Reviews Cut Off Wheels For Stainless Steel

Cut Off Wheels 4-1/2 ,PRETEC 50+5 Pack Metal Cutting Wheel,Thin 4.5” Metal & Stainless Steel Fast Cutting Discs for Angle Grinder - 7/8 Arbor Hole

  • ...ically manufactured from corundum and white alundum grain that provides high hardness, durability and abrasion resistance,extend die grinder cut off wheel the service life..
  • 【Sharp & Clean Cutting】Cutting discs 0.04 inch ultra thin design for fast burr free and stable cutting. Make fast, clean cuts in steel, stainless and other ferrous metals with these abrasive cut-off wheels. Promot the heat dissipation of the cutting blade during work, avoid metal thermal burns. Performance with minimal material loss, make the cutting project more precise and efficient..
  • 【Professional Cutting Wheel】PRETEC Cutting wheels obtained CE,ISO certification.Help you better cut stainless steel, aluminum alloy, cast iron, carbon steel and general-purpose metal..
  • 【 Multiple Ueses】Cut off wheels 4 1/2 inch are designed for cutting steel, iron, plastic,fiberglass,stainless steel including rebar, steel pipe, sheet metal, structural tubing..
Check Stock

Makita 10 Pack - 4 Inch Cut Off Wheels For 4' Grinders - Aggressive Cutting For Metal & Stainless Steel

  • ✅ 10 MAKITA Premium 4” Flat Type 1 Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-Inch x .045-Inch x 5/8-Inch | Optimized for Makita 4 Inch Angle Grinders and compatible with All 4” Angle Grinders.
  • ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, ....
Check Stock

Makita 5 Pack - 4.5\ Cut Off Wheels For 4.5\ Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2\ x .045\ x 7/8-Inch

  • ✅ 5 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders.
  • ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION....
Check Stock

Ridgid R63015 Spiral Cutter, 1-1/4-Inch, Silver

  • ...3cb003ein both directions (right to left + left to right).003c/b003e -- Fits all Van Mark brakes and all Tapco PRO Series Brakes (1995 and after).
  • ✔ 1" OFFSET CUTS - Three cutting wheels make 003cb003eaccurate, clean and effortless003c/b003e cuts at 1" offset up yo 2 layers of aluminum coil stock or up to 24 gauge Stainless Steel..
  • ✔ STAYS ON THE BRAKE - With roller wheels, the 2-Way Cut-Off Tool is 003cb003eanchored to the brake's anvil.003c/b003e This allows it to travel the length of the brake to make a cut, and then later travel back the other way to make the next cut, while still attached to the brake..
  • ✔ TUCKS OUT OF THE WAY - This siding bender cut-off tool automatically retracts to fold on itself. By doing so, it does not interfere with the bending process..
  • ✔ LIGHTWEIGHT + QUALITY & DURABILITY - 003cb003eLightest003c/b003e portable siding bender 003cb003ecut-off tool003c/b003e in the industry (Half the weight) for easy handling - 003cb003eLong lasting003c/b003e heat treated and zinc plated cutting wheels - CNC machined and anodized body and tracking pulleys - 003cb003eHigh quality003c/b003e sealed roller bearings & stainless steel fasteners..
Check Stock

COMOWARE 4 1/2\ Cut Off Wheel 25 Pack, Cut Off Wheels 4 1/2 x 7/8 Inch Ultra Thin, Metal and Stainless Steel Cutting Wheel for Angle Grinder, General Purpose Metal Cutting Disc for Angle Grinder

  • 【SHARP & CLEAN CUTTING】 This 25-pack 4-1/2 x 7/8-inch cut off wheel set is specially formulated for fast cutting in metals and stainless steel. The extremely thin .045-inch wheel design helps for clean, straight cuts with minimal burr..
  • 【PREMIUIM MATERIAL】 These 4-1/2" cut off wheels are specifically manufactured from corundum, aluminum oxide grain that provides high hardness, durability and abrasion resistance. The internal double fiberglass reinforcement provides ultimate safety and longer service life in these ultra-thin cutting wheels..
  • 【GENERAL PURPOSE METAL CUTTING】 Proprietary aluminum oxide grain combination helps these angle grinder cutting wheels deliver aggressive cutting action on carbon steel, sheet metal, rebar steel, stainless steel and other ferrous metals (not for masonry or concrete)..
  • 【SAFETY & STABILITY】 Reinforced by 2 full sheets of fiberglass and zinc-iron alloy rings for extra durability, this very hard cutting disc delivers stable performance with less wheel shatter..
  • 【GREAT PERFORMANCE】 These 4.5" cut off wheels for metal are compatible with all 4-1/2 inch angle grinders with 7/8 inch arbor. Up to 13,300 RPM (003ecommon 13,000 RPM) rotating speed for maximum productivity..
Check Stock

SKILFUL Cut Off Wheels 50 Packs, 4 1/2 inch Ultra Thin Cutting Wheels Anti-vibration Angle Grinder Cutting Discs for Metal and Stainless Steel Cutting

  • Double Cutting Efficiency---The SKILFUL 115mm angle grinder disc adopts a unique ratio of alumina and silica, acting on a solid stainless steel plate with a thickness of 20mm, which can cut 18 pieces, while other cutting wheels can only cut 10-15 During the cutting process, burrs and clogging will not occur even when it is aluminum, thereby finding a balance between sharpness and wear resistance, thereby reducing rework rate and simplifying work.
  • Double-Layer Glass Fiber Has a Longer Service Life---We use BASF's adhesive (resin) and double-layer glass fiber mesh to make it perfectly integrated, which produces self-sharpening and adds a layer of fiber cloth to the bottom of the grinding machine cutting wheel. Reduce the resin moisture and increase the density of the cutting disc, thereby prolonging the service life and facilitating storage.
  • FITS ANY ANGLE GRINDER---Stainless steel cutting discs is 4 1/2 x0.04x7/8 inch total in 10 PCS with ultra thin metal & stainless steel fast burr free cutting.Compatible with die grinder, electric cut off tools,accessories for DEWALT,Makita ,Bosch,Ryobi and so on.
  • MULTIPLE UESES---The angle grinder disc are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals for aggressive c....
Check Stock

SALI 50 Pack Cut Off Wheel 4 1/2 Inch Cutting Wheels 4-1/2" x 3/64" x 7/8" Professional Cutting Stainless Steel, Angle Grinder Cutting Wheel,Cutting Discs with Aggressive Cutting Upgrade (4.5in, 50)

  • ✅50Pack 4.5" x 3/64" x 7/8" Premium Stainless Steel Cutting Discs is operating up to 133,00 RPM and 80M/S..
  • ✅Compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool Capable of cutting fiberglass, plastic, iron, steel, stainless steel, and other ferrous metals.
  • ✅Grinder cutting wheels are used in shipbuilding engineering, factory workshops, valve factories, power generation industry, automobile maintenance.
  • ✅ Avoid Wheel Shatter & Injury with lower priced wheels by relying on SALI’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear.
  • ✅Grinder wheels adopts 46# raw material sand, so the cutting surface will be more smooth and clear, no damage to the workpiece. Durable cutting wheel does not have debris if it is broken or damaged when in use, it will keep perfectly, ensu....
Check Stock

Cut Off Wheels and 1 Mandrel Kit, 20Pcs 3” x 1/16” x 3/8” Thin Cutting Discs with 1 Mandrel for Die Grinder

  • 【Material】The cutting wheel is made of Proprietary aluminum oxide grain combination ensures durable long wheel life and fast bur-free cutting.
  • The mandrel is made of A3 carbon steel with black plating, durable..
  • 【Function】The ultra-thin cutting wheel can achieve precise and fast cutting, while reducing burrs and material waste, minimal burrs and material waste. 3/8" & 1/4'' Mandrel are designed to fit mini cut-off wheels..
  • Perfect for General Purpose metalworking: Stainless Steel, Sheet Metal, Ferrous & Non-ferrous Metal, Cast Iron, Angle Iron, Rebar, Aluminium and Copper Cutting..
  • 【Fit for Tools】The Cut-off wheel mandrel with 1/4” Shaft, for most die grinder, air tools and drill rotary tools. Pay attention to connector size, easy to mount and demount. It's a great essential die grinder accessory..
  • 【Package】20pcs 3-inch Cut-Off Wheels + 1pc Adaptor kit.
Check Stock

OEMTOOLS 26528 10 Piece Cut Off Wheel Set with Mandrel, Cutoff Wheel Mandrel Set, Premium Metal Cutting Wheels w/ 3/8" Arbors, Die Grinder Cut Off Wheel

  • Superior Cutting: Get the best means for cutting fiberglass, plastic, steel, and other ferrous metals with our angle grinder cut off tool.
  • The flathead notch on the mandrel adaptor makes fitting the air tool arbor cutting wheels into tight spaces easy.
  • Compatible Discs: Our cutting discs are great for use on die grinders, air cut off tools, and angle grinders.
  • Get clean burr-free cuts every time with our 3 inch cut off wheel.
  • Excellent Maintenance Tools: Cut through the metallic fluid or oil lines of your vehicles with ease using our air cutting wheel.
  • Stuck bearings, bolts, screws, and more are removable with the premium metal of our 1/32” thick cut off wheels.
  • Durable Materials: Get strength from our cutting wheels for metal.
  • These cutting discs are 1/32” thick for long term use and made of premium metals that work at a max RPM of 20,400.
  • Product Specifications: 10 piece 46 Grit 3” x 1/32” cut off wheels.
  • Cutting discs feature 3/8” arbor holes.
  • Mandrel designed to fit 0.625 to 1/32” thick cut off wheels.
  • Cuts fiberglass, plastic, iron, steel, and other ferrous metals.
Check Stock

3M Green Corps Cut-Off Wheel 20275, Ceramic, 13300 rpm, 4-1/2" Diameter x 3/64" Width, 7/8" Arbor, Green (Pack of 50)

  • Ceramic abrasive grain cuts faster and lasts longer than non-ceramic grain, offering significant productivity gains.
  • Performance far surpasses that of aluminum oxide wheels.
  • Rigid, reinforced resin-bonded wheel slices through almost all materials including stainless steel, mild steel, and aerospace alloys.
  • Wheel must have a maximum operating speed greater than or equal to the maximum speed of the power tool used.
  • MUST BE USED WITH ANSI-APPROVED FLANGES FOR TYPE 1 CUT-OFF WHEELS AND A WHEEL GUARD THAT FITS THE SIZE OF THE CUT-OFF WHEEL.
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools | 2 Double Fiberglass Reinforced Discs | For Wood, Plastic, Stone, Aluminum, Copper, Brass | Dremel Cutting Tool Accessory | Made in USA 11-21702

  • ..., Aluminum, Copper, and Brass. Because the abrasive used is perfectly matched to the materials being cut, the cutting action is superior. Other formulations are HT – stands for High-Tensile Strength materials such as steel alloys, hard bronze, and metals. ST – stands for Super-Tensile Strength materials such as stainless steel and titanium..
  • Works with Variety of Tools – These cutting disks are compatible with a wide range of Rotary Cutting Tools, including Dremel tools, electric drills, hanging grinders, and so on, making them the ideal rotary cutter. Use with Gyros Stainless Steel Mandrel SKU 80-18100 for optimal results. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010.
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 2 high-quality cutting wheels which are 1 3/4 inch in diameter and 1/32-inch-thick with a center hole of 1/8 inch, with a maximum speed of 42,000 RPM. and includes 2 size-specific stainless-steel washers. A must-have rotary tool accessory for all your cutting and grinding needs..
Check Stock

Gyros 2” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-42002

  • ...ped fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the perfect rotary cutter. For best results use with Gyros Stainless Steel Mandrel SKU 80-18100. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010..
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 2 high-quality cu....
Check Stock

GYROS 1.5” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-41502

  • ...ped fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the perfect rotary cutter. For best results use with Gyros Stainless Steel Mandrel SKU 80-18100. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010..
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 2 high-quality cu....
Check Stock