Insta Cure #1 (Prague Powder 1) - Curing Salt for Meat and Sausage - 5 lbs. - The Sausage Maker
- Insta Cure #1 is a simple, easy to use curing agent for meats that require cooking, brining (wet curing), smoking, or canning. This includes jerky, ham, bacon, brisket, sausage, snack sticks, corned beef, pâtés, pastrami, luncheon meats, meat loaves, poultry, fish and more.
- Curing meat helps to prevent common food borne illnesses associated with trapped air in meat mixture. For use on low & slow smoked/cooked meats with a short curing window.
- Contains 5 lbs. of Insta Cure #1, enough to process approximately 480 lbs. of meat.
- The Sausage Maker recommends using 1 level teaspoon per 5 lbs. of ground meat. Recipes may call generic names such as “curing salt".
- Insta Cure is a Trademark of The Sausage Maker Inc. Made in USA.
Check StockInsta Cure #1 (Prague Powder 1) - Curing Salt for Meat and Sausage - 4 oz. - The Sausage Maker
- Insta Cure #1 is a simple, easy to use curing agent for meats that require cooking, brining (wet curing), smoking, or canning. This includes jerky, ham, bacon, brisket, sausage, snack sticks, corned beef, pâtés, pastrami, luncheon meats, meat loaves, poultry, fish and more.
- Curing meat helps to prevent common food borne illnesses associated with trapped air in meat mixture. For use on low & slow smoked/cooked meats with a short curing window.
- Contains 4 oz. of Insta Cure #1, enough to process approximately 120 lbs. of meat.
- The Sausage Maker recommends using 1 level teaspoon per 5 lbs. of ground meat. Recipes may call generic names such as “curing salt".
- Insta Cure is a Trademark of The Sausage Maker Inc. Made in USA.
Check StockInsta Cure #1 (Prague Powder 1) - Curing Salt for Meat and Sausage - 1 lb. - The Sausage Maker
- Insta Cure #1 is a simple, easy to use curing agent for meats that require cooking, brining (wet curing), smoking, or canning. This includes jerky, ham, bacon, brisket, sausage, snack sticks, corned beef, pâtés, pastrami, luncheon meats, meat loaves, poultry, fish and more.
- Curing meat helps to prevent common food borne illnesses associated with trapped air in meat mixture. For use on low & slow smoked/cooked meats with a short curing window.
- Contains 1 lb. of Insta Cure #1, enough to process approximately 480 lbs. of meat.
- The Sausage Maker recommends using 1 level teaspoon per 5 lbs. of ground meat. Recipes may call generic names such as “curing salt".
- Insta Cure is a Trademark of The Sausage Maker Inc. Made in USA.
Check StockInsta Cure #1 (Prague Powder 1) - Curing Salt for Meat and Sausage - 8 oz. - The Sausage Maker
- Insta Cure #1 is a simple, easy to use curing agent for meats that require cooking, brining (wet curing), smoking, or canning. This includes jerky, ham, bacon, brisket, sausage, snack sticks, corned beef, pâtés, pastrami, luncheon meats, meat loaves, poultry, fish and more.
- Curing meat helps to prevent common food borne illnesses associated with trapped air in meat mixture. For use on low & slow smoked/cooked meats with a short curing window.
- Packet Contains 8 oz. of Insta Cure #1, enough to process approximately 240 lbs. of meat.
- The Sausage Maker recommends using 1 level teaspoon per 5 lbs. of ground meat. Recipes may call generic names such as “curing salt".
- Insta Cure is a Trademark of The Sausage Maker Inc. Made in USA.
Check StockHoosier Hill Farm Prague Powder No.1 Pink Curing Salt, 2.5 Pound
- Prague Powder #1 can be used in the preserving and curing of: Semi-dry and cooked meats, Sausage, Fish, Jerky, Bacon, Ham, Pastrami, Hard Salami, Corned Beef..
- Contains 2.5 lbs of Prague Powder No.1 Pink Curing Salt, also referred to as Tinted Cure or Pink Curing Salt. A critical component in the meat curing and sausage making process, enough to cure 1000 lbs of meat..
- Hoosier Hill Farm is located in America’s heartland of northeast Indiana. Our products and ingredients are guaranteed fresh and we are proud of our heritage and good, old-fashioned values!.
- Use 1 oz. of cure for 25 lbs. of meat or 1 level teaspoon of cure for 5 lbs. of meat or fish. Mix cure with cold water. Too much or too little Pink Curing Salt can adversely affect health, taste, and food quality..
- To cure correctly and within food safely guidelines, it is extremely important to use the proper amount of Prague Powder #1. As a curing agent, Prague Powder #1 serves to inhibit bacteria growth and helps to maintain meat flavor and appearance..
Check StockColloidal Silica Rigidizer - Coating for Refractory Ceramic Fiber Products - 1 Quart
- rigidizer can be used as the cohesive agent for various fireproof materials, widely used in industrial furnace thermal technology equipment, and has....
- high temperature stability, Withstand Temperature up to 2300 F.
- Applied by spraying, rolling, dipping, or brushing, Normal Curing Time 24 Hours (Post Application).
- Rigidizer can be used in paper-making industry . It can be used as the anti-glutinous agent of cellophane, pre-treatment agent of photographic paper,....
- High Velocity Resistance, Reduces Hot Gas Erosion or Flame Impingement., Reduces Airborne Particles.
Check StockREALINN Epoxy Tile Grout Bright Porcelain White 400 ml, Dual Tube Waterproof Stain-Proof Colorant Resin Sealer, Restore and Spruce Up Tile Grout Line for Bathroom Kitchen Wall Floor
- Epoxy Grout, made of epoxy resins combined with curing agent, pigment. Advanced double tube design, easy to apply, no mixer pre-mix, just one double tube epoxy gun to finish the job. (NOTE: Caulking gun and tools are not included. ).
- Color: Bright Porcelain White. Even color, long lasting and no discoloration. Non-hazardous, no unpleasant odor..
- Strong and durable, with greater bond strength and greater flexibility. Heat and cold resistant, no cracking, shrinkage or discoloration..
- Waterproof and stain-proof, widely used in tile showers and kitchens, floors and walls, splashback tiling over vanities and countertop, surfaces underneath sinks or basins, swimming pools, could use both indoor and outdoor. Ideal replacement for regular grout and sealant caulk..
- Kit includes: Double tube epoxy grout (200g for tube A + 200g for tube B) + 3 static mixing nozzle. Tips: When using the first time, please squeeze out grout about 30 cm and discard. Prevent failure to dry and poor adhesion due to uneven mixing of pigment and curing agent..
Check StockPARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon
- Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
- Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
- Protects against mold hang ups with polyester and vinyl-ester resins.
- also used with epoxy and urethane resins.
- PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
- Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check StockPVA - PARTALL Film #10 Polyvinyl Alcohol (PVA) Pint
- Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
- Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
- Protects against hang ups with polyester and vinyl-ester resins.
- also used with epoxy and urethane resins.
- PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
- Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check StockPARTALL Film #10 Polyvinyl Alcohol (PVA) Half Gallon
- Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned molds can be reactive)..
- Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
- Protects against surface hang ups with polyester and vinyl-ester resins.
- also used with epoxy and urethane resins.
- PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
- Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check StockPVA - PARTALL ® Film #10 Polyvinyl Alcohol (PVA) Half Pint
- Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned surfaces can be reactive)..
- Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble.
- Protects against hang ups with polyester and vinyl-ester resins.
- also used with epoxy and urethane resins.
- PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
- Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure).
Check StockBewinner UV Glue Curing Lamp Ultraviolet 3W USB LED Purple Light - LED Lamp Bead,Wavelength: 395 - USB Powered,Support Plug and Play - Wide for Repairing Phones or Fluorescent Agent Detection
- 【Multi-Purpose Maintenance Light】UV glue curing LED purple light is used for cell phone circuit board repair. It can also be used for fluorescent agent detection and fluorescent banknotes..
- 【Flexible Uv Glue Curing Lamp】The gooseneck can be bent freely in 360 degrees, and the height and direction of the light can be flexibly adjusted to always find the ideal position. With fixing clip to ensure smooth and stable operation..
- 【USB Powered】The UV glue curing lamp is equipped with a control switch and a USB power supply interface. It supports plug and play and is easy to use. 3W LED lamp beads, wavelength: 395, low power consumption, long life, safety and environmental protection..
- 【Easy To Use】The UV glue curing lamp is equipped with a clip, which is very suitable for fixing on the bedside table, desk, laptop table, headboard, etc. The clip can be opened 3 to 5 cm, the metal arm can bend flexibly, but at the same time it can fix the position..
- 【Quality Service】If the product has any quality problems or you have any questions about this product, you can contact us at any time,we have a 24-hour online professional customer service team.we will try our best to solve your problem in time,please rest assured to buy..
Check StockUV Glue Curing Lamp, USB 3W LED Lamp Bead UV Glue Ultraviolet Purple Light, Ultraviolet UV Glue Lamp with Clip and Switch for Phone Repair
- UV GLUE CURING LAMP: The UV LED desk lamp clip is designed with a 30 cm long gooseneck and a 6 cm wide stable clip. The USB power cord is about 120 cm long, which can be flexibly rotated and carried at different angles..
- USB POWERED: The desk clip light requires 5V constant voltage and DC power supply, suitable for power adapters, mobile power supplies and computer USB ports. The nail polish curing lamp supports plug and play, convenient to use..
- STURDY & COMPACT & FLEXIBLE: The gooseneck can be bent freely in 360 degrees, and the height and direction of the light can be flexibly adjusted. Stable base clip can be used to hang, clip and keep flat on the desktop, a variety of ways to meet your different needs..
- SUITABLE FOR OCCASIONS: Not only for lamp nail polish, repairing phones, for UV black paint, fluorescent paint, resin art, ultraviolet curing, black light posters, stain detection and glow party, but for fluorescent agent detection and fluorescent banknote..
- PACKAGE INCLUDES: 3W LED lamp beads, 30% BRIGHTER, with upgraded single big chip UV LED black light fixture from double chip 395nm UV LED. If you have any questions, please feel free to contact us, we are always on-line to help you..
Check Stock