Reviews Cutting Fluid For Aluminum

OXMUL Step Drill Bits for Metal, 1/8 to 1/2, Cobalt Bit, Heavy Duty for Stainless Steel,Metal, Aluminum, Wood, Copper, Wood, 13-Steps. #202

  • 【Heavy Duty for Stainless Steel】 The Cobalt Drill Bits(1.3243 STEEL) can drill 6X longer life and 2X faster. This Drill bits is heavy duty for Stainless Steel, Metal, Galvanized Steel, Aluminum,Iron, Wood, PVC and Copper. If you want to drill faster and many holes on metal, please choose this step drill bit.
  • 【Cobalt Bits】 Prefect for Stainless Steel/Metal Sheet/Wood/Plastic/Aluminum Sheet/Copper and other metal sheets. This Drill bit can successfully drill more and more holes easily into Stainless Steel plate like knife through butter!.
  • 【120-DAYS WARRANTY】 - If not satisfied, Any Reason, please contact us for 100% refund or replacement.
  • 【13 Steps︱2-Spiral-Flute︱1/4" Shank】 13-STEPS: 1/8,5/32,3/16,7/32,1/4,9/32,5/16,11/32,3/8,13/32,7/16,15/32 to 1/2 inches. 2-Spiral Flute:Clears Chips faster.
  • 【Cutting Fluid】 Cutting Fluid must be poured during work for longer life! Prohibit water-cooling to prevent!.
Check Stock

Hougen 11742 RotaMagic Metal Cutting Oil 10:1 mix Super Concentrated Cutting Fluid 1 Gallon

  • Use for any and all cutting operations on aluminum.
  • Ozone-friendly and completely free of 1,1,1 trichloroethane.
  • This Cutting Fluid Dissipates heat rapidly and provides closer tolerances.
  • Also highly effective on magnesium and other nonferrous metals.
Check Stock

M3 X 0.5 HSG D6 THREAD FORMING BOTTOM TAP HSS

  • Used with some cutting fluid or keep it wet when tapping, the tap will last longer..
  • Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron..
Check Stock

Audiopipe Black ATR series 600 watt max tweeter (each)

  • 350 Watt Aluminum Bullet Titanium Horn Tweeter – 1 Pair.
Check Stock

uxcell Thread Forming Tap M2 Thread 0.4 Pitch H2 HSS Titanium Coated

  • Used with some cutting fluid or keep it wet when tapping, the tap will last longer..
  • Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron..
Check Stock

uxcell Thread Forming Tap M6 Thread 1 Pitch H2 Tolerance Titanium High Speed Steel

  • Used with some cutting fluid or keep it wet when tapping, the tap will last longer..
  • Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron..
Check Stock

Loc-Line Coolant Hose Component, Acetal Copolymer, Straight Flow Nozzle, 1\ Width, 1/4\ Hose ID (Pack of 20)

  • Price For: Each Standards: - Cutting Fluid Sub-Category: Cutting Oils Fluid Type: Mobilcut 100 Flash Point: 354 Degrees F Item: Cutting Oil Size: 1 gal. Features: Emulsifies Easily, Contains Bactericide to Guard Against Odors, Pour Point -6 Degrees C Application: Water Mix Cutting and Grinding Fluid Suitable For Wide Range of Ferrous and Non-Ferrous Metalworking Operations Color: Yellow.
  • Specific Gravity: 1.0 Viscosity: 35 cSt @ 40 Degrees C Fragrance: Mild Odor Container Type: Can Country of Origin (subject to change): United States.
Check Stock

Tap Magic 30004P ProTap Cutting Fluid, 4 oz. Size

  • Use for drilling, tapping, milling - any cut on any metal when a biodegradable cutting fluid is called for in your environment.
  • Highly effective for hard metals such as stainless steel. Will not stain or change the properties of even soft metals such as aluminum.
  • Dissipates heat rapidly and provides closer tolerances.
  • Yields an ultra-fine finish and promotes longer tool life.
Check Stock

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

Jancy Slugger by Fein - Water Soluable Cutting Fluid for Annular Cutters - 1 Gallon - 64298102080

  • Outstanding Performance - It helps improve the life of your Slugger cutters with this easy to use cutting fluid..
  • Industry Made - It is a water-based cutting fluid that is designed to be used with Slugger cutters to improve the life of a cutter and provide users with exceptional results..
  • Specifications - Specially designed packaging with a sight window ensures proper mixing ratios..
  • INCLUDES - 1 Gallon of Fein Water Soluable Cutting Fluid.
  • Made in USA - Thanks to made in the USA manufacturing in Davenport, IA, Slugger Cutters are recognized for the brand name that says quality..
Check Stock

Audiopipe Super High Frequency Mini-Tweeters

  • 350 Watt Aluminum Bullet Titanium Horn Tweeter – 2 Pairs.
Check Stock