Reviews Crankshaft Pulleys
Oh L'amour - Thomas Tank Engine Sleeve
- Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
- Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
- The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
- Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
- Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..
Check StockOTC 4754 Universal Pulley Holder Wrench with Interchangeable pins
- Universal design fits many different sized pulleys having slots or holes, such as camshaft pulleys and crankshaft pulleys.
- Wrench is adjustable from 1-1/2 to 8-5/8 inches, allowing it to work with a wide variety of pulleys.
- Includes 4 different sets of interchangeable step pins.
- Long handle enables you to easily hold the pulley when tightening or loosening retaining bolts.
- Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them.
Check StockOrion Motor Tech Harmonic Balancer Puller Kit, Power Steering Pulley Puller Installer Tool Set, Automotive Steering Wheel Puller Tool Kit, Flange Type Gear and Crank Puller Set
- GEAR PULLER SET: This Orion Motor Tech tool kit removes universal harmonic balancers, gear pulleys, steering wheels, crankshaft pulleys, and more for easy automotive repair and maintenance.
- COMPLETE 49-PIECE SET: This gear puller kit includes a steel yoke, a pressure screw, 3 adaptors, and 30 bolts in the most needful SAE and metric sizes—1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, M8x1.25, and M10x1.5—to suit your different needs.
- the 4-slot yoke also allows you to use it for two or three-slot operation with ease.
- DURABLE PERFORMANCE: Each of these crank puller tools is constructed from hardened 45# steel while the centering adaptors are further heat-treated and anodized for the necessary strength to get your work done right.
- all metric bolts are blackened and all SAE bolts are chrome-plated for easy identification, offering you years of outstanding dependability and superior corrosion-resistant service.
- SCRATCH-FREE OPERATION: Thanks to the well-designed yoke, pressure screw, and washers, pressure is evenly distributed to pulleys for safe and worry-free servicing.
- WIDE COMPATIBILITY: Including stepped bolts for 1990 and newer GM 3300-3800 V6 crankshaft pulleys, this harmonic balancer tool kit works on most cars, pickups, and SUVs in the market.
Check StockCamshaft Pulley Holder Crankshaft Harmonic Damper Pulley Holding Removal Tool Compatible with Toyota Lexus
- 1X crankshaft damper pulley holding tool.
- Camshaft Pulley Holder Tool: Used it to held the pulleys when remove camshaft pulleys, have two grooved pins to hold camshaft sprockets stationary to remove the bolts, requivalent OEM W89208, compatible with Toyota, Nissan, Camry, Mazda, OHC and many others, the distance between of two grooved pins is 2.36 inches, so please carelly check the size bedfore order.
- Crankshaft Damper Pulley Holder Tool: Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on engines. only Compatible with Lexus from 1990: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
- Compatible with Toyota from 1996 : 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. fit 4 cyl engine : 1983-1995 22RE, 1995-2004 2RZ,1995-2004 3RZ.
- Worked Well: The camshaft pulley holder tool have enougt depth to lock the camshaft sprocket, make it fixed, and with rubber handle, not hurt your hands, make replace cam shaft gears and seals more easy.
Check Stockpalart 1 Set 3/4" to 1" inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter for Predator
- Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
- Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
- The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
- Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
- Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..
Check StockGas Engine Pulley Adapter Kit, 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key
- Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
- Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
- The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
- Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
- Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..
Check StockVMS RACING 94-97 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1994-1997 1.8L BP-ZE Engines ONLY OEM SIZE (uses same belts)
- APPLICATION ENGINE -- 3.0Lt AJ-126/306PS, 5.0Lt AJ133/508PS, 508PN. Replace OEM 303-1437.
- FOR VEHICLE MODEL -- For Jaguar vehicle applications include: F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 - 2018, For Land Rover vehicle applications include: Discovery 4/Discovery, For Range Rover, Range Rover Sport 2009 - 2018..
- FUNCTION -- Set of tools required for the removal and installation of the front crankshaft pulley(Crankshaft Vibration Damper) for Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines. A must have for removing and installing for land rover jag crank pulley..
- BENEFITS -- The crankshaft pulleys used on these engines are tightened to 200 Nm + 270 degrees, so are very tight to undo. This kit helps hold the pulleys tight. Also included in the kit are the puller component’s required to remove the pulley without damage..
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!.
Check StockOTC 6613 Variable Pin Spanner Wrench
- OTC's Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
- Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt.
- Use wrench as-is with it's approximate 12 inch overall length, or for more leverage, use with a 1/2 inch drive ratchet or breaker bar.
- Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
- Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them.
Check StockLicBund 5/8" to 3/4 Inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter Pulley Bore Reducer Bushing Sheave & Key Predator
- Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
- Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
- The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
- Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
- Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..
Check StockAssault Racing Products 2253KIT-BK Big Block Chevy Black Billet Aluminum Gilmer Belt Drive Pulley Kit BBC 427 454
- Short / Long Style Mechanical Water Pumps up to 5/8in Shaft.
- Water Pump Pulley, Crankshaft Pulley, Alternator Pulley, Belt.
- Water Pump and Crankshaft Pulleys are 1:1 Ratio.
Check StockVariable Cylinder Spanner Wrench Set | 15Pc Adjustable Pin Spanner Wrench with Variable Spanner Wrench Pins
- ◇ Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
- ◇ Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
- ◇ Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt.
- ◇ The 12-inch (30.5cm) long small pin wrench Works with a 1/2 inch drive ratchet or breaker bar for an extended reach and added torque.
- ◇ Durable steel material with manganese phosphate finish provides maximum strength and resistance to corrosion.
Check Stock1 to 1-1/8 inch 1/4 Key Gas Engine Pulley Crank Shaft Sleeve Adapter Predator
- This steel shaft sleeve adapts a crankshaft from 1” to 1-1/8” diameter. It comes with 1/4“ stepkey..
- Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
- Part’s specification:Sleeve inside diameter 1”,Sleeve outside diameter 1-1/8”.
- Sleeve length is about 3”,Sleeve Keyway slot 1/4”,Step Key Length is about 2”.
- The sleeve and step key are designed to slip fit on your 1” diameter crankshaft with 1/4” keyway and enlarge it to 1-1/8 diameter with 1/4”....
Check Stockaremnry Universal Pulley Holder Spread Wrench with Interchangeable Pin Camshaft Pulley & Fan Clutch Removal Tool Set
- 【Applications】 Universal design fits many different sized pulleys having slots or holes, such as camshaft pulleys and crankshaft pulleys.Not applicable to 99 F-150 supercharged 5.4L crank pulley..
- 【Specifications】 Wrench is adjustable from 1-1/2 to 8-5/8 inches, four different size step pins: 0.24-0.39in, 0.31-0.43in, 0.39-0.47in, 0.43-0.62in..
- 【Durable】 Wrench tools kits are made of 45# Carbon Steel steel, durability and high strength, great resistance to corrosion and rust..
- 【EFFICIENT】 Long handle enables technician to easily hold the pulley when tightening or loosening retaining Bolts. and does the work a lot faster Convenient and Saving your time and energy..
- 【Easy Storage】 Equipped with blow-molded plastic carry case for easy transportation, simple storage, and quick organization..
Check Stock