Reviews Cwdm sfp 1550

Mini 3G SDI Fiber Extender 1080P 3G-SDI Over Fiber Converter Broadcast Level SDI Video Fiber Optic Converter Include SFP Module Single-Mode Single Fiber 20km with RS485 Tally Loop Output

  • 3G-SDI Video: The SDI Fiber converter support 3G/HD/SD SDI with 8-channel audio embedded, resolution up to 1080P&60HZ, Automatic reclocking 270Mbit/s - 1.48Gbit/s - 3Gbit/s.
  • Support Rs485&Tally: The 3G SDI to fiber converter support both Backwards RS485(Max 57600) and Tally. You can control other device or use Tally Function in broadcast.
  • Small Size: The 3G SDI Fiber Extender only 2.8*1.7*0.9 inch in size, it’s very compact and can install on cameras.
  • Loop output: The 3G SDI Fiber Optic transceiver support loop output, you can see the image easily in local side.
  • Support CWDM/DWDM SFP: The Fiber optic support CWDM/DWDM technique. You can use CWDM/DWDM SFP module when you only have limited fiber cable resource.
Check Stock

1.25G/2.5Gbps Two Ports SFP OEO Mode Converter, SFP Repeater (without Transceiver)

  • [How to Use] Singlemode and Multimode converted by transceivers, Dual Fiber and Single Fiber converted by transceivers, SFP to CWDM SFP converter..
  • [Multirate] Support for SFP transceivers with data rates from 100Mbps to 2.5Gbps through two SFP slots. (Important: Use matching speed modules in SFP1 and SFP2 only.).
  • [Protocol Transparent] Compliant with all protocols, as long as the data rate is correct..
  • [Easy Installation and Use] Modulization configuration design, support hot-swappable, plug and play. LED indicators for P1, P2, POWER can dynamic feedback link connection state and fault detection to easily monitor network status..
  • [Warranty] 3-year warranty and lifetime technical support..
Check Stock

QSFPTEK 10GBASE-ER SFP+ Module, 10giga Mini GBIC SFP 1550nm, 40km, 10GE Gigabit Ethernet DDM LC Single-Mode Fiber Optic Transceiver for Cisco SFP-10G-ER, Ubiquiti, Netgear, Mikrotik

  • Wide Compatibility: Compatible for Cisco SFP-10G-ER, Ubiquiti, Mikrotik, D-Link, Supermicro, Netgear and Other Open Switches. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports..
  • 10GBASE-ER SFP+ fiber module: 10Gb/s data rate, duplex LC connector, 1550nm wavelength, the transmission distance up to 40km, working temperature: -5℃ ~ +70℃, Tx Power(dBm): -2 ~ 4, Rx Sens.(dBm): < -15.8..
  • Easy to use: SFP+ 10G single-mode transceiver, plug and play, hot-pluggable. DDM support: DDM allows you to monitor the critical information, to find out some potential problems..
  • 100% high quality products: We always strictly control product quality, every module had been individually tested on switches before shipping, customers can rest assured to buy..
  • We offer many compatible options, if your brands are not listed here, please contact us. QSFPTEK is a manufacturer of transceiver, customized service is available..
Check Stock

Lenovo Dcg Optics TX 1310Nm Rx 1550Nm Fd

  • Juniper - SFP (mini-GBIC) transceiver module - GigE - 1000Base-BX - 1310 (TX)/ 1550 (RX) nm - for.
Check Stock

Lenovo Dcg 01DD530 Optics TX 1550Nm Rx 1310Nm Fd

  • Juniper - SFP (mini-GBIC) transceiver module - GigE - 1000Base-BX - 1550 (TX)/ 1310 (RX) nm - for.
Check Stock

Add On Xfp Module

  • For data Networking, Optical Network 1 10gbase-cwdm network.
Check Stock

Add On Xfp Module

  • For data Networking, Optical Network 1 10gbase-cwdm network.
Check Stock

Ubiquiti UniFi Dream Machine SE (UDM-SE)

  • Ubiquiti ER-X-SFP EdgeRouter X Gigabit Router 6-Port PoE, SFP, supports 24V passive PoE to power up to five airMAX devices. 5 Gigabit ports and 1 Gigabit SFP port for backhaul applications..
  • The EdgeRouter X SFP combines cost-effective routing performance with the convenience of passive PoE support in a compact form factor..
  • ER‑X‑SFP supports 24V passive PoE to power up to five airMAX devices..
  • At $79 USD MSRP the EdgeRouter X SFP offers a breakthrough combination of value and performance in routing with passive PoE support..
  • The EdgeRouter X SFP features 5 independent Gigabit RJ45 ports and 1 Gigabit SFP port all six are configurable for switching. SFP port provides fiber connectivity to support backhaul applications for carrier-class networks..
Check Stock

CUB CADET 717-1550F Steering Gear LGT SLT SLTX LGTX GT LT LTX 1040 1042 1045

  • Genuine OEM CUB CADET Part Number 717-1550F Replaces Prior MPN 917-1550E 717-1550E 717-1550D 717-1550C 717-1550A 717-1550.
  • FITS MODELS: 1170, 1180, 1212, 1515, 1517, 1525, 1527, 1529, 1600, 1800, GT-1054, GT-1222, GT-1554, GT-1554VT, GTX-1054, LGT-1050, LGT-1054, LGTX-1050, LGTX-1054, LT-1018, LT-1022, LT-1024, LT-1040, LT-1042, LT-1045.
  • ALSO FITS: LT-1046, LT-1050, LTX-1040, LTX-1042, LTX-1045, LTX-1046, LTX-1046KW, LTX-1046M, LTX-1046VT, LTX-1050KH, LTX-1050KW, LTX-1050VT, SLT-1550, SLT-1554, SLTX-1050, SLTX-1054, SLTX-1054VT.
Check Stock

GiTi SFP 10G SFP+ DAC Cable, 10GBASE-CU Twinax SFP+ Cable Direct Attach Copper(DAC) Passive Cable Cisco Compatible for SFP-H10GB-CU0.5M Ubiquiti D-Link Supermicro Netgear Mikrotik, 0.5m (1.64ft)

  • Product Feature: 10Gb SFP+ to SFP+ DAC twinax passive cable 0.5m(1.6ft). 30AWG. High quality chip, fast transmission and low power consumption. All sfp+ dac cables come with dust cover and anti-static packaging..
  • Strict Quality Test: Each DAC cable must pass the signal integrity test and compatibility test before shipment. Compliant to SFP+ MAS, SFF-8432 and RoHS compatible. I/O Connector designed for high speed differential signal applications..
  • Widely Compatible: GiTi SFP 10Gbase sfp+ dac cable is compatible for Cisco SFP-H10GB-CU0.5M, Meraki, Ubiquit, Mikrotik, Intel, Fortinet, Netgear, D-Link, TP-Link, Linksys, Broadcom, Zyxel, etc..
  • Cost-saving & Effective: 1*twinax cable + 2*SFP+ connectors is equivalent to a 2*10G sfp+ optical module plus an optical fiber jumper, budget-saving, environmental-friendly, stability and durability, no need to expose interfaces and repeated plugging and unplugging..
  • Applications: 10g sfp+ cable is widely used in fiber switch, router, server,firewall, NIC, media converter, data centers, storage area networks, network attached storage, and other fiber optic equipments with SFP+ ports etc..
Check Stock

SEEBOO Steering Sector Pinion Gear Rebuild Kit Compatible with Cub Cadet Replace# 717-1550F 7171554

  • 【COMPATIBLE WITH MTD Cub Cadet Troy-Bilt 】— Replaces OEM: 7171550, 717-1550F, 717-1550, 7171554, 1193976, 1120862, 717-1550A, 717-1550B, 717-1550C, 717-1550D, 717-1550E, 917-1550E.
  • 【REPLACEMENT THE STEERING SECTOR PINION GEAR REBUILD KIT 】— Steering Sector Pinion Gear Rebuild Kit Compatible with MTD Cub Cadet Troy-Bilt!.
  • 【HIGH QUALITY 】— 100% Brand New Steering Sector Pinion Gear Rebuild Kit is Made of Quality Steel,The Surface Is Black And Rust-Proof,Durable, Reliable, Perfect Fit.
  • 【PLEASE NOTE 】— Please Check the OE Number of the Original Parts and Compare the Original Parts with the Picture of the Product to Ensure You are Ordering the Right Part!.
  • 【AFTER-SALES SERVICE 】— 2 years warranty. If You Are Not Satisfied With Steering Sector Pinion Gear Rebuild Kit, Please Return It Within 30 Days For A Full Refund. A Truly Worry-Free Shopping Experience!.
Check Stock

TUELETFU Steering Sector Gear Plate for Mtd Bolens Cub Cadet Yardman Troy Bilt Replaces 717-1550 717-1550A 717-1550B 717-1550C 717-1550D 717-1550E 717-1550F

  • Application: For MTD Bolens Cub Cadet Yard Machines Yard-Man Troy-Bilt models.
  • Also fits 13A Series mowers and Cub Cadet YT4218, YT4220, GT5024 and GT5427.
  • Replaces: 717-1550, 717-1550A, 717-1550B, 717-1550C, 717-1550D, 717-1550E, 917-1550E, 717-1550F, 917-1554.
  • Package Included: Package comes with a steering sector gear plate with shaft pinion gear and bolt nut.
  • Note: Please carefully check all the product information to make sure this is the right one you want before placing an order.
Check Stock

717-1550F Steering Sector Plate Pinion Gear Kit - Compatible with MTD/ Cub Cadet / Troy Bilt Replaces 717-1550F 917-1550E 717-1550E 7171550 7171554 1193976 1120862

  • Replacement part number :717-1550F 717-1550E 7171550 7171554.
  • Replaces 717-1550A, 717-1550B, 717-1550C, 717-1550D, 917-1550E.
  • Compatible with Toro models: 1193976 / 1120862 - Also Compatible with: 13A Series mowers and Cub Cadet YT4218, YT4220, GT5024 and GT5427.
  • Compatible with the following brand models: MTD, CUB CADET, TROY BILT, Yard Machines Yard-Man.
  • Compatible with Cub Cadet models: lt1050, lt 1045, lt1042, LTX1045.
  • Product contents: As shown in the picture, the product contains all the accessories in the picture. Please read our product description carefully before purchase to ensure that the products you need are consistent with our products..
Check Stock