Reviews Crowfoot Wrench Sets

Neiko 03324A Crowfoot Wrench Set 1/2″ and 3/8” Drive, 15 Piece, Metric Crows Foot Wrench Sizes 8mm-24mm, Chrome-Moly Flare Nut Wrench Set

  • DUAL DRIVE SET: With 3/8” and 1/2” drive ratchets, extensions, or impact torque wrenches, you can utilize these flare nut wrenches where standard 6-point and 12-point sockets and wrenches simply cannot fit..
  • CROWS FOOT SHAPED: This flare nut wrench set includes 15 large sized crowfoot wrenches that resemble crows feet that are utilized in automotive repair work when reaching and holding nuts and/or boltheads in difficult spots on your car or vehicle..
  • PREMIUM GRADE Cr-Mo: Each metric crowfoot wrench is made of industrial grade, heat-treated, drop forged chrome molybdenum steel that creates an extremely tough tool and delivers a lot of turning power for those difficult angles..
  • CROWFOOT WRENCH HOLDER CASE: Each crowfoot wrench socket stores in a blow molded compartment in a high impact ABS case that allows for storage, efficiency and portability..
  • CROWFOOT SIZING: Each set includes precision crafted 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, and 19mm for 3/8-inch drive, and 21mm, 22mm, and 24mm for 1/2-inch drive for larger cars, trucks, or vehicles..
Check Stock

ZKTOOL 3/8” and 1/2” Drive Crowfoot Flare Nut Wrench Set, 19PC Metric Tool 8 to 32 mm Sizes ,Flare Nut Wrench set for 3/8in and 1/2in Drive Ratchet.

  • [FUNCTION]: Crows foot wrench set includes 19 size metric Crowfoot flare nut wrenches for 3/8" and 1/2" drive ratchet, extension or torque, 19 size claw adapter to extend the range of common wrenches, Allows you to reach awkward angles and hard-to-reach areas that a regular socket or wrench cannot..
  • [PACKAGE CONTENT]: Crowfoot wrench set includes (19) crowfoot wrenches – 3/8-inch drive 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm.
  • 1/2-inch drive 21mm, 22mm, 24mm,27mm,28mm,30mm,32mm.
  • Packed inside (1) storage case for your convenience..
  • [EXTENDED RANGE]: crowfoot adapter extends the reach of a standard wrench to inaccessible fasteners in tight spaces that you would not normally have access to. Once in place, your existing ratchet, extender or torque wrench will attach to the crowfoot drive hole to drive the fasteners. They are both 100% compatible with your existing metric 3/8” and 1/2” drive tools, so they can meet all your needs..
  • [HIGH QUALITY]: Made of industrial grade, heat treated, drop forged chrome molybdenum steel to ensure nut wrench set durability, maximum torque and longevity against rust and corrosion.
  • there are return tabs at the jaws, so You get better leverage and more grip, and they slide easily over yo....
Check Stock

ARES 33005 – 1/4-Inch Drive Spring Loaded Auto Adjusting Crowfoot Wrench – Adjustable Wrench with 5 to 11mm (3/16-Inch to 7/16-Inch) Coverage – Male and Female Square Drives for Increased Versatility

  • DESIGN: This auto adjusting crowfoot wrench is the perfect solution to your search for the right tool in the middle of the job. With spring loaded adjustable jaws that quickly adjust to fit the exact size needed and ratchet with each turn, this tool has enough coverage to replace wrenches ranging from 5 to 11mm (3/16-inch to 7/16-inch). Now you can tackle dozens of different jobs with this single tool..
  • QUALITY: Our crowfoot wrench’s adapter body and jaws are finished with manganese phosphate and chrome plated finishes, providing your tool with increased durability and protection against wear, tear, rust, and corrosion. Thanks to the wrench jaws’ serrated toothed design and heavy duty chrome vanadium steel construction, you can approach any job with confidence knowing your wrench will not slip or stick in use..
  • APPLICATIONS: Thanks to its male and female square drive ends, you can use this wrench flexibly with a wider variety of ratchets and extensions for added leverage and control. Whether you’re working on tie rod removal, plumbing jobs, or loosening and tightening hex nuts and bolts, this auto-adjusting crowfoot wrench has you covered on a wide variety of applications..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tool....
Check Stock

WORKPRO 3/8\ Drive Crowfoot Wrench Set, 10-piece Flare Nut Wrench Set, Metric 10-19mm, Steel Wrench With Storage Rail, Easily Access Hard-To-Reach Areas

  • High-Quality Crowfoot Wrench Set: Made of Chrome Alloy, these wrenches are more solid, durable, and corrosion-resistant..
  • 10 Pcs Common Metric Size: Metric sizes for 3/8" drive flare nut wrenches include 10, 11, 12, 13, 14, 15, 16, 17, 18, and 19 mm. Each wrench is engraved with dimensions for easy identification..
  • Convenient Storage: The secure storage rail contains 10 spring buckles, and each crowfoot wrench is buckled on the spring buckle. This design is very suitable for storage and taking..
  • Usage: WORKPRO crowfoot flare nut wrench set speeds up installation and removal. It fits perfectly on 3/8” drive ratchet, extension rod, or torque wrench. With easier access to fasteners in narrow spaces, 10 sizes meet more of your needs and make your job easier..
  • Wide Application: The set is very suitable for working on oil-circuit machinery. It is also suitable for lawn equipment, car automotive & truck work in tight engine/radiator areas & controls arms or for underneath sink/toilet work..
Check Stock

ARES 33009 – 3-Piece Spring Loaded Auto Adjusting Crowfoot Wrench Set – Adjustable Wrench Set with 5 to 32mm (3/16-Inch to 1 1/4-Inch) Coverage – Male & Female Square Drives for Increased Versatility

  • DESIGN: This auto adjusting crowfoot wrench set is the perfect solution to your search for the right tool in the middle of the job. With spring loaded adjustable jaws that adjust to fit the exact size needed and ratchet with each turn, these wrenches have enough coverage to replace a variety of wrenches. The 1/4-inch drive covers 5 to 11mm (3/16-inch to 7/16-inch), the 3/8-inch drive covers 8 to 17mm (5/16-inch to 11/16-inch), and the 1/2-inch drive covers 14 to 32mm (9/16-inch to 1 1/4-inch)..
  • QUALITY: Our crowfoot wrenches’ adapter bodies and jaws are finished with manganese phosphate and chrome plated finishes, providing your tools with increased durability and protection against wear, tear, rust, and corrosion. Thanks to the wrench jaws’ serrated toothed design and heavy duty chrome vanadium steel construction, you can approach any job with confidence knowing your wrench will not slip or stick in use..
  • APPLICATIONS: Thanks to their male and female square drive ends, you can use these wrenches flexibly with a wider variety of ratchets and extensions for added leverage and control. Whether you’re working on tie rod removal, plumbing jobs, or loosening and tightening hex nuts and bolts, this auto-adjusting crowfoot wrench set has you covered on ....
Check Stock

Powerbuilt 2 Piece Spring-Loaded Crowfoot Wrench Set, Adjustable, Auto Size, Universal, Self-Adjusting, Power Grip , Rapid Wrench- 240274

  • HANDY ADDITION: the 2- Piece Spring Crowfoot Wrench Set can do the work of multiple wrenches, leaving more space in your toolbag and speeding up your job by eliminating the search for those single sized wrenches.
  • WORK FASTER: The innovative crowfoot wrenches are spring loaded and auto adjusting to the size of the fastener.
  • the jaws ratchet back between turns eliminating the need to remove and replace the wrench when tightening or loosening fasteners.
  • REPLACES SEVERAL WRENCHES: This 2 piece set in 3/8 inch and 1/2 inch in combination have a wide usable working range.
  • 3/8 inch drive wrench jaw range is 5/16 inch to 11/16 inch.
  • 1/2 inch drive wrench jaw range is 9/16 inch to 1 1/4 inch.
  • MULTIPLE DRIVE OPTIONS: The wrench set has both male and female square drive options.
  • use a breaker bar, ratchet, or bar extension.
  • BUILT TOUGH: Made of tough Chrome Vanadium Steel for a lifetime of use.
Check Stock

Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser,by Lucky Seven

  • Oxygen Sensor Socket Wrench Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires，Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines..
  • 5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wr....
Check Stock

VCT 10 Pc 3/8' Drive Fully Polished Metric Flare Nut Crowfoot Wrench Set

  • 3/8 in. Drive Crowfoot Flare Nut Wrench Set includes 10 pieces of all sizes between 10mm and 22mm--the most common sizes used for automotive repair. Each wrench is made with drop forged alloy steel and designed with an open side and a 15-degree offset at each end. This set comes mounted on a storage rail for convenient transport and storage..
  • Includes 10 Crowfoot Flare Nut Wrenches from 10, 11, 13, 14, 15, 16, 17, 18, 19, 22mm.
  • Open side at each end allows for easy access over lines and tubing while still providing 5 sides for a maximum on fasteners.
  • 15-degree offset provides clearance for your fingers and other obstructions near the fastener.
  • Drop forged alloy steel material provides strength and comfort.
Check Stock

NEIKO 03325A ½” Drive Jumbo Crowfoot Wrench Set | 14 Piece | SAE | 1-1/16” to 2” | Cr-Mo Steel

  • [PRO QUALITY]: This professional grade set includes 14 high quality 1/2 inch jumbo crowfoot flare nut wrenches ranging in size from 1-1/16” to 2” for all your home and automotive jobs..
  • [DURABLE]: This wrench set is made of durable, industrial grade, heat-treated, drop forged chrome molybdenum alloy steel that won’t easily break nor rust to promote long-lasting service life..
  • [VERSATILE]: These open-end sockets are ideal for diesel and automotive maintenance in any car or truck garage and can be used with any 1/2" drive ratchet, extension or torque wrench to reach tight, narrow spaces or deep recesses where 6- and 12-point sockets just won’t fit..
  • [INCLUDES]: 14 jumbo sizes for 1/2" drive crowfoot wrenches ranging in size including 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1- 1/2", 1-5/8", 1-11/16", 1-3/4", 1-13/16", 1-7/8", and 2”..
  • [CONVENIENCE]: Includes a hard plastic blow-molded case for convenient storage and organization along with clearly marked identification on each wrench..
Check Stock

HYAT 5pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Ideal for removing and installing oxygen sensors and vacuum switches on vehicles with computer-controlled engines.
  • 3 Different types of sockets cover various situations of oxygen sensor locations.
  • Universal 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensor from any section and prevents damage to wires.
  • Set includes: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool

  • 【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • 【USE】 Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • 【Package】1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • 【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • 【Service】100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

5 PCS Automotive Oxygen Sensor Socket Wrench Removal Tool and Thread Chaser Set (Blue Case)

  • Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • Package1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads.
  • USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • Service100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock