Reviews Cutting Machine Cutter Leaves

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm (CUT35 110V)

  • ✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine..
  • ✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 8mm in 110V 60PSI Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!.
  • ✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal..
  • ✤ The plasma cutter easy to cut stainless steel, Alloy steel, mild steel, Copper etc. Quality cutting torch PT31 come with machine, Max cutting thickness is 10mm at 40Amps 110V 60PSI..
  • ✤ Machine come with 110V power plug, We provide three years warranty for this unit..
Check Stock

Glass Cutter Head for CNC Machine,2 Pcs Tungsten Steel Cutting Wheel Replacement Cutter Head,Automatic Lathe Glass Cutter Replacement Knife Head for Cutting Most Glass Mirror Material

  • Sharp Tungsten Steel Wheel：Replacement Cutter Head for CNC Glass Cutting Machine is made of high-quality sharp and durable tungsten steel with stainless steel bracket.high hardness and not easy to crack..
  • High Carbon Steel Gasket：Glass cutter head with widened and thickened high carbon steel gasket, has good stability and safer operation..
  • Alloy Cutter Shaft：Bold alloy cutter shaft is firm and strong, rolling smoothly, smooth cutting, and more flexible when cutting glass..
  • Easy Identification：Laser engraving cutter head Degree for easy identification,easy to replace and install.
  • Application Scenarios：Glass cutting wheel perfect for cutting most glass mirror material,Glass cutter tools for machine use only,Do not cut manually.
Check Stock

Little ELF The Original Gift Wrap Cutter (2-Pack) | As seen on Shark Tank | Holiday Wrapping Paper Cutter

  • Gift Wrapping Made Fun and Easy! - As Seen on Shark Tank, Little ELF Gift Wrap Cutter has revolutionized the gift wrap industry by making it easier for people to cut wrapping paper. Little ELF is a patent-pending device that is the most efficient, safe, and easy tool for cutting wrapping paper..
  • Easy and Safe - Little ELF Gift Wrap Cutter is designed specifically for easy and safe use. The cutting tool keeps users safe with a durable embedded steel blade. The cutter is also made from high-quality, smooth, and long lasting plastic. Made in the USA, the device fits around rolls that are 2.25 inch or smaller in diameter. The sliding cutter is also a great tool for cutting vinyl for craft projects, bulletin board paper, and other rolled papers..
  • Slice with perfection - Gift wrap cutting has always been a challenge with scissors! Scissors often rip, tear, and ruin the wrapping paper. Stop wasting paper and money! Getting the perfect cut is now incredibly easy with Little ELF. Get a straight, clean, and smooth cut every time. Little ELF is designed to make cross cuts as well, so it is perfect for trimming sheets..
  • Revolutionary - The traditional and outdated method of cutting with scissors always leaves the paper either jagged, ripped, or crooked. Now, ....
Check Stock

Portable Paper Cutter Guillotine Paper Trimmer Scrapbooking with Security Safeguard for Standard Cutting of A2 A3 A4 A5 Paper, Photos or Labels - Black

  • ...er]: This cutter is light weighted and very easy to use at office, school or home. Only work when you press the blade, perfectly protect user the paper cutter also includes a protective rail guard and latch hook lock to protect kids / students users..
  • [Multifunctional Paper Cutter]: Design to cut A3/A4/A5 Paper, max cutting size: 320*80mm, max cutting thickness: 8-12pcs of 70g papers, the sharp blade of the paper trimmer slides paper neatly and easily, leaves clean lines, no fuzz or jagged edges, easily provide you perfectly cutting experience.
  • [DIY Cutting Tool]: Ideal for all your scrapbook page trimming needs, including origami paper, DIY gift cards, wedding invitation, photos, scrapbook, labels, coupons and more paper products. Suitable for home, office, and school. but all should be paper stuff. Swing-out ruler provides accurate measurements.
  • [Sharp Cutter]: Ideal for cutting a wide variety of craft materials. Designed to cut A2 A3 A4 A5 paper, photos, labels, cards and more, The trimmer can cleanly cut through thicker materials easily.
  • [High Quality & Durable]: This paper cutter is made of high-quality steel and plastic. The durable solid metal base and sturdy blades make accurate and straight cuts, also easily portable and never deformed nor broke....
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • Non-Touch Pilot Arc: 50Amp plasma cutter, pilot arc technology allows you to cut without touching the tip of the metal, effectively cutting rough, painted and rusty surfaces, producing minimum slag, maximum cutting thickness of 14mm, ideal cutting thickness of 10mm..
  • TIG & MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the p....
Check Stock

PVC Cutter 2-1/2\

  • 【Wide range of applications】: The ratchet cutter is designed up to 2-1/2-inch (63mm) outer diameter,cutting knife is very suitable for all kinds of plastic pipes(PVC, CPVC, PP-R, PEX, PE, etc),Great helper for home handy man, plumbers, electricians, and vehicle mechanics..
  • 【Heavy duty】: The tubing cutter blade itself is made of SK5 material with high strength and hardness. The surface is covered with Teflon coating,high hardness,smooth, sharp,Cutting quickly..
  • 【Ratchet design】: The pipe cutting machine adopts ratchet drive technology, cutting pipe with less effort and improving work efficiency. Pressing the self-locking during use can prevent the cutter from springing back, cutting the pipe faster, saving energy and safety.and the triangular convex point design at the blade can better cut the pipe..
  • 【Ergonomic design】: The bottom handle adopts ergonomic grip to protect the hand, which can make single stroke cutting quickly and easily, Suitable for long hours..
  • 【Safe and convenient for you】: Put the pipe to be cut into the corresponding knife edge, and continuously clamp and tighten the handle to easily cut the pipe. After use, just fasten the safety lock at the bottom, and the pipe cutting machine will become small and easy to carry o....
Check Stock

ATEZR P20 Plus 120W Laser Engraver with KA Air Assist, 20W Laser Power Laser Cutter, Laser Engraver and Cutter Machine for Wood and Metal, Large Working Area 17”*17”-Grey

  • - ATEZR P20 PLUS Laser Cutter Machine with KA Air Assist, which is a laser cutter and engraving machine with 120W machine power and 20-24W laser power. With an ultra-fine compressed spot down to as small as 0.06 x 0.08mm, Atezr laser cutter and engraver machine is capable of cutting 15mm paulownia wood and 10mm acrylic in one pass, as well as up to 25mm paulownia wood, 40mm acrylic, and 0.05mm steel sheet..
  • & - Achieve high efficiency and accuracy with ATEZR P20 Plus laser engraver and cutter machine, which has a unique industrial design and a sturdy frame made of high-density Aluminum Alloy. With motion stability under high-speed up to 24,800mm/min, Atezr laser engraver for wood and metal saves 40%-80% time compared to 10W machines. The working area of the engraving and cutting machine has been expanded to a large range of 17x17 inches to meet your various creation needs..
  • - - Stay safe and comfortable while using ATEZR P20 Plus laser cutting machine, equipped with a 32-bit motherboard and a red emergency button that allows you to stop the operation at any time. There are also 2 limit switches installed on the X-axis and Y-axis to locate the laser module and....
Check Stock

French Fry Cutter Stainless Steel , Potato Slicer Cutter, French Fry Maker with 2 Blades, Perfect for French Fries Air Fryer

  • 【Unmatched Kitchen Partner】Say goodbye to the hassle of manually cutting potatoes, cucumbers or other veggies with French Fry Cutter. Our fry cutter is designed to easily prepare fries at a perfect length for deep fryers and air fryers. Make sure your family and customers enjoy delicious and fresh fried with potato cutter.
  • 【Multifunctional】Potato cutter machine comes with 2 easily interchangeable blades that perfectly cut 1/2" or 1/3" thick - 3" long pieces of fries, providing perfect cutting results for regular or thinner sized fries. Perfect for cutting potatoes, carrots, vegetables, onions, zucchinis, cucumbers. You can also cut sweet potatoes, we recommend microwaving them for 1 minute first to soften, then let them cool before handling.
  • 【Premium Quality】This potato cutter for french fries is made with high-quality, highly durable professional grade stainless steel. Ergonomic and Extended handle design easier to make homemade fries. Slice fast and easy to use, guaranteed to withstand the test of time without breaking.
  • 【Easy to Use & Quick Cutter】Easy prep your fries and vegetables. Our french fry cutter lever firmly presses your potato through the sharp stainless steel blades. Built with sturdy legs and suction cup base to allow you ....
Check Stock

Mophorn Vinyl Cutter Machine 53 Inch Vinyl Cutter 1350mm Plotter Cutter LCD Display Vinyl Plotter Cutter Machine Signmaster Software Sign Making Machine with Stand PC ONLY

  • [WORKING CAPACITY]- This 53 inch vinyl cutter with maximum paper feed of 1350 mm (53.1 inch). Maximum cutting width: 1260 mm (49.6 inch).
  • [FLEXIBLE CUTTING] - Plotter machine cutter pressure: 10-500g. Cutting speed: 10-800 mm per second. Both adjustable.
  • [HUMANIZED DESIGN] - Backlight LCD display for easier handling the working process of sign cutting machine. Emergency stop/start function allows stop....
  • [4 ROLLERS] - 4 pinch-rollers on this vinyl cutter plotter machine can be adjusted on the guide rail according to different paper width.
  • [COMPATIBILITY] - Support DM/PL, HP/GL language. System: Pentium processor-based PC or compatible computer (Windows), Windows XP/Vista/7/8/10 (32&....
Check Stock

Herb Stripper, 10 holes and Brush Shape, Stainless Steel Leaf Remover Tool, Horse Head Kitchen Gadget, Include Clean Brush Set

  • 【HIGH-QUALITY STAINLESS STEEL MATERIAL】Our herb stripper is made of premium stainless steel, polished and smooth, easy to clean. Anti-rust, anti-corrosion, thick stainless steel, not easy to deform, can be used repeatedly. It is small in size, and is easy to store..
  • 【WIDE RANGE OF USE】The set contains 3 pieces herb cutter strippers. It is suitable for peeling and cutting herb leaves such as oregano, rosemary, thyme, tarragon, etc. It can also easily peel and cut vegetables such as kale..
  • 【9 HOLES DESIGN】9 holes sizes are suitable for most fresh or dried herbs. You only need to put the herb root stem into a hole of appropriate size, and then pull it through to easily peel off the leaves, which can effectively save you time..
  • 【2 IN 1 DESIGN】Leaf herb stripper can be used for peeling and cutting leaves. Its edges are sharp enough. It can chopped up dried and fresh leaves, and can even be used to cut dough and fruits, saving you time to change the cutter. A knife cover is included to prevent accidental injury..
  • 【WARM TIP】The edge is sharp. To ensure safety, please place herb stripper tool out of the reach of children..
Check Stock

ZENY DC Inverter Plasma Cutter 50AMP CUT-50 Dual Voltage 110-220V Cutting Machine

  • 【High Efficiency & Energy Saving】-- ZENY cutter machine by using inverter technical of switch power, stable and matureit greatly reduces the dimensions and weight of main transformer, energy saving 50%, as well as the efficiency is increased by 30%. Improved cooling method for the cutting torch.
  • greatly makes the cutting consumables more endurable..
  • 【 110V or 220V Dual Voltage】-- The ability of the dual voltage allows the plasma cutter to operate at 110V or 220V, with a power of 60HZ. The plasma cutter has the function to supply gas ahead and turn off gas delayed..
  • 【Compact Design & Widely Applications】-- This ZENY compact plasma cutter has a handle for portability. Easy taking.The net weight is 22.5LB. It is perfect for perfect for home DIY and general repairing work. Ideal for both home garages and workshops..
  • 【Specification for Cutter Machine】-- Voltage: 110/220V, 60HZ, 4.8KVA.
Check Stock

GPOAS Electric Rotary Fabric Cutter Cloth Cutting Machine 4 Inch Octagonal Blade Cloth Cutter Electric Scissors With Automatic Sharpener For Multi Layer Carpet Leather,Industrial Grade 110V

  • 【INDUSTRIAL GRADE FABRIC CUTTER】--- The cutting thickness of the cloth cutter is up to 27mm, over 1 inch, with octagonal blade, which is fast and cuts smoothly. can cut multi-layer cloth, approx 15 layers, The cutting is smooth and efficient, without any mess to fit the thickness of the material being cut..
  • 【MINI HAND-HELD CLOTH CUTTER】--- This fabric cutter is small in size, light weight, easy to carry, can be operate by one person easily, convenient and practical.
  • 【CUT IN DIFFERENT SHAPE】--- This electric cloth cutting machine can cut in straight line and curve shape, or you can draw the shape you need in advance with auxiliary tools such as ruler, tailor's chalk., then cut following it.
  • 【AUTOMATIC SHARPEN SYSTEM】 --- This rotary blade cloth cutter is equipped with auto grindstone ensures that you use the original Hercules blade for maximum life and cutting performance. Don’t need to remove the blade to sharpen, it is convenient, efficient and safer.
  • 【EXTENSIVE USAGE SCENARIO】---- This electric cloth cutting machine can cut multi-layer fabrics, cotton, sil....
Check Stock