GSP NCV10235 CV Axle Shaft Assembly - Left Front Driver Side
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth,....
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme....
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable....
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes....
Check StockSixity 2003-2008 for Yamaha 660 Grizzly 4X4 Rear Left Axles Back Driver YRM660FGHX GX Complete Side
- Note: YRM660FGHX GX. INSTALL FAST, RIDE FAST: Sixity XTA Axles arrive fully assembled including inboard and outboard universal CV joints for quick installation.
- TAP INTO THE POWER OF CHROME-MOLY: chrome-moly is a steel alloy made of chromium (the hardest metal on the Mohs scale) and molybdenum. At 200 percent stronger than standard 1020 stainless steel, and 92 percent stronger than 4130 chrome-moly, the 4340 chrome-moly steel bar showcases high strength-to-weight ratio, exceptional tensile strength, and formidable impact resistance in order to withstand extreme levels of torque and ensure durability through the roughest terrain.
- RIDE WITH OFF-ROAD-TOUGH CV JOINTS: the heavy-gauge neoprene boots are made of an elastic compound much more difficult to puncture than rubber, and they vastly outperform thermoplastic boots in flexibility and environmental protection, delivering abrasion resistance, longer wear life, and oil/grease resistance.
- PUT IT TO THE TEST: recommended for intense mudders, the Sixity XTA axles feature induction heat-treated bearings that reduce friction and increase CV-joint strength and durability. High-temperature and high-load-bearing moly grease packed into the boot helps to ensure long-lasting CV-joint life.
Check StockSixity 2003-2008 for Yamaha 660 Grizzly 4X4 Rear Right Axles Back Passenger YRM660FGHX GX Complete Side
- Note: YRM660FGHX GX. INSTALL FAST, RIDE FAST: Sixity XTA Axles arrive fully assembled including inboard and outboard universal CV joints for quick installation.
- TAP INTO THE POWER OF CHROME-MOLY: chrome-moly is a steel alloy made of chromium (the hardest metal on the Mohs scale) and molybdenum. At 200 percent stronger than standard 1020 stainless steel, and 92 percent stronger than 4130 chrome-moly, the 4340 chrome-moly steel bar showcases high strength-to-weight ratio, exceptional tensile strength, and formidable impact resistance in order to withstand extreme levels of torque and ensure durability through the roughest terrain.
- RIDE WITH OFF-ROAD-TOUGH CV JOINTS: the heavy-gauge neoprene boots are made of an elastic compound much more difficult to puncture than rubber, and they vastly outperform thermoplastic boots in flexibility and environmental protection, delivering abrasion resistance, longer wear life, and oil/grease resistance.
- PUT IT TO THE TEST: recommended for intense mudders, the Sixity XTA axles feature induction heat-treated bearings that reduce friction and increase CV-joint strength and durability. High-temperature and high-load-bearing moly grease packed into the boot helps to ensure long-lasting CV-joint life.
Check StockGSP NCV53595 CV Axle Shaft Assembly - Left or Right Front Driver or Passenger Side
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth,....
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme....
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable....
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes....
- Left or Right Front (Driver or Passenger Side).
Check StockOMT Inner CV Axle Puller Tool Set with 5/8"-18 Slide Hammer & Adapter | Inner CV Joint Removal Tool Kit | Front Wheel Drive Axle Puller Set Compatible with Taurus Sable FWDs from 1986 to 2021
- PULL CV JOINTS & AXLES: This CV joint puller tool set by Orion Motor Tech is compatible with Ford Taurus and Mercury Sable models from 1986 to present, loosening and removing their front wheel drive axles and hidden retaining rings in minutes.
- MULTIPURPOSE SLIDE HAMMER: Our slide hammer weighs 7 pounds for extra strength to give you a straight and even pull for damage-free removal of the axle assembly.
- its threading also lets you use it with other 5/8"-18 adapters to deal with other makes and models or to handle other work around your engine.
- DURABLE PULLER ADAPTER: The U-shaped CV joint fork has a 2-inch opening and 2.4-inch depth to firmly lock onto your Sable or Taurus axle assembly, making removal of stuck CV joints a cinch.
- QUICK & EASY OPERATION: These automotive tools work together to provide straight and even force so your constant velocity axle pops out smoothly, leaving the roller bearing inside the joint and the rest of your vehicle untouched.
- BUILT TO LAST: Made of premium AISI 1045 medium carbon steel, our CV joint removal set provides strong and dependabl....
Check StockSlippery Pete Fluid Pump for Gallon Bottles and Wide Mouth Quart Bottles (Not for Standard Quart Bottles) - Transfer Gear Oil, Transmission and Differential Fluid, Antifreeze with This 30cc Hand Pump
- ...tic Polyester Elastomer (TPE) and Cold Resistant Rubber (CRR) for a tougher boot with extreme temperature resistance, ensuring reliable performance in temps from -50 C to + 248 C.
- XD Clamps - Durable, stepless ear clamps provide consistent pressure around the boot, ensuring a proper seal that keeps the grease on the joint where it belongs, no matter the extreme driving conditions encountered.
- XD Grease - High quality, temperature resistant grease, with higher frictional and abrasion resistance at extreme temperatures, ensures XD series axles enjoy superior CV joint protection, contributing to a lifetime of smooth, dependable performance.
- Left or Right Front (Driver or Passenger Side).
- Compatible with select vehicles (verify fitment details with fit checker above): CADILLAC: 1999-05 Escalade.
- CHEVROLET: 2002-06 Avalanche 1500, 1988-99 K1500 Pickup, 1995-99 K1500 Suburban, 1999-06 Silverado 1500, 2007 Silverado 1500 Classic.
- CHEVROLET: 2000-06 Suburban 1500, 1995-06 Tahoe.
- GMC: 1988-99 K1500 Pickup, 1995-99 K1500 Suburban, 1999-06 Sierra 1500, 2007 Sierra 1500 Classic, 1995-06 Yukon, 2000-06 Yukon XL 1500.
Check StockABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter
- [Remove Front Wheel Drive Axles Easily] To replace or repair your constant velocity (CV) axle joints, use the ABN Front Wheel Drive Axle Puller Attachment.
- Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles.
- [Works with Your Slide Hammer] The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps.
- Fits slide hammers with 5/8-inch x 18 threads.
- [Easy to Use] Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
- Use the slide hammer to create torque to pull out the axle.
- Use lubricant fluid for added ease (not included).
- [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
- Pulls CV joints on 1986-current Taurus/Sable.
- [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while r....
Check StockVCT 23" Long 5lb Slide Hammer Inner CV Joint Puller
- The set includes a 23-inch T-style slide hammers bar, a 5 lb hammer weight, a nut, and a 2-inch opening 2.5-inch depth slide hammer CV axle adapter. They will remove the axle assembly without damage on 1986 to current Taurus and Sable..
- The slide hammer and puller design provide a straight and even pull to protect joint off damage. The round bead on the puller will stop the hammer so it can never hurt the hand pulling on T-shaped handle..
- Our CV joint puller adapter and large slide hammer bearing puller will create added torque to impose a large pressure on CV axle. This tool set could easily loosen and remove stubborn CV axles in minutes..
- The product is made of premium steel, all the parts have hardened and finished with high-temperature oxide to ensure superior durability and rust and corrosion resistance..
Check StockABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter
- [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
- The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
- [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
- [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
- Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
- Use lubricant fluid for added ease (not included).
- [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
- Pulls CV joints on 1986-current Taurus/Sable.
- [Built to Last] Hardened hammer shaft provides strength and d....
Check StockSixity XT Front Right Axle compatible with Polaris Sportsman 400 500 HO 600 700 EFI 800 MV7 2005-2006 - CV Assembly - Driveline Axles
- ...xles are proven to deliver outstanding performance for all types of trail and off-roading quads and 4-wheelers. Designed for durability through challenging terrain for all levels of riders, Sixity XT CV axles outperform OEM axles in both quality and price. Sixity Axles include both inboard and outboard CV/universal joints and come complete and fully assembled for quick installation.
- RIDE TROUBLE-FREE: the Sixity XT Axle features a robust 5140 chrome steel shaft and flexible puncture-resistant neoprene boots that maximize durability while high-temperature and high-load-bearing moly grease extends the life of the CV joint. Precision CNC-machined surfaces provide superior balance and dynamic range. Manufactured under ISO/TS 16949 and ISO 9001 Quality Standards, the precise OEM dimensional specifications ensure vehicle fitment and product reliability.
- THE SIXITY ADVANTAGE: Sixity has made it their mission to help diehard ATV, motorcycle, and snowmobile riders find affordable - and awesome - replacement parts for their machines. With the Sixity brand, you'll find precision-made powersport parts built to exacting specifications, from extreme-duty ATV and UTV axles to a wide variety of motorcycle brake pads. Sixity is focused on providing unsurpassed value, c....
Check Stock2 pc Sixity XT Rear Left Right Axles compatible with Polaris Ranger RZR 800 EPS LE XC Edition 2008-2014 - CV Assembly - Driveline Axles
- ...xles are proven to deliver outstanding performance for all types of trail and off-roading quads and 4-wheelers. Designed for durability through challenging terrain for all levels of riders, Sixity XT CV axles outperform OEM axles in both quality and price. Sixity Axles include both inboard and outboard CV/universal joints and come complete and fully assembled for quick installation.
- RIDE TROUBLE-FREE: the Sixity XT Axle features a robust 5140 chrome steel shaft and flexible puncture-resistant neoprene boots that maximize durability while high-temperature and high-load-bearing moly grease extends the life of the CV joint. Precision CNC-machined surfaces provide superior balance and dynamic range. Manufactured under ISO/TS 16949 and ISO 9001 Quality Standards, the precise OEM dimensional specifications ensure vehicle fitment and product reliability.
- THE SIXITY ADVANTAGE: Sixity has made it their mission to help diehard ATV, motorcycle, and snowmobile riders find affordable - and awesome - replacement parts for their machines. With the Sixity brand, you'll find precision-made powersport parts built to exacting specifications, from extreme-duty ATV and UTV axles to a wide variety of motorcycle brake pads. Sixity is focused on providing unsurpassed value, c....
Check Stock2 pc Sixity XT Rear Left Right Axles compatible with Polaris Ranger 4x4 500 EFI 800 Crew EPS LE HD XP 2010-2014 - CV Assembly - Driveline Axles
- ...xles are proven to deliver outstanding performance for all types of trail and off-roading quads and 4-wheelers. Designed for durability through challenging terrain for all levels of riders, Sixity XT CV axles outperform OEM axles in both quality and price. Sixity Axles include both inboard and outboard CV/universal joints and come complete and fully assembled for quick installation.
- RIDE TROUBLE-FREE: the Sixity XT Axle features a robust 5140 chrome steel shaft and flexible puncture-resistant neoprene boots that maximize durability while high-temperature and high-load-bearing moly grease extends the life of the CV joint. Precision CNC-machined surfaces provide superior balance and dynamic range. Manufactured under ISO/TS 16949 and ISO 9001 Quality Standards, the precise OEM dimensional specifications ensure vehicle fitment and product reliability.
- THE SIXITY ADVANTAGE: Sixity has made it their mission to help diehard ATV, motorcycle, and snowmobile riders find affordable - and awesome - replacement parts for their machines. With the Sixity brand, you'll find precision-made powersport parts built to exacting specifications, from extreme-duty ATV and UTV axles to a wide variety of motorcycle brake pads. Sixity is focused on providing unsurpassed value, c....
Check StockSixity XT Rear Right Axle compatible with Polaris Ranger 500 570 570-4 Crew EPS 570-6 Full-Size LE EFI Hunter Edition ETX 2014-2019 - CV Assembly - Driveline Axles
- ...xles are proven to deliver outstanding performance for all types of trail and off-roading quads and 4-wheelers. Designed for durability through challenging terrain for all levels of riders, Sixity XT CV axles outperform OEM axles in both quality and price. Sixity Axles include both inboard and outboard CV/universal joints and come complete and fully assembled for quick installation.
- RIDE TROUBLE-FREE: the Sixity XT Axle features a robust 5140 chrome steel shaft and flexible puncture-resistant neoprene boots that maximize durability while high-temperature and high-load-bearing moly grease extends the life of the CV joint. Precision CNC-machined surfaces provide superior balance and dynamic range. Manufactured under ISO/TS 16949 and ISO 9001 Quality Standards, the precise OEM dimensional specifications ensure vehicle fitment and product reliability.
- THE SIXITY ADVANTAGE: Sixity has made it their mission to help diehard ATV, motorcycle, and snowmobile riders find affordable - and awesome - replacement parts for their machines. With the Sixity brand, you'll find precision-made powersport parts built to exacting specifications, from extreme-duty ATV and UTV axles to a wide variety of motorcycle brake pads. Sixity is focused on providing unsurpassed value, c....
Check Stock