Reviews Custom Inductors

MartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan ElectroMotion ESL X Floor-Standing Speaker Each (Satin Black)

  • High-frequency transducer: XStat CLS electrostaic transducer.
  • Panel dimensions: 40" x 8.6" (102cm x 22cm), Radiating area: 344 in2.
  • Low-frequency driver: Two 8” (20.3 cm) high excursion, high-rigidity paper cones with extended throw driver assembly, non-resonance asymmetrical chamber format, bass reflex.
  • Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 41–22,000 Hz ±3dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-400 watts per channel.
  • Dimensions: 59.2 x 9.4 x 20.7 (150.3cm x 23.8cm x 52.6cm), Weight: 52lbs. (23.6kg) each.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
  • Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
  • Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
  • Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
  • Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check Stock

Elesunory 24 Values 240 Pcs Inductors Set I-Shaped Inductor 2.2uH to 100mH Cylindrical Plug-in Inductor Assortment Kit (Black)

  • 【Various Specifications】This inductor set has 240 traditional through-hole inductors, classified in 24 small transparent envelopes, each with 10 values. The rich and diverse product specifications perfect to work in your circuit work..
  • 【High Quality】Made of high-quality professional guide pins, stable performance, not easy to open circuit phenomenon, large current resistance, high self resonant frequency. The choice of values is perfect for filter design in power switching or audio applications..
  • 【Easy to Use】We distribute the inductors in plastic storage boxes (a single-compartment box that snaps closed), and stick a clear label on the surface of the box to provide users with the type of inductors they need, which is convenient and fast to use..
  • 【High Quality】 The plug-in I-shaped inductor uses fine materials, meticulous craftsmanship, compression and corrosion resistance, durable and practical, low energy consumption, stable performance, and each value is produced under strict standards, allowing you to get a perfect product..
  • 【Quality Service】This inductors assortment kit is of good quality. In order to optimize your shopping experience, we provide a 180-day free replacement service. If you have any questions about our products, pl....
Check Stock

Cofufu DIP Inductor Assorted Kit 28 value total 280pcs 1uH to 1mH

  • ..., 10, 22, 33, 47, 100, 220, 330, 470, 680. Covers the most common models, commonly used in various household appliances, automobiles, industrial applications, etc. Has passed strict certification and passed RoHs, each type is packed in anti-static bags, the box is small, easy to carry, and use.
  • ✅[High-Quality Chip Inductors]exquisite workmanship, excellent quality, stable inductance, good solderability, and heat resistance. Low frequency, more reliable performance, and lower energy consumption, sufficient voltage, more stable work, Durable, copper coil, higher efficiency.
  • ✅[Wide Application]Excellent inductors can be used stably in a variety of cruel work, widely used in speakers, communication equipment, mobile power supplies, imagers, computer hard drives, photocopying, air conditioners, cameras, smart washing machines, fax machines, TVs, automotive electronics, smart door locks, etc.
  • ✅[Cost-Effective & Time Saving And Labor Saving]Excellent inductors, starting from four points, are efficient, high-quality, fast, and durable, and fundamentally ensure that the inductors received by each user are perfect and cost-effective. The most important thing is that you don’t have to go out to the store to buy it, you can receive it at home, save more tim....
Check Stock

MartinLogan ElectroMotion ESL Electrostatic Floorstanding Loudspeaker - Each (Gloss Black)

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • 129 square inches of sound radiating surface on both the front and back.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-300 watts per channel.
  • Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock

BHSKJSZ 13 Values 130 Pcs Inductor kit 1MH to 3.5 MH DIP Radial Power Choke Inductors Assortment Kit for Circuit Board Indoor/Outdoor LED Strip Lights

  • Industrial Electrical Inductors can be widely used in circuit boards,LED equipment, power switches, notebook, television, computers, automotive....
  • I-Shaped Inductor , for better stability, are protected with PVC/UL pipes, and can provide better stable performance. With a special guide needle....
  • inductor choke meticulous craftsmanship, compression and corrosion resistance, durable and practical, low energy consumption, stable performance, and....
  • We pack the inductors into a 13-grid plastic storage box, which is convenient for users Use and search, the inductor set box is small in size, does....
  • You will get 130Pcs DIP radial power choke inductors, including 1MH, 2MH, 2.5MH, 3MH, 3.5MH, 3.6MH, which are classified in 13 grid transparent box..
Check Stock

MartinLogan Motion SLM X3 Ultra-Slim 3-Channel Passive Soundbar - Black

  • L-C-R soundbar, Slim design, Binding Posts: Push style.
  • High Frequency Driver: Three 1" x 1.4" Folded Motion Transducers with 5.25" x 1.75" diaphragm.
  • Low Frequency Drivers: Six 4" paper cone, sealed cabinet.
  • Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors in parallel, overall system thermal/current protection.
  • Frequency Response: 120–23,000 Hz ± 3 dB.
  • Dispersion: 80° x 80°, Sensitivity: 93 dB @ 2.83 volts/ meter.
  • Impedance: 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers..
  • Crossover Frequency: 3,000 Hz (2-way design), Recommended Amplifier Power: 20–140 watts.
  • Dimensions with wall bracket (HxWxD): 6.3" x 48" x 2".
Check Stock

uxcell a13070600ux0394 10 Piece 2 Leads 100uH 8x10 8 mm x 10 mm Radial Leaded Power Inductors

  • Color Rings:The first two of these represent a two-digit significant number. The third band represents the multiplier. The inductance is calculated by multiplying the significant number by ten to the power of the value of the third band. The fourth band represents the tolerance..
  • Small inductors having high Q and low distributed capacity. Excellent for use where space, weight and size is a factor..
  • Axially leaded inductors with a 10% tolerance suitable for a wide range applications including decoupling, filtering and RF blocking..
  • These fixed inductors are coated with epoxy resin ensures humidity resistance for long life.Fixed inductor uses multiple coils of a conducting material to store energy using a magnetic field..
  • For low current and low power are made in cases resembling resistors. These may be either plain (phenolic) core or ferrite core. An ohmmeter readily distinguishes them from similar-sized resistors by showing the low resistance of the inductor..
Check Stock

Martin Logan - ElectroMotion ESL - Hybrid Electrostatic - Each - Black

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Recommended amplifier power: 20-300 watts per channel, Crossover frequency: 500 Hz.
  • Convenient push-style speaker terminals for bare wires, pins, or bananas, Sturdy, 1/4-20 ETC spikes.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Dispersion: 30-degrees x 34" line source, Sensitivity: 91 dB/2.83 volts/meter.
  • Nominal Impedance: 6 Ohms, 1.6 @ 20 kHz, compatible with 4, 6, or 8 ohm rated amplifiers.
  • Weight: 35.5 lbs. each, Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock

150 pcs Inductor Large Assortment 15 Values 10uH to 4.7mH, 1W, 1 watt

  • 【Small Vertical Inductive】 Small Vertical Inductors Occupy Less Space..
  • 【Performance Stability】 The Inductor Coil Is Protected with PVC or UL Tube To Ensure Stable Performance..
  • 【Feature】 this Choke Inductor Has Special Guide Pin Structure.
  • Not easy to produce open circuit phenomenon..
  • 【Specification】 1uh to 220uh 1MH to 20MH.
  • The Choke Coil Inductors Arefi SMALL Distributed Capacits And High Self-Resonance Frequency..
  • 【Include】 10UH, 100UH, 220UH, 1UH, 4.7UH, 15UH, 33UH, 150UH, 1MH, 2.7MH, 10MH, 20MH, 10UH, 1MH, 10MH.
Check Stock

BOJACK 15 Values 160 Pcs Inductor 10 uH to 20 mH DIP Radial Power Choke Inductors Assortment Kit

  • Small vertical inductors occupy less space..
  • The inductor coil is protected with PVC or UL tube to ensure stable performance.
  • This choke inductor has special guide pin structure.
  • Not easy to produce open circuit phenomenon.
  • The choke coil inductors are of small distributed capacitance and high self-resonance frequency.
  • Include：10uh, 1uh, 33uh, 2.7mh, 100uh, 4.7uh, 150uh, 10mh, 1mh, 220uh, 15uh, 20mh 15model, Packed in A plastic storage case.
Check Stock

145pcs inductor coil 10uH-10mH choke inductor assortment kit vertical high frequency inductor to pass high frequency industrial electrical low frequency block

  • With special guide pin structure, not easy to produce open circuit phenomenon..
  • Small vertical inductors occupy less space..
  • 145 pieces of inductors in 12 values can meet your general needs..
  • Small distributed capacitance and high self-resonance frequency..
Check Stock