Reviews Csr2 0 Chip

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

Hegebeck Carbide Hole Cutter, 22mm Carbide Hole Saw Tipped Tooth Round Hole Saw Drill Bit for 5mm Stainless Steel, Metal Plate, Iron, Aluminum

  • 【Parameter】- Hole Diameter: 22mm / 0.87inch.
  • 【Material】- Adopt carbide material, longer lasting performance, unique cutting-edge grinding technology, sharp and wear-resistant, not easy to break, drilling high efficiency and fast chip removal, extremely long service life..
  • 【Feature】- Fast cutting and chip removal, arc-shaped chip pocket design, conducive to the smooth discharge of iron filings, reducing chip jamming, and conducive to chip holding at the limit cutting depth.
  • Pilot drill spring design, control the displacement of the cutting edge, avoid damaging the drill bit by sudden cutting..
  • 【Wide Application】- Used with power drill, magnetic drills, benchtop drills to quickly and accurately cut stainless steel, sheet metal, cast iron, mild steel, aluminum.
  • Prohibit the use of ceramic tile, concrete, walls, stone..
  • 【Warm Tips】- Keep the drill running evenly at a low speed or pre-drill the center hole for extending hole cutter life. Please add coolant or water when working on stainless steel and steel metal sheets above 5mm..
Check Stock

AUTIDEFY 60pcs 0.3mm-1.2mm PCB Drill Bit Tungsten Carbide Micro Drill Bits Set for Print Circuit Board Jewelry CNC Engraving,Precision Drilling for Amber Plastic Hardware

  • ❤Multi Size:This PCB drill bit set contains 10 different size: 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1mm, 1.1mm, 1.2mm, each size has 6pcs.
  • ❤High-quality:Made of high quality tungsten steel, highly wear resistance, high hardness, bending strength, anti-impairment, with good milling and cutting performance, ensuring high efficiency..
  • ❤Large chip removal space for the drill bit: small chip removal resistance, smooth chip removal, low drilling heat, reducing drilling pollution..
  • ❤Extraordinary cutting edge sharpness: Due to the adoption of nanotechnology and advanced grinding technology, the cutting edge of the drill bit is sharper than before, which can reduce the cutting force, reduce the rate of broken drills, and improve the quality of the hole wall..
  • ❤Great Use:Great for 3D Printer Nozzle Cleaning, Amber beeswax, circuit boards, bakelite, CNC engraving plexiglass, jewelery, metal plastic and other precision drilling..
Check Stock

Foretra - Metallic Golf Poker Chip Magnetic Ball Marker and Removable Ball Marker – Putt for Dough – Money Maker

  • Unique - Putt for Dough / Money Maker - custom design.
  • Golf poker chip size:40mm (1.57”) Diameter, 4mm (.157”) Thickness.
  • Golf ball markers size: 24.4mm (0.96”) Diameter.
  • Golf poker chip’s weight: 26.6 gr (0.93Oz).
  • The small ball marker is easily removable to mark your spot when the poker chip may be in your playing partner’s line..
Check Stock

Aexit 200Pcs 1206 Fixed Resistors 3.2x1.6mm 220 Ohm 1/4W SMT Surface Mount Resistor Chip Arrays Chip Resistors

  • Size : 3.2 x 1.6 x 0.55mm / 0.13" x 0.06" x 0.02"(L*W*T).
  • Package Content : 200(±2%) Pcs x SMD Chip Resistor.
Check Stock

Natural Chip Stone Beads Multicolor 5-8mm About 400 Pieces Irregular Gemstones Healing Crystal Loose Rocks Bead Hole Drilled DIY for Bracelet Jewelry Making Crafting (5-8mm, Multicolor)

  • Material :Genuine Natural Chip Stone loose Beads,polished tumble small pebble chip stone, irregular shaped cutting, no calsp, hole drilled, perfert for jewelry making or art project, fit for most wires or thread.It’s can make fengshui Ornaments money tree,tree of life, 7 Chakra Jewelry,Bonsai Fortune Tree,stone bracelet necklace earring ,etc.
  • Size: Approx 0.1"-0.3"(5-8mm) for chip beads,Total about 150gram(5.29oz), hole size 1mm, Total length about 65”,about 230-400pieces chip beads,can make about 8 single bracelet.Shapes: Freeform Nugget Chips,Our Store Cmidy Direct Have more than 40 stone material color for you choose, Great selection of rock chips.welcome choose your like..
  • Quality: All chip beads finished with heat treating and surface polishing. Chip Stone Beads accordding with the EU Environmental Requirement Standard.Safty for your Heathy and Colorful for Your Life. stones are very pretty and smooth chips are tumbled smooth and have a nice glassy shine, The chip beads are well polished with hole, which is suitable for most of the elastic string.chip stone beads packing with box,Great Gift for crafting and Beading making jewelry..
  • Chip Stone Beads are not only for Making Beading Beaded Necklaces, but can be used to Nake Earrings, Bracelets, Yo....
Check Stock

Aexit 200 Pcs Fixed Resistors 0805 20K Ohm 1% Tolerance Surface Mount SMT Resistor Chip Arrays Chip Resistors

  • Package Content : 200(±2%) Pcs x Chip Resistors.
Check Stock

XINGYHENG 5 Piece High Speed Steel Hole Saw Drill Bit Aluminum Plate Hole Saw Cutting Kit Drill Bits Opener Cutter Tool Drilling Bit Set 16mm 18.5mm 20mm 25mm 30mm

  • 1.Different Size: 16mm/0.62'',18.5mm/0.73'',20mm/0.78'',25mm/0.98'',30mm/1.18'', interval for each specification), total length 65mm/2.55''..
  • 2.Cutting edge strictly symmetrical: Surface anti-rust treatment, smoother drilling and chipping.beneficial and efficient cutting, avoid offset drilling. Big space for chip removal, big space for chip removal, the chip resistance is small, the chip discharge is smooth, the heat generated by the hole is small, and the drilling is reduced..
  • 3.Extraordinary cutting edge sharpness: Hex shank, titanium plated on the surface, high temperature quenching to improve hardness. The cutting edge of the drill bit is sharper than before, which can reduce the cutting force, reduce the drilling rate and improve the quality of the hole wall..
  • 4.Made tungsten carbide bits, Using hard alloy (tungsten steel) material, with high hardness, high wear resistance, high strength, bending resistance, resistance to damage and other characteristics, complete specifications..
  • 5.Fit for: There are a wide variety of drills to meet different application needs. All parameters of the milling cutter, such as core thickness and core taper, have been carefully designed and effective. Perfect for Installing Locks, Knobs in Doors and Cabinets or Drilling....
Check Stock

Aexit 200 Pcs Fixed Resistors 0402 1K Ohm Resistance 1/16W Watt Film SMT SMD Resistor Chip Arrays Chip Resistors

  • Package Content : 200(±2%) Pcs x Chip Resistors.
Check Stock

Quefe 2360pcs 48 Colors Crystals Beads for Jewelry Making Kit, Ring Making Kit, Gemstone Chip Beads Irregular Natural Stone with Jewelry Making Supplies for DIY Craft Necklace Bracelet Earrings

  • Super-value kit: Contains about 1800 crystal chip beads, 100 earring hooks, 100 head pins, 100 eye pins, 30 lobster clasps, 80 buckles, 100 5mm jump loops, 50 random pendants, 2 rolls of 0.5mm Jewelry thread, 2 rolls of 0.5mm crystal thread and 1 pair of pliers..
  • Rich colors: The ring making kit has 48 different colors for you to choose from. The shape of the crystal chip beads is irregular, and the size is 5-8mm. Crystal chip beads with a wide range of types provide favorable conditions for you to make all kinds of jewelry and handicrafts..
  • Complete accessories: The crystal chip beads set comes with 10 different accessories. Most accessories include two colors of gold and silver, which are ideal for making earrings, rings, handicrafts, etc..
  • Wide range of uses: This jewelry making kit is suitable for making bracelets, earrings, rings, etc., and can form a unique style. It can also be used to make crafts as home decorations, so it is a perfect gift for family and friends..
  • Note: Most crystal chip beads are natural stones, each one is unique and well polished. A small part of the cr....
Check Stock

MasterPieces NHL Nashville Predators 100 Piece Poker Chips

  • Product dimensions (inches): 4 x 0.5 x 5.
  • Features include: Team logo on back of chip & Strong magnet to hold marker.
  • Set includes: 3 colored golf chip ball markers & 3 double sided enamel color fill magnetic markers.
  • Perfect for showing off your team spirit while on the green.
  • Great gift for the holidays, Father's Day, and special events!.
Check Stock