Reviews Crankshaft Repair Kit

Valeo 52285615 Solid Flywheel Conversion Kit Compatible with Select Audi and Volkswagen Models

  • The same installation time as a Dual Mass Flywheel kit - no special tools required..
  • All new components provide better thermal resistance and full engine gearbox protection.
  • The lightweight kit increases torque transfer efficiency and reduces torsional stress on the crankshaft.
  • Notably reduces the cost of repair when compared to the DMF Kit.
  • Kit contains everything needed to complete the job: Rigid flywheel, flywheel bolts, long travel damper disc, cover assembly, pressure plate bolts, release bearing or CSC and centering tool (available for most popular items).
Check Stock

Valeo 52285616 Solid Flywheel Clutch Conversion Kit Compatible with Select Volkswagen Jetta Golf Beetle and Rabbit Models

  • The same installation time as a Dual Mass Flywheel kit - no special tools required..
  • All new components provide better thermal resistance and full engine gearbox protection.
  • The lightweight kit increases torque transfer efficiency and reduces torsional stress on the crankshaft.
  • Notably reduces the cost of repair when compared to the DMF Kit.
  • Kit contains everything needed to complete the job: Rigid flywheel, flywheel bolts, long travel damper disc, cover assembly, pressure plate bolts,....
Check Stock

2009-2018 Subaru WRX STi Nitride Treated Hardened Crankshaft EJ257 2.5L 12200AA430 OEM GENUINE

  • 【Compatible】The crankshaft rear main seal & wear sleeve installer & remover tool kit compatible with Cummins ISX QSX ISX15 ISX12 diesel engines. Replaces OEM 3164780 3162994. Replace multiple seals including 4965569..
  • 【Features】Designed for easy removal and correct installation of the crankshaft rear seal and wear ring/sleeve on diesel engines..
  • 【Advantage】This crankshaft rear main seal & wear sleeve installer & remover tool kit helps reduce the risk of damage to the crankshaft seal surface during disassembly. In addition, the rear seal and wear ring will be automatically installed to the appropriate depth using this special tool 3164780 to prevent damage to the rear seal and leakage..
  • 【Quality】The crankshaft rear main seal & wear sleeve installer & remover tool kit is manufactured by an ISO-certified manufacturer, made of high-quality materials, and meets or exceeds OEM requirements. 100% factory tested, and durable..
  • 【Warranty】2 years warranty for the The upper gimbal steering arm shaft kit! When you have any questions about our products, please feel free to contact us, we will provide the best service..
Check Stock

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

  • ...hreads to clean and rethread spark plug ports on a BMW vehicle and some Nissan and Toyota engines.
  • As long as the head is aluminum and the spark plug hole is straight with room to turn the tap using either a ratchet or wrench, this kit will allow you to repair plugs without removing the head.
  • EASY TO USE: Rotate the crankshaft to make sure no ports/valves are open, use the tap to install new threads, choose the proper depth of insert, and screw it firmly into the newly tapped head.
  • Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
  • PERFECT SIZE: 14mm reamer with 12 points.
  • Use with 3/8-inch drive ratchet or wrench.
  • Inserts sizes are 3/8-Inch, 7/16-Inch, 1/2-Inch, and 3/4-Inch.
  • Tap is tapered to allow the tip to fit and rethread the hole in order for the coil to fit.
  • Measure your plug diameter, thread, and pitch to see if this kit is compatible.
  • PACKAGE CONTENTS: Rethread kit includes a tapping reamer and 4 different depths of inserts for your convenience.
Check Stock

Orion Motor Tech Harmonic Balancer Puller Kit, Power Steering Pulley Puller Installer Tool Set, Automotive Steering Wheel Puller Tool Kit, Flange Type Gear and Crank Puller Set

  • GEAR PULLER SET: This Orion Motor Tech tool kit removes universal harmonic balancers, gear pulleys, steering wheels, crankshaft pulleys, and more for easy automotive repair and maintenance.
  • COMPLETE 49-PIECE SET: This gear puller kit includes a steel yoke, a pressure screw, 3 adaptors, and 30 bolts in the most needful SAE and metric sizes—1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, M8x1.25, and M10x1.5—to suit your different needs.
  • the 4-slot yoke also allows you to use it for two or three-slot operation with ease.
  • DURABLE PERFORMANCE: Each of these crank puller tools is constructed from hardened 45# steel while the centering adaptors are further heat-treated and anodized for the necessary strength to get your work done right.
  • all metric bolts are blackened and all SAE bolts are chrome-plated for easy identification, offering you years of outstanding dependability and superior corrosion-resistant service.
  • SCRATCH-FREE OPERATION: Thanks to the well-designed yoke, pressure screw, and washers, pressure is evenly distributed to pulleys for safe and worry-free servicing.
  • WIDE COMPATIBILITY: Including stepped bolts for 1990 and newer GM 3300-3800 V6 crankshaft pulleys, this harmonic balancer tool kit works on most cars, pickups, and SUVs in the market.
Check Stock

Campbell Hausfeld 120 Gallon Horizontal Two-Stage Air Compressor (CE8003)

  • 120 GAL. tank, 52.4 CFM at 90 psi, 175 maximum psi, 208-230/460-Volt, 41.1-37.2/18.7 Amp, 3 phase, 60 Hz.
  • Ideal compressor for auto repair facilities & tire repair outlets with the ability to power multiple air tools.
  • 2-stage pump that’s designed to deliver more than 15,000 hours of operation.
  • Viton(r) high-temperature O-rings for superior high-pressure sealing when compared to paper gaskets.
  • For smooth, low-vibration operation, the crankshaft is fabricated of ductile iron and optimally balanced.
  • bundle this unit with a Campbell Hausfeld 50 ft. Air Hose (PA121600AV), 17 Piece Accessory Kit (MP284701AV), and the 3-in-1 inflation gun, chuck and gauge (MP600000AV).
Check Stock

Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

  • ... Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
  • fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
  • Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
  • Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
  • Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley tool can be perfectly adapted to the engine, worked exactly as the OEM tools, and we offer 12 month warranty, let you order no worry.
Check Stock

The American Queen

  • 【PRODUCT FEATURES】Quality water pump automotive product to make your car safe. The crankshaft to ensure that the pistons and valves operate together in proper sequence, helps the motor run properly and enhances fuel efficiency.
  • 【Compatible】Water pump timing belt kit fits for Honda Accord Pilot Odyssey Ridgeline Crosstour Acura TL V6 and also Acura RDX MDX RL TL TSX ZDX. Not applicable for 2015 Hond Crosstour （belt oe: 31110-5G0-A01）.
  • 【Kit Include & Replacement OE】1 x Timing Belt (oe: 14400-RCA-A01), 1 x Tensioner Roller (oe: 14510-RCA-A01), 1 x Hydraulic Tensioner (oe: 14520-RCA-A01), 1 x Idler Pulley (oe: 14550-RCA-A01), 1 x Front Crankshaft Seal (oe: 91212-R70-A02), 2 x Camshaft Seals (oe: 91213-R70-A01), 1 x Serpentine Drive Belt (oe: 38920-RCA-A01, 6PK2135), 1 x Water Pump & Gasket (oe: 19200-RDV-J01).
  • 【Special Reminder】If the belt is damaged, it may be due to one of the two gears stop working and the tension on the other side causes breakage, don't worry, please contact us in time to help you solve the problem together.
Check Stock

Vals e Lönn

  • APPLICATIONS - Compatible with Cummins ISX12, X15 and ISX15 engines with single overhead cam.
  • BENEFITS - Use to remove and install front crankshaft seal and wear sleeve without damaging the seal and leakage.
  • REPLACEMENT - This is a high-quality aftermarket product. Directly replace part numbers 4918991. Each part is manufactured to OEM specifications and....
  • QUALITY - Advanced CNC machined heavy duty steel with black anodized finish.
  • INCLUDES - The 4918991 crankshaft seal kit includes:(1)Sleeve Remover.
Check Stock

VMS RACING 94-97 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1994-1997 1.8L BP-ZE Engines ONLY OEM SIZE (uses same belts)

  • APPLICATION ENGINE -- 3.0Lt AJ-126/306PS, 5.0Lt AJ133/508PS, 508PN. Replace OEM 303-1437.
  • FOR VEHICLE MODEL -- For Jaguar vehicle applications include: F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 - 2018, For Land Rover vehicle applications include: Discovery 4/Discovery, For Range Rover, Range Rover Sport 2009 - 2018..
  • FUNCTION -- Set of tools required for the removal and installation of the front crankshaft pulley(Crankshaft Vibration Damper) for Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines. A must have for removing and installing for land rover jag crank pulley..
  • BENEFITS -- The crankshaft pulleys used on these engines are tightened to 200 Nm + 270 degrees, so are very tight to undo. This kit helps hold the pulleys tight. Also included in the kit are the puller component’s required to remove the pulley without damage..
  • SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!.
Check Stock

The Mystery of the Great 4/7 Swap

  • 【PRODUCT FEATURES】Quality water pump automotive product to make your car safe. The crankshaft to ensure that the pistons and valves operate together in proper sequence, helps the motor run properly and enhances fuel efficiency.
  • 【Compatible】Water pump timing belt kit fits for Honda Accord Pilot Odyssey Ridgeline Crosstour Acura TL V6 and also Acura RDX MDX RL TL TSX ZDX. Not applicable for 2015 Hond Crosstour （belt oe: 31110-5G0-A01）.
  • 【Kit Include & Replacement OE】1 x Timing Belt (oe: 14400-RCA-A01), 1 x Tensioner Roller (oe: 14510-RCA-A01), 1 x Hydraulic Tensioner (oe: 14520-RCA-A01), 1 x Idler Pulley (oe: 14550-RCA-A01), 1 x Front Crankshaft Seal (oe: 91212-R70-A02), 2 x Camshaft Seals (oe: 91213-R70-A01), 1 x Serpentine Drive Belt (oe: 38920-RCA-A01, 6PK2135), 1 x Water Pump & Gasket (oe: 19200-RDV-J01).
  • 【Special Reminder】If the belt is damaged, it may be due to one of the two gears stop working and the tension on the other side causes breakage, don't worry, please contact us in time to help you solve the problem together.
Check Stock

Manifolds or Headers for Your Turbo LS?

  • 【PRODUCT FEATURES】Quality water pump automotive product to make your car safe. The crankshaft to ensure that the pistons and valves operate together in proper sequence, helps the motor run properly and enhances fuel efficiency.
  • 【Compatible】Water pump timing belt kit fits for Honda Accord Pilot Odyssey Ridgeline Crosstour Acura TL V6 and also Acura RDX MDX RL TL TSX ZDX. Not applicable for 2015 Hond Crosstour （belt oe: 31110-5G0-A01）.
  • 【Kit Include & Replacement OE】1 x Timing Belt (oe: 14400-RCA-A01), 1 x Tensioner Roller (oe: 14510-RCA-A01), 1 x Hydraulic Tensioner (oe: 14520-RCA-A01), 1 x Idler Pulley (oe: 14550-RCA-A01), 1 x Front Crankshaft Seal (oe: 91212-R70-A02), 2 x Camshaft Seals (oe: 91213-R70-A01), 1 x Serpentine Drive Belt (oe: 38920-RCA-A01, 6PK2135), 1 x Water Pump & Gasket (oe: 19200-RDV-J01).
  • 【Special Reminder】If the belt is damaged, it may be due to one of the two gears stop working and the tension on the other side causes breakage, don't worry, please contact us in time to help you solve the problem together.
Check Stock

Straight Exhaust vs. H-Pipe vs. X-Pipe!

  • 【PRODUCT FEATURES】Quality water pump automotive product to make your car safe. The crankshaft to ensure that the pistons and valves operate together in proper sequence, helps the motor run properly and enhances fuel efficiency.
  • 【Compatible】Water pump timing belt kit fits for Honda Accord Pilot Odyssey Ridgeline Crosstour Acura TL V6 and also Acura RDX MDX RL TL TSX ZDX. Not applicable for 2015 Hond Crosstour （belt oe: 31110-5G0-A01）.
  • 【Kit Include & Replacement OE】1 x Timing Belt (oe: 14400-RCA-A01), 1 x Tensioner Roller (oe: 14510-RCA-A01), 1 x Hydraulic Tensioner (oe: 14520-RCA-A01), 1 x Idler Pulley (oe: 14550-RCA-A01), 1 x Front Crankshaft Seal (oe: 91212-R70-A02), 2 x Camshaft Seals (oe: 91213-R70-A01), 1 x Serpentine Drive Belt (oe: 38920-RCA-A01, 6PK2135), 1 x Water Pump & Gasket (oe: 19200-RDV-J01).
  • 【Special Reminder】If the belt is damaged, it may be due to one of the two gears stop working and the tension on the other side causes breakage, don't worry, please contact us in time to help you solve the problem together.
Check Stock