Reviews Cutting Burrs Single Cut

aTourer Tungsten Carbide Burr Set Rotary File Rasp 1/8 & 1/4 Cutting Head Die Grinder Milling Bit 20pcs Single Burr Double Cut 20pcs

  • ...sharp and sturdy. And the hardness can reach to HRC70. The durability of carbide burr is 10 times higher than high speed steel cutter (HSS cutter). 200 times more than the small wheel durability. Comprehensive processing costs can be reduced by about 10 times..
  • 【Double Cut or Single Cut】Double cut burr have more cutting edges and could remove material much faster. It is more suitable for relatively low density materials such as wood, plastic, aluminum, soft steel and all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed being too slow. However, it's ideal to start the cutting slow, increasing the speed as ....
Check Stock

TJATSE 5Pcs 1/4 Inch Aluma Cut Carbide Burr Set 4.4 Long Shank Single Cut Tungsten Rotary Burr Files CNC Engraving Cut Metal Carving Polishing Drilling Tool Kits

  • ...This set included 5pcs NF carbide rotary burr, standard aluma cut head with 1/4" shank, 3/8" head diameter, 3/4" flute length, 4.4” total length. NF Carbide Burrs are designed for use on aluminum, non-ferrous metals, soft steel, reinforced plastics and other soft materials..
  • 【SINGLE CUT EDGE DESIGN】:The single cutting edge design provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. Using a double cut burr on aluminum will just gum it up, heat it up, and end up pissing you off..
  • 【EXTENDED LONG SHANK】: In the grinding process, the special extension long handle design is great for hard to reach areas of porting and reduced operator fatigue due to high performance applications..
  • 【ADVANCES TUNSTEN MATERIAL】:100% raw virgin tungsten carbide burrs that the service life is very long, 10 times higher than the durability of other HSS cutter and 200 times more than the small wheel durability. Hardness can reach to HRC70, sharp and sturdy..
  • 【TJATSE BRAND WARRANTY】: Packed with an great tool carry case for safety storage and protection. TJATSE provides an one-year no questions asked replacement warranty and friendly customer service. We aim to provide solutions for ....
Check Stock

Forum Novelties Goatee/Hip-Hop/Rap Star Moustache and Beard Set

  • Cuts straight and slight curves with yellow handles for quick identification.
  • Ergonomic, single handed latch operation for left or right handed use.
  • Precision cast molybdenum blades with conk ground edges and serrations for cutting low carbon, cold rolled 18 gauge steel.
  • Blade serrations spread cutting force across jaws improving cut quality and tool life.
  • Superior Design prevents tears at end of cuts by controlling blade bypass and minimizes folding and burrs.
Check Stock

Carbide Burr Set, Tinpec Double Cut Cutting Burrs with 1/8\ Shank & 1/4\ Head, Tungsten Steel Die Grinder Bits for Woodworking, Drilling, Metal Carving, Engraving & Polishing – 10PCS

  • ✔【DIE GRINDER Cutting Burrs】: Carbide burrs casted from Tungsten Steel with amazing HRA003e85. Cutting Burr Demensions: Length:45-50mm, Diameter 1/4'', Shank Length 35mm, Shank Diameter 1/8''..
  • ✔【SHARP DOUBLE CUT】: With grooves evenly crossed, Tinpec double cut cutting burrs are 2x sharper and faster, perfect for all materials like wood, plastic, steel, stone, ceramic and aluminum..
  • ✔【1/8” Shank】: With widely adopted 1/8” shank, Tinpec carbide burrs are compatible with most handheld electric or air powered tools, also in machine tools. Fast and smooth centering with the three jaw chuck..
  • ✔【LONG SERVICE LIFE】: Thanks to our hardened Tungsten Steel and superb tech, Tinpec die grinder bits are 10x more lasting than high-speed steel and 200x than grinding wheel..
  • ✔【PROJECT HELPER】A clear storage case comes with the carbide burr set for easier storage and access. A smart choice for your DIY, engraving, polishing, woodworking and carving projects..
Check Stock

Cut Off Wheels and 1 Mandrel Kit, 20Pcs 3” x 1/16” x 3/8” Thin Cutting Discs with 1 Mandrel for Die Grinder

  • 【Material】The cutting wheel is made of Proprietary aluminum oxide grain combination ensures durable long wheel life and fast bur-free cutting.
  • The mandrel is made of A3 carbon steel with black plating, durable..
  • 【Function】The ultra-thin cutting wheel can achieve precise and fast cutting, while reducing burrs and material waste, minimal burrs and material waste. 3/8" & 1/4'' Mandrel are designed to fit mini cut-off wheels..
  • Perfect for General Purpose metalworking: Stainless Steel, Sheet Metal, Ferrous & Non-ferrous Metal, Cast Iron, Angle Iron, Rebar, Aluminium and Copper Cutting..
  • 【Fit for Tools】The Cut-off wheel mandrel with 1/4” Shaft, for most die grinder, air tools and drill rotary tools. Pay attention to connector size, easy to mount and demount. It's a great essential die grinder accessory..
  • 【Package】20pcs 3-inch Cut-Off Wheels + 1pc Adaptor kit.
Check Stock

Crescent Wiss 9-3/4 Inch MetalMaster Compound Action Snips - Straight, Left and Right Cut - M3R

  • Cuts straight and slight curves with yellow handles for quick identification.
  • Precision cast molybdenum blades with conk ground edges and serrations for cutting low carbon, cold rolled 18 gauge steel.
  • Blade serrations spread cutting force across jaws improving cut quality and tool life.
  • Superior Design prevents tears at end of cuts by controlling blade bypass and minimizes folding and burrs.
  • Ergonomic, single handed latch operation for left or right handed use.
  • Free float design on the pivot bolt provides longer life.
  • Handles have built in stops providing consistent operation and blade opening.
  • Ergonomic, single material non slip handle grips provide excellent control and easy cleaning with built in hang hole for convenient storage.
  • Designed, engineered, and manufactured in the USA.
Check Stock

Benchmark Abrasives 6” Flame Shape Tungsten Carbide Double Cut Rotary Burr 1/4 Shaft for Metalwork Woodworking Deburring Shaping Carving on Fiberglass Plastic Copper SH-5

  • Benchmark Abrasives carbide burrs with 1/4" shaft is ideal for woodworking, drilling, metal carving, engraving, medium stock removal, deburring, finishing, and cleaning, etc..
  • These carbide burrs are made of tungsten carbide. Double-cut burrs will leave a slightly smoother finish than single-cut due to producing smaller chips as they cut away the material..
  • The double-cut carbide rotary burrs are suitable to use with die grinders and hand-held pneumatic grinders. A double-cut carbide burr is the most popular cut and will see you through most applications..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

uxcell Tungsten Carbide Rotary Files 1/4 Shank Single Cut Flame Shape Rotary Burrs Tool 10mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing Model Engineering

  • Specifications: Shank diameter: 6mm(1/4"), cutting edge diameter: 10mm(2/5"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Cylindrical Radius End Rotary Burrs Tool 3mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing 2pcs

  • Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 3mm(1/8"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Inverted Cone Shape Rotary Burrs Tool 6mm Dia for Die Grinder Drill Alloy Steel Hard Metal Carving Polishing Engraving 2pcs

  • Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Inverted Cone Rotary Burrs Tool 6mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing Drilling 3pcs

  • Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Top Flat Cylinder Rotary Tool 6mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Polishing Model Engineering 3pcs

  • Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Flame Rotary Burrs Tool 6mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing Model Engineering 3pcs

  • Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock