Reviews Cutting Depth Boring Bars

CHAMDRILLHEAD DRILLING HOLDER .748 TO .783 RANGE, .748 SHANK

  • 13PCS 2" boring head set w/ R8 shank kit includes 9pcs 1/2" boring bars, 1pc R8 handle and 3pcs hex wrenches, all packaged in a solid box for easy storage and carry..
  • 2 Inch boring head with R8 shank, these tools are made of high quality steel with great match of hardness and toughness. Hard and durable for long lasting and trouble free use..
  • Center Distance bt 2 bottom hole: 0.60"..
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting. Perfect for milling machines..
  • Used for processing inner hole surfaces, boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cutting hole and outer ring groove, etc..
Check Stock

3PCS S08K/S10K/S12M- SDUCR07 95 Degree Internal Turning Boring Bar with 10pcs DCMT21.51 DCMT070204 Carbide Turning Inserts for Machining Steel Parts and Stainless Steel Three Holder Set With Inserts

  • ☞Material : DCMT2(1.5)1 carbide Inserts with CVD coating ,55 degree diamond turning inserts ，used for machining stainless steel and steel parts.
  • ☞About the Internal Boring bars: 40Cr common steel with forging process , strong and durable ,95 degree right hand internal turning holder. Screw compression,easy to install and remove.
  • ☞Advantage: Offer long life and faster cutting speed, low friction coefficient, good wear resistance Designed for Steel, cast iron and non-ferrous materials.
  • ☞Application: The Minimum processing aperture is 3-5mm of the boring bar head diameter. Used for turning and finishing on a wide range of materials..
  • ☞Package includes: 3pcs Turning Boring Bars (S08K-SDUCR07 + S10K-SDUCR07 +S12M-SDUCR07 ) + 10pcs DCMT070204 Gold Carbide inserts + 3PCS T8 Wrenches.
Check Stock

Freud DHS17SPL Bi-Metal Plumbing Set (17 Piece)

  • Variable tooth design delivers faster and easier boring.
  • Snap-lock plus system enables a quick change for entire range.
  • 2-3/8-inch vs. 1-5/8-inch cutting depth for one pass and increased productivity.
  • One mandrel (arbor) fits all Diablo hole saws from 9/16-inch to 6-inch diameter.
Check Stock

35mm Concealed Hinge Drilling Jig Hinge Jig Hole Forstner Guide Bit Boring Jig Hole Cutter Guide for Cabinet Hinges and Mounting Plates Woodworking DIY Tools

  • 【High Quality】The bore bit adopts superhard alloy that makes the cutting sharper ,chip removal unhindered with outstanding boring ability and excellent boring performance.
  • 【Concealed Hinge Boring Jig】Features a "V"-locator that works off of a center reference line and quickly locates drill center points for all brands of hinges and mounting plates..
  • 【Adjustable Hinge Hole】Bore diameter is 35mm. Special removeable depth stop design makes drill easier..
  • 【Easy to Use】Easily and conveniently dip cup hole on the wardrobe door or desk by yourself with the hinge drilling jig,Suitable for their own home operation,Even you are not professionals, you can quickly locates drill center points for hinges and mounting plates..
  • 【Wide Application】Working efficiently for various timber, plywood, veneer work, and the drill bit is suitable for drill press, pistol drill, bench drill, vertical drilling machine and so on..
Check Stock

FREUD AMERICA INC. 265-DHS16SEL 16pc Bi-Metal Hole Saw

  • Variable tooth design delivers faster and easier boring.
  • Snap-lock plus system enables a quick change for entire range.
  • 2-3/8-inch vs. 1-5/8-inch cutting depth for one pass and increased productivity.
  • One mandrel (arbor) fits all Diablo hole saws from 9/16-inch to 6-inch diameter.
Check Stock

2\ Boring Head SET 12 Pcs Carbide Boring Bars MT2 -M10 F1-12 50mm Boring Head With 9pcs 12mm Boring Bars Milling Machine Accessories

  • This tool set is made of high quality material, good wear resistance, and durable in use.
  • The product is the main accessories of boring and CNC milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring..
  • It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing..
  • This tool set contains boring head,Boring Bars, perfect for the milling machine.
Check Stock

TTC 1/4\ C HSS Keyway Broach w/Shim

  • Specialty tools designed for cutting keyways in machined holes..
  • Typically used manually with an arbor press or hydraulic press to produce the keyways..
  • Well suited for use in a variety of ferrous and non-ferrous materials..
  • Hardened and ground bars with cutting teeth on one side..
  • Broach is tapered, allowing teeth to cut keyway to proper depth..
Check Stock

Amana Tool 203351 Carbide Tipped Hinge Boring Drill Bit 35mm Dia x 57mm Long x 10mm Right Hand

  • HINGE BORING BIT – The Amana Tool Carbide Tipped Hinge Boring Bit allows you to bore a recess into your workpiece for cup hinges to be installed..
  • DESIGNED FOR – Boring machine bit (10mm shank) and boring drill bit presses (3/8" shank)..
  • DRILL CLEAN HOLES – Use the boring drill bits for wood and boring drill bits for metalworking, they provide clean and accurate hole cutting every time..
  • PERFECT SIZE – The hinge drill bit features sharp, fine blades for perfect drilling each time. (D) diameter: Boring bit 35 mm. Overall length (L): 57mm. Rotation: right hand..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

Amana Tool 203202 Carbide Tipped Hinge Boring Drill Bit 20mm Dia x 70mm Long x 10mm Shank Right Hand

  • HINGE BORING BIT – The Amana Tool Carbide Tipped Hinge Boring Bit allows you to bore a recess into your workpiece for cup hinges to be installed.
  • DESIGNED FOR – Boring machine bit (10mm shank) and boring drill bit presses (3/8" shank)..
  • DRILL CLEAN HOLES – Use the boring drill bits for wood and boring drill bits for metalworking, they provide clean and accurate hole cutting every time..
  • PERFECT SIZE – The hinge drill bit features sharp, fine blades for perfect drilling each time. (D) diameter: Boring bit 20 mm. Overall length (L): 70mm. Rotation: right hand..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

VeYocilk Lathe Threading Carbide Inserts:10 Pcs 11IR A60 1/4 Carbide Inserts for Internal Threading Holders CNC Cutting CNC Turning Tool

  • High Efficiency: This turning tool holders kit for semi-finishing and finishing operations, can reduce the tool grinding cost and improve the cutting efficiency..
  • High Performance: Made of carbide and the coating material is TIN, it can be used for processing steel, the inserts has high hardness, low friction coefficient, good wear resistance and strong impact resistance..
  • Threading Boring Bars: The material of the boring bar is 40Cr steel, widely use, tightly impacted bolt, simple structure, often used for small hole machining..
  • Package Includes: 1PC SNR0008K11 + 1PC SNR0010K11 + 1PC SNR0012M11 turning tools + 3PCS 11IR A60 turning inserts + 3PCS T8 wrench..
  • Best Service: The carbide inserts and turning tools holder are packed in plastic containers, which is safe and easy to store. Any more question about this item, please feel free to email us..
Check Stock

NEW 9 pcs 1/2

  • 9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel. Shank Diameter- 1/2".
  • Contains: (3) pcs. 5/16" minimum bore (1 ea. 3/4" bore depth x 2-1/4" overall, 1 ea. 1-1/8" x 2-5/8", & 1 ea. 1-1/2" x 3").
  • Contains: (3) pcs. 7/16" minimum bore (1 ea. 1-1/8" bore depth x 2-5/8" overall, 1 ea. 1-11/16" x 3-3/16", & 1 ea. 2-1/4" x 3-3/4"), (3) pcs. 9/16" minimum bore (1 ea. 1-1/2" bore depth x 3" overall, 1 ea. 2-1/4" x 3-3/4", & 1 ea. 3" x 4-1/2").
Check Stock

iCarbide R8 Boring Head and 1/2 Shank Boring Bar 6pcs Set Inserts Included 1/2 - 4

  • Inserts included TBGT 06 ,TPGT 09 ,TPCT1103.
Check Stock

4 PC 1/2\ Shank Indexable Boring Bar Set Free TCMT Insert

  • Inserts included TBGT 06 ,TPGT 09 ,TPCT1103.
Check Stock