Reviews Cu Alloys

20 Sticks Aluminum Welding Rods ，20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉，Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

  • ...good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
  • 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
  • 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all problems for you. Looking forward to your suggestions for welding rods, we will continue to improve our products and serve you better..
Check Stock

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

  • Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
  • Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
  • Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
  • Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
  • High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....
Check Stock

9 PCS Element Cube Set 10mm Density Cubes Up to 99.99% Pure Daily Metal Cubest Titanium Bismuth Carbon Nickel Iron Copper Zinc Aluminium Tin for Collections DIYs

  • Real element, high purity, up to 99.99% (Not alloys).
  • Accurate size, 10mm, +/-0.05mm. Good for element collections and display.
  • Pretty looks, natural metal (element) color, hand-made metallic strips,matt surfaces.
  • Daily met elements, Al-99.99%, C-99.9%, Cu-99.95%, Fe-99.99%, Sn-99.99%, Ni-99.6%, Ti-99.5%, Zn-99.99% and Bi-99.99%.
  • 100% happy customer guranty and "Amazon Choice" good deal.
Check Stock

20 Sticks BLUEFIRE JAgP-5 1/2 lb 5% Silver Phos Copper Brazing Alloys Welding Rods Industry BCuP-3 0.050\x1/8\x14\ equivalent to HARRIS STAY SILV 5 Professional Grade Gas Soldering Torch Accessory

  • 5% Silver Bearing: USA AWS A58 Class: BCuP-3 brazing alloys rods. Contents: Silver (Ag) 4.8-5.2%.
  • Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux..
  • Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1189°F / 643°C, Liquidus Temperature: 1419°F / 771°C. Recommended Joint Clearance: 0.003"/0.006.
Check Stock

TIG Welding Tungsten Electrodes 2% Lanthanated Blue WL20 10-Pack 1/16

  • PERFECT for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and stainless steel.
Check Stock

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

  • Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
  • Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
  • Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
  • Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
  • brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check Stock

Midwest Tungsten Service TIG Welding Tungsten Electrodes 10-Pack Blue - 2% Lanthanated Tungsten WL20/EWLa-2 3/32

  • PREMIUM ten (10) pack of 3/32" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use.
  • HIGHEST RATED and most reviewed 2% Lanthanated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance..
  • EXCEPTIONAL for both AC & DC applications and for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and non-corroding steels.
  • UNITED STATES based manufacturing & knowledgeable customer service staff are here to help you pick the perfect TIG tungsten for your welding job, large or small..
  • FREE materials safety data sheet (MSDS) and certificate of conformance linked below, the tungsten electrodes adhere to American Welding Society standard A5.12M/A5.12:2036.
Check Stock

Tungsten Electrodes for Tig Welding 2% Grey Ceriated Tungsten Assorted- 5PCS 3/32 + 5PCS 1/16

  • Premium 10PK tig welding tungsten electrodes 2% ceriated gray WC20/EWCe-2, 5PCS 1/16" & 5pk 3/32" ceriated tungsten electrodes for tig welding.
  • The ceriated tungsten tig electrode is with high performance: No spitting,stable consistent arc starts and good stability with low burn-off rate..
  • The 2% ceriated tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length 2% grey ceriated tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

TEMCo TH0410 Rotary Cable Stripper Kit for THHN / XHHW 6 Gauge to 750 MCM (Compatible with any drill)

  • Cable Stripper will strip THHN / XHHW cable from 6 gauge to 750 MCM with varying insulation thickness..
  • Wire stripper can be used with any drill or cordless drill..
  • Includes bushings for 6awg CU/AL, 4awg CU/AL, 3awg CU, 2awg CU/AL, 1awg CU, 1/0 CU / 2/0 AL, 2/0 CU / 3/0 AL, 3/0 CU, 3/0 CU / 4/0 AL, 4/0 CU, 4/0-250MCM CU / 250MCM AL, 250MCM CU / 300MCM AL, 250-300MCM CU / 300MCM AL, 300MCM CU / 350MCM AL, 350MCM CU / 400MCM AL, 350-400MCM CU / 400MCM AL, 350-400MCM CU, 500MCM AL, 500MCM CU, 500MCM CU / 600MCM AL, 500-600MCM CU / 600MCM AL, 600MCM CU, 600MCM CU / 700MCM AL, 600-700MCM CU / 750MCM AL, 700MCM CU, 750MCM CU / 900MCM AL.
  • Each die has adjustable depth for changing insulation thickness.
  • Stripper can be adjusted to strip lengths up to 4” depending upon application..
Check Stock

Partol Carburetor Carb 2 Barrel Compatible with Ford Mustang F150 F250 F350 Comet Engine 289 Cu, 302 Cu, 351 Cu Wagoneer 360 Cu - Automatic Choke

  • Compatible with Ford Mustang 1968~1973 Engine 289 Cu, 302 Cu, 351 Cu / Ford F150 1964~1978 Engine 289 Cu, 302 Cu, 351 Cu / Ford F250 1964~1978 Engine 289 Cu, 302 Cu, 351 Cu / Ford F350 1964~1979 Engine 289 Cu, 302 Cu, 351 Cu / Ford Comet 1964~1982 Engine 289 Cu, 302 Cu, 351 Cu / Wagoneer 1964~1978 Engine 360 Cu.
  • Improve throttle response for better engine performance. Mounting gasket & seal included.
  • Add More Horse Power While Maintaining Near Stock Fuel Mileage Directly Replace the Old / Broken One.
  • Improve throttle response for better engine performance, add 5~10% horsepower and maintain near stock fuel mileage.
  • Part Number: 2100,A800. Package: 1x car carburetor..
Check Stock

NENKUTEN 2 Barrel Carburetor 2100 2150 A800 Carb for Ford 289 302 351 Mustang Cu Jeep Engine F100 F150 F250 F350 Jeep 360 Cu with Electric Choke Gasket Float Level Ruler

  • 【Premium Quality】: Brand New Premium quality 2 Barrel Carburetor 2100 2150 for Ford 289 302 351 Cu Jeep Engine F100 F250 F350 Jeep 360 Cu with Electric Choke, The carburetor is made of high quality aluminum alloy for durability, helping your car run at peak performance, 100% tested before shipment, perfect choice to replace your defective carb assembly..
  • 【Fits】: Fits for Ford Mustang Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1968-1973.
  • for Ford F100 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1978.
  • for Ford F150 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1978..
  • 【Fits】: Fit for Ford F250 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1978.
  • for Ford F350 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1979.
  • for Jeep Wagoneer Engine 360 cu in (5.9 L)1964-1978.
  • for Ford Comet Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1982..
  • 【Package】: 1x Carburetor, 1 x Mounting Gasket, 1 x Seal Ring, 1 x Float Level Ruler. As shown in the picture..
Check Stock

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

  • Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
  • Copper (Cu): Rest. For the best results..
  • Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
  • Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

GELUOXI Carburetor Two 2 Barrel Carburetor Carb 2100 2150 Compatible with Fo rd F100 F250 F350 Mus-tang Mer-cury 289 302 351 Cu Engine,Compatible with J-e-e-p Engine with Electric Choke

  • carburater Part Number: 2100A800 / 2100-A800. Package include: 1*Carburetor. 1*Mounting gasket. 1*Seal. All our accessories are professionally tested at the factory. Please make sure the project is suitable for your model before purchasing..
  • Compatible with: Fo-rd Mu-stang Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1968-1973.
  • Fo-rd F100 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1978, Fo-rd F250 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1978.
  • Je-ep Wa-goneer SJ Engine 360 cu in (5.9 L) V8 1964-1978..
  • Compatible with: 1964-1978 Je-ep Wa-goneer 360 Cu 5.9L.
  • 1968-1973 Fo-rd Mus-tang 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L.
  • 1964-1978 Fo-rd 100 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L.
  • 1964-1978 Fo-rd F250 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L.
  • 1964-1979 Fo-rd F350 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L.
  • 1964-1982 Mer-cury Comet 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L..
  • Compatible with: Fo-rd F100/F250/F350 with 289 302 may also know as 2-Barrel Carburetor, F250 Carburetor, F350 Carburetor, F100 Carburetor, 289 Carburetor, 302 Carburetor, 351 Carburetor, 351 Carburetor 2 barrel, 2100 carburetor, 2150 carburetor, 2100 Carb, 2bbl carburetor, 302 carb,carburetor 2 barrel f100, 2100 A800 carburetor..
Check Stock