac with a 2-1/4” ID inlet to a 2-1/2” OD diameter machine port. Perfect for woodworking, CNC machining, workshops and more.
  • PREMIUM: All cyclone dust collector components (excluding stainless steel hose clamps) are made with super lightweight clog-free ABS plastic material known for its temperature resistance and long-term durability.
Check Stock

Dust Right Dust Separator + 36” Flex-Form Hose - Cyclone Dust Collector Separates Sawdust Wood Chips Debris and More – 10-Gallon Translucent Bucket - Dust Collectors for Woodworking for Shop Vacs

  • ...fe: This dust extractor for woodworking extends the life of your filter and impellers by extracting the larger debris before it enters the dust cyclone separator. The vortex effect that is created prevents the loss of suction caused by prematurely clogged filters..
  • Adapting Mounting: The five-caster base of the dust collector bucket makes it exceptionally stable and easy to maneuver around the shop. Our dust collector vacuum hoses connect inside the in/out ports, preventing unintentional disconnections..
  • Maintain Airflow: The dust collector creates a cyclonic airflow that causes most wood dust particles and other materials that are heavier than air to separate, and our woodworking dust collector prevents them from being passed to the vacuum..
  • Efficient Dust Collecting: Our 10-gallon translucent dust collector bucket is easy to empty and easy to tell when it's full. Also, this dust collection separator holds twice the capacity of competitor systems..
Check Stock

Dust Collection Cone Reducer 4-Inch to 2 1/2-Inch plus 6 Vacuum Hose Adapters Fits 1 1/16 to 1 3/4 inches Includes a Shop Vac Adapter 2 1/2 - 1 1/4 inch with Plastic Sleeve and 1 Rubber Reducer

  • Dust Collector Accessories - Included is 7 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters.....
  • Connect 4” ID flexible dust collection hose to 2-1/2” ID flexible dust collection hose. Durable ABS plastic. NOTE: This cone reducer is designed....
  • Useful adapter that allows you to step down from your larger 4 dust collection hose to a smaller 2.5 inch shop vac dust collector hose branch line..
  • Aslo, a shop vac hose adapter to go from 2.5 inch to 1.25 in hose and a rubber step adapter for many purposes that goes from 1.06 inches OD to 1.61....
  • From 4 inch dust collection hose to 2 1/2 dust collection hose to use with your shop dust collectors for dust control. Also smaller adapters for your....
Check Stock

Dust Collection Cone Reducer 4-Inch to 2 1/2-Inch plus 5 Vacuum Hose Adapters Fits 1 1/16 to 1 3/4 inches Includes Shop Vac Adapter 2 1/2 to 1 1/4 inch and 1 Rubber Reducer

  • Dust Collector Accessories - Included is 6 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters. Several for a small dust collection system. Details in photos..
  • Connect 4” ID flexible dust collection hose to 2-1/2” ID flexible dust collection hose. Durable ABS plastic. NOTE: This cone reducer is designed to work with 4” and 2-1/2” hoses - It is NOT intended to fit or accommodate a 2.5 inch OD or 4 inch OD dust collection equipment port directly.
  • Useful adapter that allows you to step down from your larger 4 dust collection hose to a smaller 2.5 inch shop vac dust collector hose branch line..
  • Aslo, a shop vac hose adapter to go from 2.5 inch to 1.25 in hose and a rubber step adapter for many purposes that goes from 1.06 inches OD to 1.61 inches OD. More details of the other adapters in photos..
  • From 4 inch dust collection hose to 2 1/2 dust collection hose to use with your shop dust collectors for dust control. Also smaller adapters for your shop dust collection system or just to connect your vacuum to an attachment(NOTE- 2 Adapters come already connected together but come apart easily)..
Check Stock

POWERTEC 70175 Dust Collection Hose with Fittings Plus Two Reducers , Black

  • ..., joiners, jigs and other power tools. The nominal 2-1/4” adapter should fit most shop vac ports with a nominal ID of 2-1/4”. Shop Vac ports sizes can vary between different manufacturers. Please refer to the actual adapter sizes before ordering, to verify that it will work for your application.
  • DIMENSIONS: Dust collector hose 1-3/16" O.D x 10ft long | ABS vacuum dust hose adapter nominal 2-1/2" O.D actual 2-27/64”| ABS vacuum dust hose adapter nominal 2-1/4" O.D actual 2-19/64” |Small pliable plastic fitting 1" I.D | Large pliable plastic fitting 1-1/2" I.D.
Check Stock

Dust Right 2.5'' Shop Vac Hose Kit – Expandable Blue Shop Vac – 2-1/2” Elastic, Flexible Polymer Vacuum Hose Extend up to 12’ L – Kit Includes 2.5” Expandable Hose, 2-1/2 Hose Clamp, Swivel Fittings

  • 2-1/2” Blue Shop Vacuum Hose Extension Kit: This incredibly stretchy 2-1/2'' dust vacuum hose extends up to 12 ft. in length, then collapses back into a compact 2 ft. stack for storage. The dust collector hose weighs 30% less than previous versions and is offered in a blue translucent color..
  • Helps To Prevent Tangling & Tripping: This dust collection hose allows you to reach most areas of your shop, without the hassle of a long, cumbersome hose. As you move closer to your shop vacuum, it retracts to take up excess slack, which helps prevent tangling and tripping..
  • Fits In Standard Shop Vac: With the two included swivel fittings, our dust collection hose can easily connect to your shop vacuum, optional dust right accessories, and many dust ports..
  • Durable Material: The shop vac hose is made of an amazingly elastic, flexible polymer which you can apply for a long time and stretches from approximately 2' to 12' in length..
  • What’s Included? This dust collection hose with fittings kit includes (1) Dust Right 2-1/2'' Diameter. Shop Vac Extension Hose (expands from 2' to 12'), (2) 2-1/2 Hose Clamps, and (2) Swivel fittings..
Check Stock

Oneida Air Systems Super Dust Deputy (4/5 DIY)

  • LONGER LIFERSPAN - Prevents fine dust and large debris from reaching your dust collector, prolonging the lifespan on your filter and reducing the need for cleanings..
  • HIGH EFFICIENCY - Integrated air ramp and neutral-vane inlet provide ultra-high efficiency..
  • SIZED RIGHT – Retrofits on 1 HP – 3 HP single-stage dust collectors. 4/5 Cyclone with included adapters offers 4 or 5" OD inlet (connects to your tools) and 4 or 6" OD outlet (connects to your collector). Approximately 23" height..
  • EASY INSTALLATION - Compatible with almost any dust collector, the lightweight and compact design makes for fast and simple installations. Ready out of the box to connect to your dust collector with either a 4” or 6” hose, and to your tools with either a 4” or 5” hose. Includes cyclone, 2x reducer adapters, assembly gasket and hardware..
Check Stock

Dust Collection Fittings with Shop Vac Hose Adapter Accessories 4 in to 2 1/2 in plus 2 1/2 inch Vacuum Hose Adapter for Shop Vac Attachments In Your Work Shop Wet Dry Vac Attachment Exhaust Kit

  • Dust Collector Accessories for the everyday craftsman - Included are 3 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters. Small dust collection system. See photos for detailed measurements..
  • Connect your 4" inner diameter hose to 2 1/2" dust collection hoses.*** NOTE: This cone reducer is designed to work with 4” and 2-1/2” hoses - It is NOT intended to fit or accommodate a 2.5 inch OD or 4 inch OD dust collection equipment port directly. A rubber coupler or a short section of hose will let you connect this adapter directly to your dust collection port..
  • 2 1/2 in. Wet/Dry Vacuum Universal Tool Adapter Attachment - Made out of rubber this vacuum adapter can be cut to fit various sizes. Connect it to your wet dry shop vac accessories. If it doesn't fit apply some heat by running it under hot water. This will loosen the rubber and allow it to fit snug. Check the diameter i the photos to see what size your hose needs to be..
  • Use the shop vac attachment to connect more accessories to your dust collection system. The shop vac adapter dimensions are 2 1/2 to 1 1/4 inches. Fits most wet dry vac attachments but ***check photo for dimensions.***.
  • These 3 adapters can be used if you need a universal vac attac....
Check Stock

Cyclone Dust Collector 2.0” DIY Dust Separator Extractor with 2 Filters, Shop Dust Collector Accessories Cyclone Vacuum Cleaner Filter, for Woodworking, Ash, Metal Shavings, Grain etc

  • DIAMETER 2.0”: 2″ OD inlet (connects to your tools) and 2″ OD outlet (connects to your collector). If the size of the hose is too small, you can heat the hose and then put it on the diameter of the dust collector. The diameter of the air inlet and outlet of our dust collector is 2.0”, if you are 1.25”, 1.5”, 2.5” or other caliber vacuum cleaners, you can buy a caliber converter yourself. Total dimensions are approx. 30 cm (H) x 14cm (W). Very compact and space-saving..
  • FILTER : No. 1 filter element: Through Hole (For woodworking sawdust, dust, etc.), filter element with large holes at the bottom, No. 2 filter element: Blind Hole (Only for ash), filter element without large holes (need to be equipped with a motor above 1200W). Only applicable to ash, such as: stove ash, grass ash and other burning residues (To avoid blockage, remember not to use it in other scenarios)..
  • SUITABLE for STURDY BUCKET: Because our product has a good seal, we hope you can notice that when the vacuum cleaner is sealed with the bucket, the suction will be very strong, thinner barrels are relatively difficult to withstand strong suction, so it is more prone to the deformation of the bucket. In this case, it is only necessary to replace the bucket with a strong....
Check Stock

Mullet High-Speed Cyclone Dust Collector

  • THE FASTER THE SPIN, THE MORE DUST THAT FALLS IN! -- Parabolic design and seamless one-piece construction create a faster airstream, more suction power and better capture efficiency than ordinary straight-wall cyclone-and-bucket assemblies..
  • RIGID, CUT-TO-FIT PVC CONNECTION -- Eliminates the Frankenstein-like assembly of bolts, bungees, and duct tape of other systems creating a unified, airtight connection and a vac filter that stays cleaner, longer..
  • UNIVERSAL VAC COMPATIBILITY -- Included Hose Adapters allow for easy connection to virtually all wet dry shop vacuums, dust extractors and their hoses. Red, orange, yellow or green.
  • MADE IN USA -- Headquartered in Dripping Springs, Texas..
Check Stock

Shop Fox W1867 1.5 Hp Portable Cyclone Dust Collector

  • THE FASTER THE SPIN, THE MORE DUST THAT FALLS IN! — Parabolic design and seamless one-piece construction create a faster airstream, more suction power and better capture efficiency than ordinary straight-wall cyclone-and-bucket assemblies..
  • RIGID, CUT-TO-FIT PVC CONNECTION — Eliminates the Frankenstein-like assembly of bolts, bungees, and duct tape of other systems creating a unified, airtight connection and a vac filter that stays cleaner, longer..
  • UNIVERSAL VAC COMPATIBILITY — Included Hose Adapters allow for easy connection to virtually all wet dry shop vacuums, dust extractors and their hoses. Red, orange, yellow or green.
  • MADE IN USA — Headquartered in Dripping Springs, Texas..
Check Stock