Reviews Cutter Bender

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

Bonvoisin Tubing Bender Kit 3/8 -7/8 Ratchet Copper Pipe Bender Tool Set 90° Bend with 5 Dies for Refrigerator Air Conditioner Repair

  • [Parameters] - Applicable pipe outer diameter: Φ10/12/16/19/22mm (3/8'', 1/2'', 5/8'', 3/4'', 7/8'').
  • applicable pipe wall thickness: 0.6 ~ 2mm.
  • [High Efficiency] - This pipe bender can be operated with one hand. You can save time and effort and improve work efficiency..
  • [Compact & Portable] - The tube bender kit has a compact design, making it easy to work in tight spaces. Besides, with a storage case, it's convenient....
  • [Complete Accessories] - This hvac tool set includes a pipe bender, a pipe cutter, a deburring knife, bending groove * 2 and dies * 5..
  • [Wide Application] - This tubing bender is applicable for air conditioners, refrigerators, automobiles, heating, hydraulic and pneumatic systems, etc..
Check Stock

Yaheeda Tube Bender Kit,90 Degree with Reverse Bender for Copper Aluminum Soft Steel Brass 1/4” to 7/8”, HVAC Refrigeration Industry Maintenance,Containing Tube Cutter & Deburrer

  • Our manual tube bender has a compact structure, which allows it to function normally even in limited spaces. The body is made of alloy aluminum, durable and light weight, can finish the bending tasks easily. Beside the tube bender, tube cutter and durring tool are also in the package, get multiple tools in one purchase..
  • This tube bender is not hard to assemble, there is an illustrated guidance of assembly and how-to-use in the package. No more screws or nuts means no worry about losing accessories. Assembly is easy, and using is even more easier, labor-saving and time-saving, can improve the working efficency vastly..
  • The maximum bend angle of this tube bender is 90°obversely and reversely. In the situation like facing wall or corner that obverse bending is not convenient, you can use the reverse bending mode to finish task without problem..
  • The tube bender is widely applicable for pipes at different O.D.s:1/4",5/16",3/8",1/2",5/8",3/4",7/8"(6mm,8mm,10mm,12mm,16mm,19mm,22mm).There are replacable bender heads in the package with percise size all made of alloy aluminium, durable and easy to use..
  • Our tube bender is compatible with copper,aluminium,thin steel pipes,widely useful in sanitation,HVAC,radiant floor heating,refrigeration AC system and hydruali....
Check Stock

Tube Bender Kit Refrigeration Ratcheting Tubing benders Hand Tool 1/4 to 7/8 Inch Aluminium Alloy Replacement Head

  • Elbow tubing diameter range: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8 inch (6,8,10,12,16,19,22mm) O.D..
  • Easy to use: With a deburring tool for cleaning tubing, quick change bending mandrels and heads..
  • Complete ratchet hand bend kit: Aluminium alloy bender heads, uneasy to damage, solid and durable, prevent pipe deformation. Professional tool for commercial or occasional use..
  • Applications: sanitary and heating installations, floor heating, refrigeration and air-conditioning, hydraulic systems..
  • Package Include: 1x Tube Bender, 1x Pipe Cutter, 1x Deburring Tool With Extra Blade, 2x Fixed Supports, 7x Tube Bender Heads, 1x Carrying Box..
Check Stock

7 Size Pipe Threader Threading 3/8 to 2 Die Dies Set w/ Handle Ratchet

  • 7 exchangeable tube bender aluminum former: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8".
  • The package include with a pipe cutter that with spare blade.
  • The tubing bender is a professional tool for commercial or occasional use to change bending mandrels quickly..
Check Stock

3 in 1 Tube Bender - Yellow Jacket 60390

  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
  • EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
  • ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
  • INCLUDED COMPONENTS: Bender body, crossbar, reverse bending attachment and mandrels for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7"8 tubing.
  • 【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe Cutter, 2 x Flip Arm, 1 x Trimmer..
Check Stock

VEVOR 1.5KW Electric Rebar Bender, 1''(25mm) Hydraulic Electric Hand Held Rebar Bender & Happybuy Electric Rebar Cutter, 1.7KW 110V Electric Hydraulic Rebar Cutter

  • ...ressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position..
  • Product 2: Super-Fast Cutting Speed: The electric hydraulic rebar cutter cuts rebar within 3-5.5 seconds without sparks and sentiments. Cutting capacity ranges from 3/20" (4 mm) #3 to 1" (25 mm) #8 Grade 60. It satisfies your various cutting demand. Cut rebar types: medium carbon rebar, low carbon rebar, round rebar, screw thread steel, etc..
  • Product 2: Pure Copper Coil Motor: 1700W pure copper coils motor, driven by a hydraulic pump to ensure that the electric rebar cutter has higher reliability and excellent motivation yet low noise. The motor runs more smoothly to achieve a minimum friction and power consumption..
  • Product 2: High-quality Steel Blade: We utilize upgraded steel blades that would not deform easily and serve you longer with sophisticated blade processing technology and strict quality control. And multiple screw fixed head offers quick and accurate cutting while providing additional stability and sealability..
  • Product 2: Adjustable Bolt Design: An adjustable bolt on the portable rebar cutter ....
Check Stock

Tubing Bender Pipe Bender Hvac tools - Tube Bender Kit with Reverse Bending 1/4 to 7/8 Inch Used in Hydraulic Systems Automobile and Refrigerator maintenance Hvac work

  • Satisfactory Service: We provides THREE-YEAR FACTORY WARRANTY. Suitable Tube Size: 1/4“, 5/16“, 3/8“, 1/2”, 5/8“, 3/4“, 7/8”, the....
  • Made of 40CR steel and 45# steel. Suitable for bending annealed metal materials or PVC pipes, such as thin-walled steel pipes (thickness.
  • With pipe cutter, suitable for cutting heavy and hard materials, such as thin stainless steel (thickness.
  • Application: automobile maintenance, refrigerator maintenance, Hvac work, hydraulic system, etc..
  • Package Include: Tubing Bender x 1, Fixed Supports x 2, Tube Bender Heads x 7, Reverse Bending Tool x 1, Pipe Cutter x 1, Deburring Tool x 1, Carrying....
Check Stock

Gardner Bender GS-45 Wire Stripper, Slim Nose, 24-12 AWG

  • Slim Nose Economy Wire Cutter & Stripper.
Check Stock

Crescent CMTS4 Switchblade Multi-Purpose Cutter

  • Multi-purpose blade for cutting rope, shingles, vinyl tiles/siding, plastics - also includes a bottle opener, wire cutter and bender.
  • Straight cutting blade for metal ducting, aluminum siding, gutters.
  • Cable cutting blade for cutting wires, wire cable.
  • Standard plier head with large and small gripping teeth and integrated wire cutter.
  • Compound action design for more power with less effort.
  • Quick change interchangeable blades for easy operation.
Check Stock

IBOSAD Reverse HVAC Refrigeration Ratchet Manual Compact Copper Tube Bender & Pipe cutter Copper Pipe Tubing Set with Bending 3/4 7/8 3/4 1/2 5/8 1/4 5/16

  • 7 exchangeable tube bender aluminum former: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8".
  • The package include with a pipe cutter that with spare blade.
  • The tubing bender is a professional tool for commercial or occasional use to change bending mandrels quickly..
Check Stock

Voilamart 14 Piece Bonsai Tools Kit with Case, Carbon Steel Scissor Cutter Shear Set Garden Plant Tools

  • Complete 14PCS Bonsai Tools Set - including Leaf Trimmer, Bud Shear, Cutting Scissor, Concave Cutter, Knob Cutter, Wire Cutter, Root Cutter, Jin Pliers, Trunk Splitter, Root Hook, Rake with Spatula, Branch Bender, Hemp Broom, Wire, Nylon Tool Case.
  • Quality Made Construction - Made of carbon steel fully inspected, ther are sharp, durable and very handy, suitable for beginners or professionals.
  • Tool used for leaves trimming, loose the bonsai soil, precise and refined pruning the root, branches, twigs and bud etc..
  • Care Instruction - Remove dirt and debris with a dry cloth and lightly oil after every use..
  • A beautiful and practical tool set, comes with nylon case for convenience, an ideal gift for bonsai lover..
Check Stock