Reviews Crossover In Bass

Precision Power E.7 1/2 DIN 7-Band Parametric Equalizer with LED Display

  • QUALITY - This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others..
  • 1 Ohm Stable - This SPL Audio Subwoofer Amplifier is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively..
  • Features – The monoblock bass boost amplifier has features like - Frequency Response: 15~150HZ, Bass Boost, SNR: >105DB, Remote Bass Knob, 2-way protection, Input Sensitivity: 200mV to 6V and THD:.
  • Power – This Class D 3000 Watt Amplifier has a power rating distribution as followed 1500 X 1 @ 1 OHM, 1000 X 1 @ 2 OHMS, 700 X 1 @ 4 OHMS. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Crossovers- The SPL Monoblock Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The monoblock car amplifier provides you with options of variable 50-400hz 12db low pass crossover, variable 17-50hz 12db subsonic crossover, ....
Check Stock

200W Pure Bass Subwoofer Crossover Second-Order Crossover Frequency Distributor Divider 2 Way Speaker Audio Crossover Filter

  • Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY.
  • Power: 200W (applicable to 4-inch to 8-inch subwoofer)..
  • Low Pass Speaker Bass Subwoofer Crossover Filter for 8 Ohm or 4 Ohm.
  • 2-Way Crossover Filters Frequency Distributor.
Check Stock

150W Frequency Divider 4~8 Ohm Ajustable Treble/Bass 2-Way Speaker Audio Crossover Filter for Subwoofer HiFi Speaker Home Car Audio Set DIY (2700Hz)

  • Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY.
  • Power: 200W (applicable to 4-inch to 8-inch subwoofer)..
  • Low Pass Speaker Bass Subwoofer Crossover Filter for 8 Ohm or 4 Ohm.
  • Pure Bass Subwoofer Second-order Crossover Frequency Divider.
Check Stock

Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's Bundle with Hifonics ZG-2400.1D ZEUS Gamma 2400 Watt Mono Amplifier Car Audio Class D Amp

  • ... minimal distortion. RCA Inputs: Nickel plated high temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant..
  • High Level Inputs: Easily tie into OEM audio systems that do not offer RCA output to maximize after market amplifier power. Operation Mode: Mono only. Crossover Type: Onboard electronic crossover. Electronic Equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Class/Topology: Class D, High efficiency with big power in a small footprint..
  • Output Device Technology: "PWM MOSFET Power Supply, Stable power through the PC board with minimal heat generation. Heat Sink: Aluminum, Old School Hifonics Heat sink for Superior Heat Dissipation. Power Supply: Simpatico Coil Design,The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices. Output Connections: RCA Outputs, Daisy chain multiple amplifier to eliminate additional signal cables from the source unit..
  • Connection Type: Secure molded connection terminal for all Power, Ground and Speaker connections. Angled for ease of access while creating a clean wire mangement profile. LED System Protection Circuitry Diagnostics: Mo....
Check Stock

Boss Up (feat. Teddythelegacy) [Explicit]

  • ...o strap two OX4.600 amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Fixed High-Pass Crossover - Speakers reproduce sound based on high, low or mid-range frequencies. The High-Pass Crossover gears specifically towards “highs” in all size speakers including mid ranges and tweeters.
  • Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Specs - Dimensions: 16.22” x 6.89” x 2.22”, Weight: 7.32 lbs., Speaker Impedance: 2 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 90 dB, Frequency Response: 10 Hz to 30 kHz, Fuse Quantity: 2 35 Amp ATO Blade.
Check Stock

Precision Power SPL 4 Channel Car Amplifier – Class A/B Multichannel Amplifier 2000 Watt Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply for Car Speakers Sub Amp

  • Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 15-20KHZ, THD: < .05%, Bass Boost, SNR: 105DB, Remote Bass Knob, 2-way protection, hi/low pass crossovers and Input Sensitivity: 200mV-6V.
  • Class A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 2000 Watt Car Amplifier has a power rating distribution as followed 250x4 @2 Ohms, 180x4 @4 Ohms, 500x2 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Crossovers- The SPL Multichannel Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you with options of variable 60-1.2kHz 12db high pass crossover, variable 50-400Hz 12db low pass crossover ....
Check Stock

AUTOTEK MM4020.1D Mean Machine 4000w Mono Car Stereo Amplifier+Amp Kit Class D

  • Package Includes: (1) Autotek MM4020.1D Mean Machine 4000 Watt Mono Amplifier Car Stereo Amp Class D. (1) Rockville RWK41 4 Gauge Complete Wire Kit....
  • Crossover: Electronic. Variable Low Pass Crossover (12 dB Per Octave): 40Hz - 300Hz. Tone Control/Parametric EQ: Built-In Bass Control. Class: D. Bass....
  • Low Noise Pre-Amplifier Circuitry: Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which....
  • Electronic Equalizer: Electronic equalizer provides control of amplifier output with onboard electronic crossover to tailor specific frequencies to....
  • Heat Sink: Heavy-duty aluminum alloy heatsink with illuminated connectors provide a blue wash of light from the heat sink underside. Power Supply:....
Check Stock

Pair Rockville X6.5C Competition 6.5

  • Features: Pair Rockville X6.5C Competition 6.5" 1000 Watt Component Car Audio Speakers and Titanium Tweeters, (2) 6.5 Woofers for Mids and Bass, (2) 2 Aluminum Tweeters with Titanium Diaphragms, (2) Audiophile Crossovers (these are very expensive crossovers with a lot of copper coils in them for advanced sound filtering to give you the best sound quality), Peak Power Rating: 1,000 Watts Per Pair/500 Watts Each, CEA Compliant RMS Rating: 250 Watts Per Pair/125 Watts Each.
  • Paper Woofer Cone With Cloth Edge Gives Amazing Bass and Mids, True Aluminum Bullet to give the woofer amazing sound, Steel Stamped Basket, Oversized 1.5 ASV Voice Coil, 14 oz. High Quality Ferrite Magnet, Cutout Diameter: 5.78 inches, Impedance: 4 Ohms, Tweeter Size: 3.86' x 1.97 inches, Cutout Diameter of Tweeter: 2.80inches, Audiophile 2-Way Crossover with 12db/Octave Roll-Off, Crossover Has Tweeter Attenuation Adjustment of -3db, -6db, Frequency Response: 40Hz 20,000 Hz.
  • Sound Pressure Level: 90dB @ 1w/1m, Fs: 110 Hz, Re: 3.6 Ohm, Qes: 1.024, Qts: 0.865, Qms: 5.579, Titanium Diaphragm Tweeter with 1 Kapton Voice Coils - the most premium voice coils on the market, This item uses CCAW voice coil windings which is the most expensive and best material for voice coil winding, Pre-insta....
Check Stock

DS18 XM6LD 6-way Active Crossover - High/Low Pass, 2, 4, or 6 Channel Selector, with Remote Subwoofer Control - Perfect Frequency Distribution System Ensures Clarity and Peak Efficiency, BLACK

  • BALANCE ACTIVE SPEAKERS PERFECTLY - DS18's active crossover will help you divide frequencies with ease, making sure your tweeters, mid-range, and subwoofers all receive the correct levels every time..
  • UNCOMPROMISING FLEXIBILITY AND DESIGN - 6 channels with 2,4,6 channel selector. 12 channel /6 way RCA output at 11.5V. High/low/band pass crossover 12dB/Oct.
  • BASS KNOB INCLUDED - The XM6LD Crossover comes with a remote bass knob included. Always have control over the bass levels depending on what genre music you're listening to..
  • COMPETITION LEVEL CONTROL - You'll quickly see the advantages of an active crossover and why almost every competition-level car audio system incorporates this unit..
  • NEVER STOP INNOVATING ATTITUDE - DS18 stands out from other brands with our progressive designs and unwavering commitment to delivering the most technologically up-to-date products on the market..
Check Stock

Q Acoustics 3010 Compact Bookshelf Speakers (Pair) (Graphite)

  • These “What Hi-Fi?” award-winning, ultra-compact 3010 speakers achieve outstanding performance by utilizing the 3000 Series, 2-in-1 concentric advanced ring dome tweeter, Aramid fiber/paper cones for the 4-inch bass unit, uprated audiophile crossover components and a stronger, lower resonance cabinet.
  • Enclosure: 2-way reflex. Bass Unit: 100mm. Treble Unit: 25mm.
  • Sensitivity: 86dB. Recommended Power: 15-75w. Crossover Frequency: 2.8kHz.
  • Frequency Response (+/-3dB): 68Hz-22kHz. Normal Impedance: 6 ohm. Minimum Impedance: 6 ohm.
  • Box includes: 2) Q Acoustics 3010 Bookshelf Speakers (Graphite), (2) Magnetic Speaker Grills, (2) Port Bungs, (1) User Manual, (8) Rubber Speaker Grips.
Check Stock

Hifonics A3000.1D ALPHA Compact 3000 Watt 1 Ohm Stable Monoblack Car Audio Amplifier

  • Low Noise Preamplifier Circuitry - Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process..
  • RCA Inputs - XXX style RCA connectors for audiophile signal quality and maximum signal throughput with minimum distortion and maximum external noise rejection..
  • Crossover Type - Accu-Cross crossovers allow for complete control of the signal directing to all speakers. See specifications section for specific frequencies.
  • Electronic Equalizer - Control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier..
  • Bass Remote Included - Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle. Smooth potentiometer and ringed illumination in a satin black mount create a custom look..
Check Stock

Hifonics 4 Channel Car Amplifier – Class A/B Gemini Series Multichannel Amplifier 1400 Watt Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost MOSFET Power Supply for Speakers Sub Amp

  • ... followed 350x4 @2 Ohms, 175x4 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 10-22KHZ, Bass Boost, Remote Bass Knob, 2-way protection, variable low pass crossover: 40Hz-300Hz, variable high pass crossover: 40Hz-300Hz, subsonic filter:10Hz-40Hz, phase shift:0-180 degree, and ultra-fi mosfet power supply.
  • Class A/B – This multichannel subwoofer car amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • RCA Ports - The RCA Jacks in this bass boost car amplifier allows you to develop multiple amplifier systems without using any splitter cords. The subwoofer amplifier thus puts you at ease as you just have to bring one set into the first amp and then use the line out rca....
Check Stock

Zapco Dash Mount EQ with 3-Way Equalizer/Crossover - Overall System Volume w/Separate Bass Level Control Fader Control Auxiliary Input Individual Channel Gains Push-in Control Knobs etc

  • DASH MOUNT EQ WITH 3-WAY EQUALIZER/CROSSOVER: The Zapco in-dash processors have built a reputation for unsurpassed sound quality. The new design will continue Zapco's reign as the leader in high performance analog processors..
  • DESIGN & OUTPUT: In re-designing the unit we had 3 goals. First and foremost was to set a new standard for sound quality. Secondly we added some features that were missing from the previous models. And third, we wanted to simplify the operation of the EQ's features..
  • TOP PANEL FEATURES: Top panel controls allow you to set the system up for Sub + Front and Rear full range or Sub + dual high pass outs, or for an active 3-way system with a bandpass on the mid-range or Mid-bass..
  • ALL IN 1: Separate bass level control to balance the bass output to the rest of the system. Fader control - to balance front output to rear output, or midrange or mid-bass to the highs. Auxiliary input for your iPod or other portable source. Five bands of semi-parametric equalization. Each of the five bands has a variable center frequency so you can fix. Individual channel gains for both Main-in and Auxiliary-in. 9.5 Volts of preamp output to make your amps sound their very best..
  • SPECIFICATIONS: 1/2 Din, Dash Mounted, Equalizer/Crossover 9.5 Volts Preamp ....
Check Stock