Reviews Crankshaft Pulley Holder

Camshaft Pulley Holder Crankshaft Harmonic Damper Pulley Holding Removal Tool Compatible with Toyota Lexus

  • 1X crankshaft damper pulley holding tool.
  • Camshaft Pulley Holder Tool: Used it to held the pulleys when remove camshaft pulleys, have two grooved pins to hold camshaft sprockets stationary to remove the bolts, requivalent OEM W89208, compatible with Toyota, Nissan, Camry, Mazda, OHC and many others, the distance between of two grooved pins is 2.36 inches, so please carelly check the size bedfore order.
  • Crankshaft Damper Pulley Holder Tool: Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on engines. only Compatible with Lexus from 1990: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Compatible with Toyota from 1996 : 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. fit 4 cyl engine : 1983-1995 22RE, 1995-2004 2RZ,1995-2004 3RZ.
  • Worked Well: The camshaft pulley holder tool have enougt depth to lock the camshaft sprocket, make it fixed, and with rubber handle, not hurt your hands, make replace cam shaft gears and seals more easy.
Check Stock

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12 - Month Warranty.
Check Stock

Harmonic Damper Pulley Holding Tool Crank Removal Wrench Tool & Crankshaft Pulley Holder for Lexus Toyota Nissan etc.

  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on toyota / lexus timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock

EWK 50mm Crankshaft Pulley Wrench Holder Tool Crank Removal Holding Spanner kit for Honda and Acura Engines

  • 【 Specialty Tool 】 EWK professional grade Acura and Honda crank pulley tool.
  • holds the harmonic damper pulley in place and keep it from rotating....
  • 【 Wide Applications 】 Works with a 1/2 inch breaker bar or ratchet, this crankshaft pulley holder fits the hex shape of harmonic balancer on many....
  • 【 Great Compatibility 】 Small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing....
  • 【 Tough and Sturdy 】 Highly recommended by professional mechanics! Constructed with hardened Chrome-Molybdenum steel alloy, extremely durable and....
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If....
Check Stock

E-cowlboy for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts

  • FITMENT INFORMATION - Work for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • KEEP CRANK PULLEY STILL - Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines.
  • ROUND EDGE WITH PRECISION FIT HOLE - Small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley, hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while tightening the crank bolt with a torque wrench.
  • PACKAGE INCLUDED - 1 crankshaft damper pulley holding holder tool and 2 crank bolts.
  • 100% SATISFACTION GUARANTEE - If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, no questions asked money back guarantee with 1 year’s warranty.
Check Stock

Assault Racing Products A9724 Big Block Chevy Chrome Triple Groove Long Crankshaft Pulley BBC 396 427 454

  • The pulley have deep grooves to prevent belt slippage and are good for replacing your old pulley..
  • They are made of metal materials to provide good performance and reliability. The Crankshaft Pulley is durable and have high wear resistance..
  • Groove Quantity: 2, Center Hole Diameter: 28mm / 1.1'', Size: 7.1x16.7cm / 2.8"x6.57"(H*D).
  • This crankshaft pulley fits for Chevy SBC Engines when using a long water pump. Please confirm your car model of the part before purchasing to avoid buying the wrong..
Check Stock

Powerbuilt Crankshaft Crank Pulley Removal Tool 50mm Holder Remover and Installer Socket Wrench Honda and Acura - 648796

  • For removal and installation of crankshaft pulley bolt on most Honda and Acura engines.
  • Hexagonal shape fits hole in center of crankshaft pulley.
  • Prevents engine from turning when held with breaker bar.
  • Hole in center allows socket access to crankshaft pulley bolt.
  • Package includes usage instructions and photos.
Check Stock

Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

  • ... Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
  • fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
  • Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
  • Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
  • Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley tool can be perfectly adapted to the engine, worked exactly as the OEM tools, and we offer 12 month warranty, let you order no worry.
Check Stock

19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder for Honda and Acura Engines

  • 【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many....
  • Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows....
  • 【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that....
  • Using 19MM Harmonic Balancer Socket -- Use with 1/2" drive.Designed with more than three times the standard socket mass to direct more energy to....
  • Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days, guarantee with 12 months’....
Check Stock

AJP Distributors JDM Upgrade Light Weight Aluminum Under Drive Crank Shaft Crankshaft Alternator Pulley Wheel Kit Red Compatible/Replacement For Impreza Wrx 2.0L 2.5L EJ20 EJ25 Turbo Engine

  • The pulley have deep grooves to prevent belt slippage and are good for replacing your old pulley..
  • They are made of metal materials to provide good performance and reliability. The Crankshaft Pulley is durable and have high wear resistance..
  • Groove Quantity: 3, Center Hole Diameter: 28mm / 1.1'', Size: 7.1x16.7cm / 2.8"x6.57"(H*D).
  • This crankshaft pulley fits for Chevy SBC Engines when using a long water pump. Please confirm your car model of the part before purchasing to avoid buying the wrong..
Check Stock

VMS RACING 99-05 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1999-2005 1.8L BP-4W Engines ONLY OEM SIZE (uses same belts)

  • Function: This crank pulley tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
  • Feature: Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt..
  • Design: This 50 mm crank pulley tool socket designed with a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Compatibility: This crankshaft pulley wrench holder tool compatible for Honda (most) and Acura engines..
  • Material: Made of hardened chrome molybdenum steel with great durability to long-lasting service your engine..
Check Stock

MOSTPLUS Damper Crankshaft Crank Pulley Holder Wrench Holder Removal Tool Compatible with Honda Acura Harmonic 50mm

  • MOSTPLUS 50mm crankshaft pulley holder tool is designed to aid in the removal and installation of the crank bolt compatible with Honda and compatible....
  • Used with a 1/2 inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing....
  • The tools design features a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or....
  • Used when loosening/tightening the retaining bolt.
  • Detailed fitment below, pls check it before purchase.
Check Stock

Assault Racing Products 2253KIT-BK Big Block Chevy Black Billet Aluminum Gilmer Belt Drive Pulley Kit BBC 427 454

  • Short / Long Style Mechanical Water Pumps up to 5/8in Shaft.
  • Water Pump Pulley, Crankshaft Pulley, Alternator Pulley, Belt.
  • Water Pump and Crankshaft Pulleys are 1:1 Ratio.
Check Stock