Reviews Custom Punch And Die

TEMCo TH0364 Dimple Die for 1-1/4” Actual Hole Size

  • Dimple Die for 1-1/4” Actual Hole Size.
  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • This dimple die set creates flared holes. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • Recommended Compression Tool: TEMCo Industrial TH0037 Knockout Punch Set or any other electricians knockout punch set..
Check Stock

ABN Power Punch Heavy Duty Hole Punch Set – Metal Hole Punch, Heavy Duty Hole Puncher Hand Punch 3/32in to 9/32in

  • PUNCH HOLES IN YOUR PROJECT: The ABN Hole Punch Tool is a heavy duty punch and dies kit that has a high-leverage design and comfortable grips that allow you to manually create clean holes through sheet metals up to US 16 gauge.
  • For mild sheet steel, aluminum, brass, polyurethane, plastic, canvas, cardboard, paper, shoe.
  • Additionally use as a leather punch, belt hole puncher, metal hole punch for jewelry, and watch hole puncher.
  • Not recommended for stainless steel such as silverware and utensils.
  • PERFECT SIZE: Creates holes that are from 3/32-inch to 9/32-inch in diameter and includes a stop gauge for consistent spacing.
  • 7 sizes of punches and dies include 3/32-inch (2mm), 1/8-inch (3mm), 5/32-inch (4mm), 3/16-inch (4.5mm), 7/32-inch (5.5mm), 1/4-inch (6mm), 9/32-inch (7mm).
  • 1.75-inch (4.4cm) throat depth to punch holes as close as 1.75 inches away from material edge.
  • EASY TO USE: This sheet metal punch uses interchangeable heads to pierce holes in a material of your choosing.
  • Select a proper size punch and die, remove nut near handle using die adjustment tool, move connection bar, place punch on the head of hand punch, rotate nut by again using the adjustment tool to adjust caliper, and set distance between the edge and the hole.
Check Stock

Eastwood 37 Degree Flare Die Set for Professional Brake Tubing Flaring Tool

  • Add These 37-Degree Flare Dies To Our Pro Brake Tubing Flaring Tool So You Can Do Even More..
  • Put 37-Degree Flares On 3/16", 1/4", 5/16" And 3/8" Tubing.
  • 37-Degree Flares Are Used In Many Custom, Hydraulic And Military Applications Where An- Or Jic-Type Fittings Are Used.
Check Stock

Hand Press Grommet Machine, Heavy Duty Industrial Grommet Eyelet Tool Kit Table Mount Rivet Press Hole Punch Tool with 3 Dies and 900 Grommets

  • This 3 die hand press grommet machine is an essential equipment for dress makers, arts & crafts, sign shops and manufacturers, ideal for craft and industrial use.
  • Made of cast iron, built to last. This manual eyelet punch grommet machine is smart which is very easy to operate because of the simple structure, also convenient for shipping.
  • Specially designed for banners, signs, awnings, posters, curtains, digital printing, scrapbooking, corsets, belts, bags, shoes, etc, widely used as punch machine, eyelet machine, snap fastener machine, rivet machine.
  • The rivet press hole punch tool machine can be mounted to a tabletop or stand alone, which can fit anywhere as you want, just install with the die in suitable size.
  • Package includes 1 x Grommet Machine, 3 sets x Dies, 3 bags x Grommets (Total 900 pcs). The eyelet punch tool can exchange different die sets and 3 different dies can meet most needs.
Check Stock

Lord & Hodge 1073A-1 Grommet Kit

  • Number of Grommet Sets Per Kit: 24 Tools with kit: Cutting Block, Hole Cutter, Inserting Punch and Die..
  • A handy, compact, economical kit complete with tools and 12 rustproof brass grommets for immediate replacements or repairs in canvas or plastic..
  • Easy to follow instructions #0, 1/4" inner diameter Manufacturer: Lord & Hodge..
  • Tools with kit: Cutting Block, Hole Cutter, Inserting Punch and Die. No. 1073A 0: 1 4.
Check Stock

100 pc Brass Grommet 1/2\ ID Set

  • Complete with tool and rustproof brass grommets for replacement or repairs in canvas or plastic. Instructions included.
  • 24 per package,an inside diameter of approximately 5/16-inch.
  • Tools with kit: Cutting Block, Hole Cutter, Inserting Punch and Die.
  • A handy, compact, economical kit complete with tools and 48 rustproof brass grommets for immediate replacements or repairs in canvas or plastic.
Check Stock

Fein Metal Sheet Nibbler - 350 Watts Power Consumption, 210 Watts Power Output, 1800 RPM Strokes - 72324260120

  • Professional Grade - It has a rotating punch for up to 30% longer service life, has motor with outstanding performance and durability. It has low operating costs due to long tool life of punch and die..
  • Lightweight - It has optimum ergonomics, including a motor housing that is up to 20% slimmer due to an extremely narrow drive head..
  • Safety Ergonomic - It has chip protection mesh on vent slots. This tool has QuickIn rapid change system that allows for rapid, tool-free changing of the punch and die..
  • Multipurpose - It has cutting direction setting can be changed in 45.
  • Specifications - Power Consumption: 350 W, Strokes: 1,000-1,800 SPM, Cutting Speed: 7.5 ft./min., Cutting Width: 3/16.
Check Stock

Greenlee 7211BB-1/2 Slug-Buster Knockout Punch Unit, 7/8-Inch

  • Unique punch profile also splits slugs for easier slug removal.
  • Use with battery-powered, hydraulic, ratchet or manual drivers.
  • Can be used on mild steel up to 10 gauge.
  • Punch unit sets include punch, die, and draw stud.
Check Stock

Lichamp Manual Knockout Punch Kit, Heavy Duty Metal Sheet Knock Out Box Hole Cutter Conduit Punch Driver Die Set

  • Sheet Metal Knockout Punch Kit, perfect for mild steel under 10 gauge (3.5mm), such as sheet steel, copper, aluminum, brass, fiberglass, some plastics, electrical pipe, quazite, conduit (NOT FOR Stainless Steel, Wood, Drywall).
  • Heavy Duty Classic Hole Punch Kit, forged, machined and heat treated high carbon steel construction..
  • Economic Knockout Punch Driver Set, complete conduit punch set include 4 dies, 4 hole punches, 2 bearing driving bolts.
Check Stock

TECH-P Creative Life Shape Size 1

  • Spring-action lever makes the punch easier and more comfortable to use and gentle your hands..
  • Create stencil shapes, die-cuts, and templates for all of crafting.
  • Use with other nesting punches to create perfectly graduating layers.
  • Punches cleanly every time for consistently great designs..
  • Craft punch Large Size: 7cm(L)X5.5cm(H)x4.2cm(w).
  • Punch out pattern size: 2cm- 2.5cm diameter..
  • Ergonomic handle, fast and easy to punch out shapes..
  • We offer avariety of shapes such as circle, leaf, retro flower, apple, palm tree, flowers, sun, butterfly, angel, heart, flower, crown, bear, star, ribbon, musical note, snow flake, happy face.
  • Good for regular paper, EVA foam, foil, craft paper...etc.Please keep away these items from 0-3 years old children for safety..
Check Stock

PIKWO Hand Press Heavy Duty Eyelet Grommet Machine Rivet Press Punch Tool Kit with 3 Dies and 900 Pcs Grommets Self Piercing Grommet Maker Labor Saving Corsetry Class Recommended

  • [Whats In The Package]3 Interchangeable Dies & Grommets: Including #0 (1/4", 6 mm), #2 (3/8", 9.5 mm), #4 (1/2", 12 mm) dies & 900 grommets (300 each....
  • [Improve Your Efficiency]There is a snap-ring incorporated onto the stem of the top die and it holds the grommet in place,no nees to hold the grommet....
  • [Make A Perfect Grommet]Self piercing grommet machine with our die set and nickel plated grommets will punch a hole and set the grommets in one....
  • [Labor Saving]Mounted to a tabletop or just stand alone. Gets grommets to be set further into the material, not just along the Edge. Press the Lever,....
  • [Application]Our grommet machine can be used as a punch machine, eyelet machine, and rivet machine. It can help you to punch the grommets for Banners,....
Check Stock

STOBOK 2pcs Picture Corner Trimmer Punch Corner Rounder Punch Corner Cutter Board Hole Puncher for Handicrafts Black

  • ROUND CORNER PUNCH: This fillet works well and cuts well. The incision is clean and completely rounded..
  • CORNER TRIMMER CUTTER : Easy to Carry: Small size and light weight will not increase your extra space and burden..
  • PHOTO TRIMMING TOOL: The round corner device with the upper die with the lower die cut out of stainless steel, cutting paper will not rough edges..
  • PUNCH CORNER TRIMMER: Humanized Design: Behind the cover, the bottom of the lid can be opened, very convenient to clean wastepaper..
  • HANDICRAFTS TRIMMING TOOL: You can present the paper corner trimming machine to your friends who like DIY making..
Check Stock

1 Ton Aviation Power Punch Kit Sheet Metal Hole Punching 7 Sizes Die DIY Repair

  • Durable power punch tool for punching accurate round holes through all types of materials.
  • From thin brass metal to plastic sheet through 16 gauge mild steel..
  • Package comes with seven quick-change, durable heat treated punch-and-die sets..
  • Sizes from 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 and 9/32". Punch opens up to 1/4".
  • Set completes with a durable plastic storage case.
Check Stock