Reviews Custom bend U bolt

ReadyLift 67-5012 Sway Bar Bracket

  • COMPATIBLE WITH 1995 - 2022 Toyota Tacoma (2WD 4WD). *Does NOT fit 5-Lug models..
  • CONTENTS: (2x) High-Strength Steel Rear Lift Blocks - 9/16 Pin, (4x) Square Bend 9/16th U-Bolts, Installation Hardware, Installation Instructions,....
  • TECHNICAL NOTES: 1 inch rear suspension lift. | *Please note that our lift block kits are designed to be installed directly to your truck's factory....
  • INSTALLATION: Designed to be installed simply and easily by placing our lift blocks between your axle and OE leaf pack, and then securing everything....
  • BENEFITS: Improves the look of your vehicle and increases rear-end ground clearance, allowing you to fit larger custom rims and tires. Due to their....
Check Stock

Leaf Spring Axle Extended U-Bolts (Square Bend) Compatible with Ford 1999-2004 F250 F350 Super Duty Excursion 4WD 4x4-12 inch Length - 3.15 inch Width - F-250 F-350 - Black

  • [FITMENT] Compatible with Ford 1999-2004 F-250 F250 Super Duty, 1999-2005 F-350 F350 Super Duty, 2000-2005 Excursion. Only Fits four-wheel drive 4WD models. May fit other vehicles. Verify length and width needed, as well as the bend shape..
  • [SPECIFICATIONS] Includes (4) Square Bend U-Bolts, (8) Nuts, (8) Washers. All parts are Hardware Grade 10.9. Ubolt Length: 12 inches. Ubolt Inside Width: 3.15 inches..
  • [PRODUCT BENEFITS] For use with 1 to 3 inch lift blocks / plates. These extended U Bolts ensure proper thread engagement when securing your lift pack and leaf springs to your vehicle. Designed to be solid so that it does not bend or warp under stress, and as long as they are properly installed should last the lifetime of your vehicle..
  • [MATERIAL & MANUFACTURING] The U-Bolts are made from Heat Treated Carbon Steel for optimal durability and fitment. All parts (including the Nuts and Washers) are hardware grade 10.9. Zinc plating / coating prevents surface corrosion and rust..
  • [INSTALLATION] These square ubolts do not come with instructions but is completely bolt-on. Please consult a professional if you need support. Should take 1-2 hours to install. Make sure nuts are tightened evenly (refer to diagram for sequence) and that they are torqued to correct m....
Check Stock

Supreme Suspensions - Full Lift Kit for 2005-2011 Dodge Dakota 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Round Bend U-Bolts 2WD

  • COMPATIBLE WITH 2005 - 2011 Dodge Dakota (2WD)..
  • CONTENTS: (2x) T6 Billet Aluminum Front Strut Spacers, (2x) High-Strength Steel Rear Lift Blocks, (4x) Round Bend U-Bolts, Installation Hardware,....
  • TECHNICAL NOTES: 3 inch front and 2 inch rear suspension lift. Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer....
  • INSTALLATION: Easy bolt-on installation takes 3 to 6 hours without the need for special tools. *An alignment is always recommended if you are altering....
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires..
Check Stock

Supreme Suspensions - Full Lift Kit for 1987-2004 Dodge Dakota Adjustable 1 to 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Square Bend U-Bolts 4WD

  • COMPATIBLE WITH 1987 - 2004 Dodge Dakota. *Only fits AWD models with 8.25" rear axle..
  • CONTENTS: (2x) Front Lift Torsion Keys, (2x) Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, Installation Hardware, Installation Instructions,....
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift..
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours. A torsion bar puller, or 5 ton gear puller is required for install. An alignment is always....
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion....
Check Stock

Supreme Suspensions - Full Lift Kit for 1987-2004 Dodge Dakota 4WD Adjustable 1 to 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Square Bend U-Bolts + Torsion Bar Unloading Tool

  • COMPATIBLE WITH 1987 - 2004 Dodge Dakota. *Only fits AWD models with 8.25" rear axle..
  • CONTENTS: (2x) High-Strength Steel Front Lift Torsion Keys, (2x) T6 Billet Aluminum Rear Lift Blocks, (4x) Square Bend U-Bolts, (1x) Torsion Bar....
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift..
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours without the need for special tools. An alignment is recommended after install..
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires..
Check Stock

Supreme Suspensions - Full Lift Kit for 1987-2004 Dodge Dakota Adjustable 1 to 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Square Bend U-Bolts + Axle Alignment Shims 4WD

  • COMPATIBLE WITH 1987 - 2004 Dodge Dakota. *Only fits AWD models with 8.25" rear axle..
  • CONTENTS: (2x) Front Lift Torsion Keys, (2x) Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, (2x) Axle Alignment Shims, Installation Hardware,....
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift..
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours. A torsion bar puller, or 5 ton gear puller is required for install. An alignment is always....
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion....
Check Stock

CURT 31006 24-Inch High Trailer Hitch Spare Tire Mount for 2-inch Receiver , Black

  • An easy and convenient way to secure a spare tire to a trailer tongue or frame.
  • Square bend U-bolt has threaded brackets.
  • Brackets can be locked together (padlock not included).
  • U-bolt is sturdy and durable zinc-plated steel.
  • Tongue or frame must be between 2 inches square and 3 ½ inches x 4 inches rectangular.Holds 4- or 5-lug-hole rims.Extra-long 8 ½-inch shaft can hold 8-inch to 15-inch tires.
Check Stock

uxcell Round U-Bolts 4 Sets 0.63 16mm Inner Width 46mm Length Steel M6 with Nut Plate Washer

  • Hex Nut Size: 10 x 5mm / 0.39" x 0.2"(Hex Width*H).
  • Frame Plate Size: 50 x 18 x 2mm/ 1.97" x 0.71" x 0.08"(L*W*T).
  • Round Washers Size: 18 x 6 x 1mm / 0.71" x 0.24" x 0.04"(OD*ID*T).
  • Package Content: 4 x U-Bolt, 8 x Nuts, 8 x Round Washers, 4 x Plates.
  • Material: Steel construct u bolt, galvanized surface treatment, bending forming processing technology with great performance in antirust and corrosion resistance, high hardness and good tensile strength..
  • Application: U-bolt is used to fasten or attach locking components to pipes, wood, etc. Just insert and tighten the nuts at both ends. It is suitable for the connection of boats, pipelines, trailers, and industrial steel structure conduits..
Check Stock

Flowmaster 15902 3in Universal Tailpipe Kit

  • This Universal Custom Exhaust Kit Made of High Quality T304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability, 18-Gauge Piping Walls.
  • 18-Gauge Piping Walls Of This Custom Exhaust Kit.
  • 2 X 48″ Straight Pipes, 2 X 90 Degree Pipes, 2 X 45 Degree Pipes, 2 X 180 Degree U-Bends, Detail Dimensions Please See Pictures..
  • Each 3″ Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation.
  • WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY..
Check Stock

Tricktoppers 4 Black Anodized Knurled Billet Aluminum Motorcycle License Plate Frame Fastener Tag Bolts - 44 Mag Revolver Gun Cylinder Printed Emblem

  • 4 Custom Knurled Billet Aluminum Custom Logo Motorcycle License Plate Frame Tag Bolts For Most Motorcycle Models With Through Hole Mounting Brackets Like Harley, Honda, Ducati, Kawasaki, Victory,Indian & Many More Makes.
  • Features: Black Anodized Aluminum Finish Knurled Sides Large 1/4" Tall By .8" Round Billet Aluminum Head Custom Graphic Logo Steal Treaded Stud x 3/4" Long . No tools required to install with included wing nut fastener. MADE IN THE U S A.
  • Logo Features: High Resolution Graphics Printed on 3M Automotive Grade Vinyl Gel Top Polyeurethane Domed Sealed Graphics UV & Fade Resistant Graphics Scratch & Water Resistant Graphics Logo Size 3/4" Pre-installed for you by us.
  • Part Warnings: For Minimum 1/4 License Plate Holes That can be accessed from rear to tighten combo bolts Not Recommended for most cars & trucks with machine or metal screw mounting with limited or no access to rear of license plate to tighten tag bolts May work with some bumpers with access to back side to tighten nuts on some cars & trucks or trailers.
Check Stock

SWAG GOOSENECK DIES, FIT THE 12 & 20 TON FINGER BRAKES ONLY

  • The SWAG gooseneck dies are able to bend up to 1/4" thick material..
  • Gooseneck Dies for bending custom "U" Shaped Brackets..
  • Dies come in individual 1/2" thick segments to be welded in desired finger lengths..
Check Stock

Baileigh 72-Inch Manual Hand Brake (HBR-7222)

  • The SWAG gooseneck dies are able to bend up to 1/4" thick material..
  • Gooseneck Dies for bending custom "U" Shaped Brackets..
  • Dies come in individual 1/2" thick segments to be welded in desired finger lengths..
Check Stock

3'' Mild Steel Custom Exhaust Kit Tubing Mandrel Bend Pipe Straight & U-Bend Universal 8PCS

  • This Universal Custom Exhaust Kit Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, 16-Gauge Piping Walls.
  • 16-Gauge Piping Walls Of This Custom Exhaust Kit.
  • 2 X 48″ Straight Pipes, 2 X 90 Degree Pipes, 2 X 45 Degree Pipes, 2 X 180 Degree U-Bends, Detail Dimensions Please See Pictures..
  • Each 3″ Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation.
  • WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY..
Check Stock