Reviews Cu Bushing

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

Hex Bushing 1 Male x 1/2 Female Brass for Repair Threaded Pipe Fitting Pack of 1

  • ENHANCED QUALITY BRASS Makes Hex Bushing Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Hex Bushing have 1" Male....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our Hex Bushing can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices, Collectors, etc.
  • DURABLE –Our Hex Bushing don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. N.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check Stock

Bushing Fix UP1KIT - Transmission Shift Cable Bushing Repair Kit

  • Kit includes replacement bushing and application specific installation tools..
  • Text and video instructions along with tech support make installation very easy..
  • Used by many transmission and service professionalsDescriptionThe transmission shift cable linkage kit allows you to quickly and easily repair your shift selector cable by replacing the bushing or grommet. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install. The kit includes DIY instructions, custom molded bushing, and patent pending installation tools. Works in 4T40-E, 4T45-E, and 4T65-E transmissions. This kit fits the following vehicles: Chevrolet Uplander.
Check Stock

TEMCo TH0410 Rotary Cable Stripper Kit for THHN / XHHW 6 Gauge to 750 MCM (Compatible with any drill)

  • Cable Stripper will strip THHN / XHHW cable from 6 gauge to 750 MCM with varying insulation thickness..
  • Wire stripper can be used with any drill or cordless drill..
  • Includes bushings for 6awg CU/AL, 4awg CU/AL, 3awg CU, 2awg CU/AL, 1awg CU, 1/0 CU / 2/0 AL, 2/0 CU / 3/0 AL, 3/0 CU, 3/0 CU / 4/0 AL, 4/0 CU, 4/0-250MCM CU / 250MCM AL, 250MCM CU / 300MCM AL, 250-300MCM CU / 300MCM AL, 300MCM CU / 350MCM AL, 350MCM CU / 400MCM AL, 350-400MCM CU / 400MCM AL, 350-400MCM CU, 500MCM AL, 500MCM CU, 500MCM CU / 600MCM AL, 500-600MCM CU / 600MCM AL, 600MCM CU, 600MCM CU / 700MCM AL, 600-700MCM CU / 750MCM AL, 700MCM CU, 750MCM CU / 900MCM AL.
  • Each die has adjustable depth for changing insulation thickness.
  • Stripper can be adjusted to strip lengths up to 4” depending upon application..
Check Stock

Titan Complete Quick Hitch Bushing Kit for 3 Point Hitch Tractors Top Link and Lower Lift Pins

  • QUICK HITCH BUSHING KIT: This 3Pt bushing kit allows you to adapt your implement to fit quick hitches. Simply slide the bushings onto your lower lift pins and top link pin to reduce and remove spacing for a better, more secure fit..
  • MADE FROM COATED STEEL: Each bushing will be made from zinc coated steel. This coating prevents the steel from rust and corrosion, so you do not have to worry about the bushings breaking down over time..
  • SIX TOP LINK PIN ADAPTERS: This Quick Hitch Bushing Kit will include 6 total top link adapters. These adapters range in length and thickness to allow you to convert category 0, category 1, and category 2 top link pins to better fit your quick hitch..
  • EASY INSTALLATION: With this bushing kit, installation is a quick and easy. Slide the top link bushing over your top link pin and use the shoulder bushings on your lower lift pins. Secure the shoulder bushings using the included roll pins by hammering them into position..
Check Stock

SHIGA Skateboard Longboard Replacement Bushings Conical Cushions - 92A Resiliency

  • Keep your skateboard better and more comfortable.
  • Are you still worried about the squeaking of skateboards? Our skateboard bushing has rebound, which brings you a quieter and smoother experience..
  • The bushing kit consists of a tapered top bushing and a cylindrical bottom bushing..
Check Stock

Partol Carburetor Carb 2 Barrel Compatible with Ford Mustang F150 F250 F350 Comet Engine 289 Cu, 302 Cu, 351 Cu Wagoneer 360 Cu - Automatic Choke

  • Compatible with Ford Mustang 1968~1973 Engine 289 Cu, 302 Cu, 351 Cu / Ford F150 1964~1978 Engine 289 Cu, 302 Cu, 351 Cu / Ford F250 1964~1978 Engine 289 Cu, 302 Cu, 351 Cu / Ford F350 1964~1979 Engine 289 Cu, 302 Cu, 351 Cu / Ford Comet 1964~1982 Engine 289 Cu, 302 Cu, 351 Cu / Wagoneer 1964~1978 Engine 360 Cu.
  • Improve throttle response for better engine performance. Mounting gasket & seal included.
  • Add More Horse Power While Maintaining Near Stock Fuel Mileage Directly Replace the Old / Broken One.
  • Improve throttle response for better engine performance, add 5~10% horsepower and maintain near stock fuel mileage.
  • Part Number: 2100,A800. Package: 1x car carburetor..
Check Stock

NENKUTEN 2 Barrel Carburetor 2100 2150 A800 Carb for Ford 289 302 351 Mustang Cu Jeep Engine F100 F150 F250 F350 Jeep 360 Cu with Electric Choke Gasket Float Level Ruler

  • 【Premium Quality】: Brand New Premium quality 2 Barrel Carburetor 2100 2150 for Ford 289 302 351 Cu Jeep Engine F100 F250 F350 Jeep 360 Cu with Electric Choke, The carburetor is made of high quality aluminum alloy for durability, helping your car run at peak performance, 100% tested before shipment, perfect choice to replace your defective carb assembly..
  • 【Fits】: Fits for Ford Mustang Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1968-1973.
  • for Ford F100 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1978.
  • for Ford F150 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1978..
  • 【Fits】: Fit for Ford F250 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1978.
  • for Ford F350 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1979.
  • for Jeep Wagoneer Engine 360 cu in (5.9 L)1964-1978.
  • for Ford Comet Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1982..
  • 【Package】: 1x Carburetor, 1 x Mounting Gasket, 1 x Seal Ring, 1 x Float Level Ruler. As shown in the picture..
Check Stock

GELUOXI Carburetor Two 2 Barrel Carburetor Carb 2100 2150 Compatible with Fo rd F100 F250 F350 Mus-tang Mer-cury 289 302 351 Cu Engine,Compatible with J-e-e-p Engine with Electric Choke

  • carburater Part Number: 2100A800 / 2100-A800. Package include: 1*Carburetor. 1*Mounting gasket. 1*Seal. All our accessories are professionally tested at the factory. Please make sure the project is suitable for your model before purchasing..
  • Compatible with: Fo-rd Mu-stang Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1968-1973.
  • Fo-rd F100 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1978, Fo-rd F250 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1978.
  • Je-ep Wa-goneer SJ Engine 360 cu in (5.9 L) V8 1964-1978..
  • Compatible with: 1964-1978 Je-ep Wa-goneer 360 Cu 5.9L.
  • 1968-1973 Fo-rd Mus-tang 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L.
  • 1964-1978 Fo-rd 100 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L.
  • 1964-1978 Fo-rd F250 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L.
  • 1964-1979 Fo-rd F350 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L.
  • 1964-1982 Mer-cury Comet 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L..
  • Compatible with: Fo-rd F100/F250/F350 with 289 302 may also know as 2-Barrel Carburetor, F250 Carburetor, F350 Carburetor, F100 Carburetor, 289 Carburetor, 302 Carburetor, 351 Carburetor, 351 Carburetor 2 barrel, 2100 carburetor, 2150 carburetor, 2100 Carb, 2bbl carburetor, 302 carb,carburetor 2 barrel f100, 2100 A800 carburetor..
Check Stock

maXpeedingrods 2 Barrel Carburetor for Ford 289 302 351 Cu F100 F250 F350 Mustang Comet,for Jeep Wagoneer 1964-1978 360 Cu Engine 2100 2150 Electric Choke with Mounting Gasket 302 Carburetor Carb

  • 【Wide Compatibility Carburetor】Fit for Ford Mustang Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1968-1973.
  • for Ford for F100 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1978.
  • for Ford for F250 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1978.
  • 【Wide Compatibility Carburetor】Fit for Ford for F350 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1979.
  • for Ford Comet Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1982.
  • for Jeep Wagoneer Engine 360 cu in (5.9 L)1964-1978.
  • 【Fit for Engine】 2-Barrel replacement carburetor for 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) engine.
  • 【Add More Power】Add 5~10% horsepower for better engine performance,give your machine the new power it deserves.
  • 【Specifications】Type: Automatic/Electric choke .Material: Premium Aluminum Alloy Structure.Part Number: 2100 A800.Venturi Size:29.5mm=1.16inch.
Check Stock

2 Barrel Carburetor Carb 2100 A800 2150 for Ford 289 302 351 Cu Jeep Engine F150 F250 F350 with Electric Choke Mounting Gasket - 302 Carburetor / 351 Carburetor 2-Barrel / 2150 Carb

  • Compatible with: Jeep Wagoneer 1964-1978 with 360 Cu Engine, for Ford Comet 1964-1982 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L), for Ford F350 1964-1979 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L).
  • Carburetor Fit for Ford Mustang Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1968-1973,for Ford F100 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1978,for Ford F250 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1978.
  • Part Number: 2100 A800, 2100-A800, 2100A800.
Check Stock