Reviews Creality Nozzle

CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm fit for Creality 3D Printing Printer CR-10 CR-10S S4 S5

  • Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY.
  • MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS.
  • CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 CR10 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W..
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

Sunhokey Extruder Assembled MK8 Hot End Kit for CR10 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle(12V 40W)

  • High-quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5..
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle..
  • MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 12V 40W..
  • Tip of the nozzle, aluminum heating block, throat pipe ..
Check Stock

Official Creality Ender 3 V2 3D Printer with Upgraded 32-bit Silent Motherboard Carborundum Glass Platform Resuming Printing Function Free Filaments & Nozzles 220x220x250MM New User Interface

  • Upgraded 32-bit Silent Motherboard: This Creality Ender-3 V2 3D Printer is equipped with Advanced Built-in 32-bit Silent Motherboard. The printer....
  • Resume Printing Function: Ender-3 V2 supports resume printing from the last recorded extruder position after suffering unexpected power outages or....
  • Working Temperature: It only takes about 1 Minute to heat up Temperature of the nozzle and the hot bed. Suggested setting: 210 degree of nozzle &....
  • UL Certified Meanwell Power Supply: The printer comes with UL Certified Meanwell Power Supply which provides fast heating and longer printing.....
  • Official Creality 3D Amazon Shop: All of our printers are delivered from official creality 3D Amazon shop with considerate 24 Hours After-Sales....
Check Stock

Creality Ender 3 Pro 3D Printer with UL Certified Power Supply Removable Build Surface Plate Resume Printing Function Free Filaments & Nozzles FDM DIY 3D Printers 32bits Mainboard 220x220x250MM

  • Resume Printing Function: This Creality Ender-3 Pro 3D Printer supports resume printing from the last recorded extruder position after suffering unexpected power outages or your stopping printing. Ensuring excellent printing effect & use experience for you..
  • Removable Magnetic Hot-bed Surface: The Ender-3 Pro 3D Printer is assembled with removable magnetic hot bed surface for good adherence and easy removal of models. No need to spatula or razor models after printing..
  • 32-bit Motherboard: The Printer is equipped with Advanced built-in 32-bit motherboard. The printer won’t disturb your work or rest during printing, no noise with great printing effect..
  • Working Temperature: It only takes about 1 Minute to heat up Temperature of the nozzle and the hot bed. Suggested setting: 210 degree of nozzle & 50-60 degree of hot bed for using PLA/ ABS Filament, 245 degree of nozzle & 60-65 degree of hot bed for using TPU/PETG Filament..
  • Official Creality 3D Amazon Shop: All of our printers are delivered from official creality 3D Amazon shop with considerate 24 Hours After-Sales Services including original part replacement For Free and technology consult, ensuring remarkable user experience! Pls Contact us At Any Time if you need any help here!.
Check Stock

Creality Ender PLA 3D Printer Filament Dimensional Accuracy +/- 0.03 mm 1 kg 2.2 LBS Spool 1.75 mm Black

  • 【Who doesn't cherish his reputation】As a well-known brand in 3D printing, Creality is committed to creating excellent printing experience for....
  • 【Made of Corn Starch Materials】Non-toxic, No irritating smell and can be naturally degraded safer for children or students operating. Suitable for....
  • 【Tangle Less,Clog-free, Bubble-Free】Creality Ender PLA 3D Printer Filament 1.75mm, PLA 1.75 Dimensional Accuracy +/- 0.02mm. Full Mechanical....
  • 【High Compatibility with most 3D printers 】Creality Ender PLA filament works ferfectly with most FDM 3D printers on the market, Such as Ender 3,....
  • 【Recommend Settings】PLA Filament Extrusion/Nozzle Temperature 190-220℃, Bed 55℃-60℃. Creality Ender 3D Filament is the Most Common Used....
Check Stock

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

  • ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
  • 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
  • ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

MK8 Extruder Hotend 3D Printer Assembled kit for CR-10/CR-10S/CR-S with Aluminum Heating Block 1.75mm, 0.4mm Nozzle

  • 100% original and high quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality CR-10 CR-10S S4 S5 3D Printer.
  • This CR-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
  • With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect..
Check Stock

Creality Official PLA 3D Printer Filament, 1 KG Spool (2.2lbs), Dimensional Accuracy +/- 0.03 mm, 1.75mm, Fit Most FDM Printer (Black)

  • 100% Creality Original: Unlock your creativity with our hassle-free PLA Filament! Creality premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • FILAMENT SPECS: SIZE: 1 kg (2.80 lbs) Spool, 1.75 mm Filament Diameter (Dimensional Accuracy +/- 0.03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 195°C - 220°C..
  • TOP QUALITY 3D PRINTING FILAMENTS: Clog, bubble and tangle-free! Creality PLA Filaments is vacuum-sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution. PLA is formulated to offer minimal warping and little to no odor without the use of a heated bed..
  • Eco-Friendly & Wide Compatibility: Made from starch raw materials derived from renewable plant resources, PLA filament boasts complete biodegradation and lower melting temperature, even does not need a heated bed. No odor, no pollution and non-toxic during the printing. Creality PLA Filament Compatible perfectly with most FDM 3D Printers that use 1.75MM filament such as Creality Ender 3/5/CR-10 series, Prusa, Makerbot, MK3, Mega, Chiron, Monoprice FlashForge and more..
Check Stock

Creality Ender 3 Original Extruder Assembled MK8 Hot End Kit for Ender 3 3D Pinter with Aluminum Heating Block and 0.4mm Nozzle

  • Creality 100% original and brand new Hot End Kit for Creality Ender 3, Ender 3X, Ender 3 Pro..
  • Work with different sizes of MK8 nozzles: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzles..
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V..
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)..
  • Suitable For Creality Ender 3, Ender 3X, Ender 3 Pro..
Check Stock

ENOMAKER Creality Sonic Pad in Klipper Firmware 64-bit 3D Printing Smart Pad 7" Touch Control Screen Speed Up Printing Remote Control for Creality Ender 3 V2，Ender 3 S1/Pro and Other FDM 3D Printers

  • 【64-bit Strong Computing Power】The Creality Sonic Pad features a large 7" color touch control screen and the Klipper firmware runs fully on a powerful 64-bit computing platform that delivers amazing performance. With hardware and software integration, you'll get the best experience with less hassle..
  • 【Advantages of Klipper Firmware】It is able to achieve high-precision stepper motor motion control, thus ensuring the stability of the printer at a faster 3D printing speed. The unique pressure compensation function is to reduce the nozzle overflow by compensating the pressure inside the nozzle. Resonance suppression can reduce the system vibration and reduce the striations on the model surface..
  • 【Speed up Printing without Qaulity Loss】This 3d printing Pad uses precise algorithms to control the motors for faster printing speed. The built-in input shaper function will mitigate oscillation during high-speed printing and keep the model quality smooth..
  • 【Wide Compatiblity】The Creality 3d pad is compatible with most FDM printers that come with a USB interface. The user-defined printer compilation function is....
Check Stock

Creality 10 Packs 3D Printer Hardened Steel MK8 Nozzles, Upgraded Tungsten All Metal Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm for Creality Ender 3 Ender 3 V2 Ender 3 pro CR-10

  • ...higher print speed in same print precision. Avoid clog during printing, easy to clean. Made with centering CNC precision automatic lathe and with one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability & Compatibility] - Our Creality Nozzles are compatible with almost all FDM printer, also fits for MK8 heating block. Our tungsten nozzles are also designed for 3D Printer Makerbot Creality Ender 3 series and CR-10 series 3D printer, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original..
  • [Package] Package comes with 10 pieces of different size MK8 nozzles, include 8 pcs brass nozzles (0.2/0.3/0.5/0.6mm each 1pcs, 0.4mm nozzle 4 pcs)+ 2pcs black hardened steel nozzles 0.4mm. NOTE: Small accessories, please keep away from children..
Check Stock

Creality 3D Printer Ender 3 S1 Pro 300℃ High-Temp Nozzle Sprite Full Metal Direct Drive Extruder CR Touch Auto Leveling PEI Bed Filament Sensor Printing Size 10.6X8.6X8.6inches

  • 【High-temp Passion, Good with Multiple Filaments】: For creality ender 3 s1 pro 3d printers, the most attracting thing is its good performance under high-temp conditions. The nozzle made of brass can stand up to 300℃ printing. It is compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, creating numerous possibilities for the imagination. There is no need to change the nozzle even printing with different filaments, which is time-saving with enhanced efficiency..
  • 【“Sprite”, Small but Powerful】: Creality 3d printers uses the self-developed “Sprite” full Metal Dual-gear Direct Extruder. Same as its name, “Sprite”, it is small but powerful - weighing only 334g, but the extrusion force can be up to 80N. It enables smooth feeding when printing with diverse filaments, including those flexible materials, providing users with a stable and reliable printing journey..
  • 【Hassle-free Leveling】: This creality 3d printer equipped with CR Touch, the automatic leveling ensures perfect leveling by measuring the distance between the nozzle and the heat bed and accurately completes compensation. Therefore, Ender-3 S1 Pro is friendly,....
Check Stock

Creality 3D Hardened Steel MK8 Nozzle with High Temperature Resistance Upgraded Tungsten All Metal Nozzle Ends for Makerbot Ender 3 / Ender 3 S1, CR-10 Series, 0.2/0.3/0.4/0.5/0.6 mm (5pcs in One Set)

  • ...th higher print speed in same print precision.Not easy clog during printing, easy to clean. Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability and Compatibility] Our Creality Ender-3 S1 Nozzles suit to almost all FDM printer,could install to MK8 heating block. Our tungsten nozzles fit for 3D Printer Makerbot Creality Ender 3 series and CR-10 series 3D printer, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original..
  • [Package] Package comes with 5 pieces of black different size MK8 nozzles, the size is 0.2mm/0.3mm/0.4mm/0.5mm/0.6mm, sufficient quantity and size to facilitate your timely replacement, achieving quality printing..
Check Stock