Reviews Cutter Tools

ABN Tile & Mosaic Nipper, Cutter Pliers with Carbide Trimming Tips

  • [Fit for Your Tool Kit]: When you need to trim and cut porcelain or tile, depend on the ABN Tile Cutter Hand Tool Ceramic tile Cutter.
  • Use this Manual tile cutter porcelain tile cutter when working on flooring, walls, mosaics, and more.
  • [For Your Project]: Tile cutting tools ceramic cutter allows you to make quick and easy cuts.
  • Use tile cutter tools when it comes to irregular cuts for customizations in tile or stonework.
  • [Built to Last]: Tile manual cutter constructed of chrome vanadium for strength and longevity.
  • No need to worry about tile cutter hand tool ceramic hand tile cutter breaking or bending under the pressure.
  • [Comfort Grip]: Tile cutter includes soft rubber coated handle grips.
  • Tile hand cutter wall tile cutter handle ensures control while in use so that there will be no slips while in use.
  • Handles measure 8 inches (20cm) in length.
  • [Measurements]: The sharp, straight carbide-tipped ends of the manual ceramic cutter have a cutting surface of over 3/4 inches (1.9cm) for tile.
  • Ceramic tile cutter tools spans up to 1/2 inches (1.27cm)....
Check Stock

YLYL 19 Pcs Glass Bottle Cutter & Glass Cutter Kit DIY Tools Glass Cutter for Bottles Upgraded Wine Bottle Cutters for Cutting Round Bottles with Glass Cutter Gloves Sanding Paper Hemp Rope etc

  • GLASS CUTTER FOR BOTTLES 19 PIECE SET: You will receive glass bottle cutter & glass cutter kit diy tools: 1 glass cutter for bottles + 2 spare cutting....
  • EASY TO USE: Our wine bottle cutters for cutting has been tested, use our glass bottle cutter & glass cutter kit diy tools, whether you are a pro....
  • MULTIPURPOSE USE AND ENVIRONMENTAL PROTECTION: You can use our glass bottle cutter & glass cutter kit diy tools to make various crafts, turn used wine....
  • WIDELY APPLICABLE: Wine bottle cutters for cutting is equipped with an adjustable cutting head, by coupling with the track-system and adjustable....
  • 100% SATISFACTION GUARANTEED:Our team is committed to providing every customer with goodglass bottle cutter & glass cutter kit diy tools and 100%....
Check Stock

Urbansential Woodturning Bowl Gouge Set, 3 Pieces 22.5 inch Wood Lathe Turning Tools, 1/4 Flute, 3/8 and 1/2 with High Speed Steel Blades, Beech Handles Brass Ferrules, in Wooden Storage Case

  • ...bide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head..
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter..
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly..
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the end to the stainless steel ferrule. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss..
  • Set includes the Large Round (# 7537), Square (# 7538) and Diamond (# 7539) cutter tools. The round tool measures appx. 6-9....
Check Stock

Hot Knife Rope Cutter for Heated Nylon Strap Cutting Marine Grade Lines Heat and Sealing Tool

  • What you will receive: the package comes with 1 kit of electric hot cutter handle tools, which includes 1 piece of heat cutter multipurpose stencil cutter, 16 pieces of blades accessories, 1 piece of metal stand and 4 pieces of blade holders, 22 pieces in total, the proper combination and quantity for you to meet your daily needs.
  • Durable material: our electric hot knife cutter tools are mainly made of metal material, and the handle of hot knife cutter is made of plastic, it is comfortable to hold, and the metal stand is made of metal material, these tools are durable, reliable and reusable, you can use them for a long time.
  • Various shapes of blades: our package contains 16 pieces of blades with 8 different shapes, each shape has 2 pieces, they can be replaced according to your different requirements of different work, so as to cut various shapes and satisfy diverse working situations.
  • Practical tools: this heat cutter multipurpose stencil cutter is designed with a mechanism of cooling system that prevents the handle from heating, although the nozzles being heated to 212 Fahrenheit degree/ 100 Celsius degree.
  • It has built in air cooling device, continuous heat dissipation.
  • Multiple application: our electric hot cutter handle has a wide range of appl....
Check Stock

co2CREA Hard Case replacement for WORX WX081L 4V ZipSnip Cordless Electric Scissors

  • co2CREA hard travel case replacement for WORX WX081L 4V ZipSnip WORX tools cordless electric scissors. Hard EVA shell case is shockproof dustproof and....
  • This protection case perfect for your WORX WX081L cardboard cutter mens tools and gadgets cutting tool and has more space to accommodate the cordless....
  • co2CREA hard work tools electric cutter electric box cutter case is a build-in super quality lining reflects superior taste and ensures a long-lasting....
  • This cordless scissors small tools and gadgets case has a comfortable hand strap, so that the WORX zipsnip cutting tool electric cutter new home must....
  • For sale is CASE ONLY! (WORX zipsnip cutting tool electric cutter and cordless scissors accessories are not included).
Check Stock

General Tools RW122 Replacement Cutter Wheel for Larger Capacity Cutters

  • The General Tools and Instruments RW122 gold standard tubing cutter wheel is the new quality standard replacement cutter for General Tools tubing cutters.
  • General Tool's gold standard cutting wheels are made from tempered, bearing tool steel for smooth, exact pipe cuts.
  • The slim-line surface geometry ensures fewer inner surfaces burrs and less chance for outer surface distortion.
  • The RW122 replacement cutter wheel is designed for larger capacity cutters on iron pipes, PVC pipes, and other tough surfaces.
  • This cutter wheel fits General Tools Model # 120, # 125, and #126.
  • The combination of shape, strength, and durability enable these cutter wheels to repeatedly provide quicker cutting without deforming the pipe's outer diameter and cuts with minimum inner diameter burning.
Check Stock

Glass Cutter Tool Mirror Cutting Tool with 2-6 mm, 5-12 mm, 12-20 mm Glass Cutter Head and Screwdriver Oil Dropper Glove for Glass Tiles Mirror Cutting

  • Warm tip: Different cutter heads correspond to the corresponding glass thickness, please check your glass thickness before buying and choose the right product. The package include 2 pieces glass cutter handle in 2 different colors, 2 pieces 2 mm-6 mm cutter head, 2 pieces 5 mm-12 mm cutter head and 2 pieces 12 mm-20 mm cutter head, the screwdriver, oil dropper and 1 pair of gloves are also included for you.
  • Non-slip design: our glass cutter tool has non-slip handle design, the cutter is threaded to ensure slip resistant, so it can give you a comfortable holding experience and save your time and energy, bring you convenience with our tools.
  • Sturdy material: the glass cutter handle is made of aluminum alloy and the cutter wheel is made of strong alloy steel, which is hard to break and provide you a smooth operation, it's great for you to cut straight and clean lines and curves.
  • Replaceable cuter head: there are 360 degrees rotatable glass cutter head for you, the different size of cutter head can help you to fit for various needs.
  • You can add some kerosene into the cutting tool with oil dropper to make the cutter head more smoother.
  • Practical tools: these helpful tools are suitable for cutting stained glass and other craft and household uses, you can also ....
Check Stock

Easy Wood Tools Full-Size Easy Finisher (4200) Woodturning Tool with Round Cutter Scraper Chisel with Replaceable Carbide Insert

  • Ergonomic Hardwood Maple Handle: 18" Maple / Tool Bar: 1/2" x 8.5" / Overall length 24.5" / Max Reach: 4". Comes Mounted with a Ci0 Carbide Cutter.
  • Never sharpen again! When cutter dulls, loosen screw, turn cutter 1/4 turn for new sharp edge, tighten screw down and start turning! . Stays sharp many times longer than steel.
  • Optional Cutter Available: Ci0-NR Patented Negative Rake Round Carbide Replacement Cutter. Negative Rake Carbide Cutters are AWESOME for turning resins, acrylics and extreme hardwoods.
  • Easy Wood Tools have a lower cost of ownership due to all you need is a lathe and Easy Wood Tools.
  • no need to purchase expensive re-sharpening equipment, plus our tools will not get shorter like high-speed steel which will eventually need replacing. Our tools are also safer due to turning on centerline = no catches..
  • Designed and Manufactured 100% in the USA.
Check Stock

22 Pieces Electric Hot Knife Cutter Tool Kit Include Heat Cutter Multipurpose Stencil Cutter, 16 Blades, 4 Blade Holders, Metal Stand Hot Carving Knife for Carving Soft Thin Styrofoam Cloth Stencil

  • What you will receive: the package comes with 1 kit of electric hot cutter handle tools, which includes 1 piece of heat cutter multipurpose stencil cutter, 16 pieces of blades accessories, 1 piece of metal stand and 4 pieces of blade holders, 22 pieces in total, the proper combination and quantity for you to meet your daily needs.
  • Durable material: our electric hot knife cutter tools are mainly made of metal material, and the handle of hot knife cutter is made of plastic, it is comfortable to hold, and the metal stand is made of metal material, these tools are durable, reliable and reusable, you can use them for a long time.
  • Various shapes of blades: our package contains 16 pieces of blades with 8 different shapes, each shape has 2 pieces, they can be replaced according to your different requirements of different work, so as to cut various shapes and satisfy diverse working situations.
  • Practical tools: this heat cutter multipurpose stencil cutter is designed with a mechanism of cooling system that prevents the handle from heating, although the nozzles being heated to 212 Fahrenheit degree/ 100 Celsius degree.
  • It has built in air cooling device, continuous heat dissipation.
  • Multiple application: our electric hot cutter handle has a wide range of appl....
Check Stock

Pro Grind Sharpening System For Lathe Turning Tools, Chisels, Skews, Gouges, Bowl Gouges, Spindle Gouges and More. Includes the Multi-Grind Jig for Gouges, Slotted Platform and Tool Rest

  • ...ve the tool at just the right angle when turning, the results can be undesirable. With the Savannah Carbide Mini Turning Tool Set you can eliminate the inconvenience of sharpening your turning tools and with the flat bottom bars on each tool you’ll be able to easily turn most any type of project!.
  • When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting edge. Carbide cutters will stay sharper longer when compared to standard turning tools. However, once needed, the cutters are replaceable. This set includes 2 of each cutter style and extra screws..
  • Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a shearing action as opposed to the traditional cutting method of standard turning tools. The shearing action of this type of turning produces much cleaner cuts and is easier than using standard turning tools..
  • Each mini turning tool has a Flush Fit Comfort Grip handle. Each handle is approx. 9-1/8" long and has a heavy duty steel ferrule for added strength and support. The steel ferrule is riveted to the handle. Each turning tool steel bar is approx. 3¾” long. The s....
Check Stock

General Tools RW121/2 Replacement Cutter Wheels Set of 2

  • The General Tools and Instruments RW121/2 gold standard tubing cutter wheel is the new quality standard replacement cutter for General Tools tubing....
  • General Tool's gold standard cutting wheels are made from tempered, bearing tool steel for smooth, exact pipe cuts.
  • The slim-line surface geometry ensures fewer inner surfaces burrs and less chance for outer surface distortion.
  • The RW121/2 replacement cutter wheel is designed to fit all General Tools tubing cutters, Pro or Classic series.
  • The combination of shape, strength, and durability enable these cutter wheels to repeatedly provide quicker cutting without deforming the pipe's outer....
Check Stock

Caydo 8 Pieces Leather Tools Craft Half-Round Cutter Punch for Crafting Strap Belt, Wallet and Bag, 5-40 mm

  • Easy to use: You only need to hammer Half-round cutter punch for beautify end of belt.
  • Tools of different sizes: Half-round cutter punches of 8 sizes can meet your belt of various sizes for crafting.
  • Durable tools: The half-round cutter punches are made of steel.
  • Wide application: They are used for end of belt, corners of bag and leather crafting.
  • Great tools: The edge of cutter punches are sharp.
Check Stock

Pastry Cutter Set, EAGMAK Pastry Scraper and Dough Blender, Stainless Steel Dough Cutter Scraper Blender Set, Professional Heavy Duty Baking Dough Tools for Home Kitchen - Black

  • Professional Baking Dough Tools: This pastry cutter set includes pastry scraper, dough blender, biscuit cutter, egg separator and pastry brush 5pcs utility tools. The pastry scraper can help you combine the wet and dry ingredients quickly while the dough blender can help you cut bread dough, clean the counters of crumb etc, making your bake more easier, maybe you’ll love baking for these tools!.
  • Heavy Duty Stainless Steel: 5 baking tools are all made of food grade stainless steel, durable, sturdy and easy to clean, you don’t worry about that this pastry cutter set will bend, rust, it’s healthier for you and your family. Besides, the rubber non-slip handle of the dough cutter and pastry scraper are comfortable to hold, you don't have to worry about hand and wrist fatigue..
  • Bonus Round Biscuit Cutter: This biscuit cutter set with 5 different sizes, all ranging in diameters from 1.8 inches to 3.2 inches to meet your different needs. With a detachable buckle, convenient for you to storage, perfect for creating beautiful cookies, donuts, round sandwich, delicious crumpets, mini cakes, tarts and so on..
  • Egg Separator & Pastry Brush: Simple and easy egg separator quickly separate egg yolks and egg whites directly into a bowl in 3 seconds, help you save t....
Check Stock