Reviews Crankshaft Position Sensors

Bosch 0261210318 Original Equipment Crankshaft Position Sensor

  • Bosch Original Equipment Crankshaft Position Sensors are built to ensure correct fit and function.
  • Wide range of operational temperatures gives vehicles accurate reading.
  • Creates lower emissions and improved fuel consumption.
  • High resistance against external interference.
Check Stock

Holstein Parts 2CRK0359 Crankshaft Position SENSOR 1 Pack

  • Holstein Crankshaft Position Sensors are direct OE replacements for these critical engine components, offering perfect fit, form and function for....
  • Precision engineered sensor exactly duplicates the function of the OE component - ensuring smooth, powerful engine performance and maximum fuel....
  • Manufactured with premium materials that ensure rugged, long-term performance and the heat resistance necessary to withstand high engine operating....
  • Grommets, screws, and other hardware are included (where applicable) to ensure proper fit and a tight, leakproof seal.
  • Backed by Holstein's 3 year/36k mile warranty - we believe in our parts and our warranty shows it.
Check Stock

Cam Phaser Locking Tool and Crankshaft Positioning Tool Crankshaft Wrench Holder Fit for Ford 1993 4.2L/4.6L 2-valve,4.6L 4-valve 5.4L/6.8L V8 Similar to Rotunda 303-448,T93P-6303-A,6024&525219

  • FITMENT(Crankshaft Positioning Tool):1993 and newer 4.2L/4.6L 2-valve engines,4.6L 4-valve and 5.4L and 6.8L V-8 engines..
  • FITMENT(Cam Phaser Locking Tool):Expedition 5.4L 3V 2005-2011.
  • F-250/350/450/550 5.4L 3V 2005-2009.Mark LT 5.4L 3V 2006-2008.
  • Mountaineer 4.6L 3V 2006-2010.Mustang 4.6L 3V 2005-2010.
  • Navigator 5.4L 3V 2005-2012.Similar to Rotunda 303-448,6024,525219..
  • MATERIAL And DESIGN(Cam Phaser Locking Tool):Hardened chrome molybdenum steel,resistance on rust,deformation and crack.Designed with a triangle shape with four holes to perfectly fits for your cam phaser.It is a quite available accessory to make you do the phaser job with ease..
  • USAGE(Crankshaft Positioning Tool):This tool slides easily over the crankshaft and seamlessly locks into place with the Wood ruff key.You only need to rotate the crankshaft with tool attached to crank so that the slot in the handle locks into the engine cover alignment dowel pin,ensuring the engine is at the correct TDC point avoiding extreme damage and costly repairs..
  • CORRECT INSTALLATION POSITION(Crankshaft Positioning Tool):Easily installs over the crankshaft and engine front cover alignment dowel to position the crankshaft at top-dead-center..
Check Stock

Engine Crank Crankshaft Position Sensor Compatible with 2.0L 2.3L 2.4L 03-10 Cirrus Sebring Voyager - 03-07 Caravan Neon Stratus - 03-06 Liberty TJ Wrangler - 07-09 9-5 907763 PC440

  • Check the Amazon Parts Finder to see if this parts fit your vehicle and check the descroption also to see the detail fitment info.
  • Crossreference with OEM NUMBER 5269873, 5269873AB, 5269873AC.
  • Innovative engineering, manufacturing technology and quality control ensure that STETIG Crankshaft Position Sensor meet or exceed the performance of....
  • STETIG offers complete Crankshaft Position Sensor coverage for Asian, Domestic and European vehicles, top brand awareness and unsurpassed quality.
  • STETIG warrants its Crankshaft Position Sensor for a period of three years from the date of purchase. Within this period, we will replace any....
Check Stock

Engine Crank Crankshaft Position Sensor Compatible with 2.0L 2.4L 4.3L 4.8L 5.3L 6.0L 6.2L 7.0L Chevy 917760 PC552 EH0403 5S8072 2133520 12585546

  • Check the Amazon Parts Finder to see if this parts fit your vehicle and check the descroption also to see the detail fitment info.
  • Innovative engineering, manufacturing technology and quality control ensure that STETIG Crankshaft Position Sensor meet or exceed the performance of....
  • STETIG offers complete Crankshaft Position Sensor coverage for Asian, Domestic and European vehicles, top brand awareness and unsurpassed quality.
  • STETIG warrants its Crankshaft Position Sensor for a period of three years from the date of purchase. Within this period, we will replace any....
Check Stock

ATP 50mm Cranks Crankshaft Pulley Removal Wrench Holder Tool Remover and Installer Socket Wrench Removal Holding Spanner kit Compatible with Honda and Acura Engines

  • Premium Quality: The remover and installer socket wrench is designed with hardened chrome molybdenum steel construction, coated with black paint which prevention corrosion, heavy duty sturdy and durable..
  • Specifications: The 50mm crankshaft crank pulley wrench holder tool is of 2.2 inches by 5.8 inches by 5.9 inches, weight 1.3-pounds..
  • Hexagonal Shape Design: This crankshaft crank pulley removal tool is designed with a hexagonal shape with a hole in the center of the tool, that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Great Function: The 50mm cranks crankshaft pulley removal wrench holder tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
  • Great Compayibility: This crankshaft crank pulley removal tool adopts small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain, fits for most Honda and Acura engines..
Check Stock

19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder for Honda and Acura Engines

  • 【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many....
  • Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows....
  • 【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that....
  • Using 19MM Harmonic Balancer Socket -- Use with 1/2" drive.Designed with more than three times the standard socket mass to direct more energy to....
  • Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days, guarantee with 12 months’....
Check Stock

A-Premium Engine Camshaft Position Sensor Compatible with Volkswagen Beetle 2014-2018 Golf 2016-2017 GTI Jetta 2015-2018

  • 【Vehicle Fitment】Compatible with Volkswagen Beetle 2014-2018, Golf 2016-2017, GTI 2015-2018, Fit for Jetta 2015-2018.
  • 【Reference Number】04C907601K, 04C907601L, 04C907601B, PC1058.
  • 【Specification】Premium quality crankshaft position sensor for exceptional durability.
  • Utilizes the latest in design and material technology.
  • Ensuring quiet and maintenance-free experience..
  • 【Directly Fit】OE Replacement Brand New Crankshaft Position Sensor. Please enter your vehicle information in the top left corner to confirm the vehicle compatibility before purchasing..
  • 【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping experience. Any further question, please feel free to contact us at any time..
Check Stock

E-cowlboy Crankshaft Positioning Tool for Ford 1993-newer 4.2L 4.6L 5.4L 6.8L Engines Crankshaft Holding Tool Timing Chain Installation Replace for Rotunda 303-448, T93P-6303-A, 6024 & 525219

  • ...4.6L 2 valve and 4.6L 4-valve V8, 5.4L V8, and 6.8L V10 engines. Replace for Rotunda 303-448, T93P-6303-A, 6024 & 525219. Each part is manufactured to OEM specifications and testing..
  • Perfect Design — These engines are not Free Wheel engines, please Do Not rotate the crankshaft and/or camshaft when removing the timing chain and installing the cylinder heads. If it has "Jumped Timing", it will cause damage to the Valves and/or Pistons, requiring removal of the cylinder heads..
  • Easier Work — Must have tool for timing chain installation and adjustment! Easily install this tool over crankshaft and engine front cover alignment dowel. Align the crankshaft Woodruff key with the keyway on tool. It will position the crankshaft at top-dead-center (TDC) to correct the timing chain installation..
  • Superior Quality — Premium grade CNC machined heavy duty solid steel with black powder coated, strength and durability, anti-corrosion and anti-rust, anti-impact and anti-deformation. High precision and hardness to provide a much longer service life..
Check Stock

Crank Flywheel Turning Rotating Barring Tool 88800014 88840317 Replacement for Volvo D11 D13 D16 Mack MP7 MP8 MP10 2008-2020

  • Great Compatibility — Fit for all 2008-2020 Volvo D11, D13, D16 and Mack MP7, MP8, MP10.
  • Directly replaces OEM Part Number 88800014 88840317 and work in a easier way to save your time and money.
  • This Flywheel barring tool will help you rotate your crankshaft with ease while performing overhead adjustment, replacing your injectors, or timing....
  • Made of high quality solid steel with black powder coated surface, providing an unparalleled lifespan, anti-corrosion and wear.
  • Special designed to rotate the flywheel of crankshaft for correcting the timing position.
Check Stock

Senyar Crankshaft Assembly, Heavy Duty Crankshaft Connecting Rod Motorcycles Assembly Aluminum Alloy Automotive Replacement Fits for GY6 125cc 150cc ATV

  • Purchase reference ---The motorcycle crankshaft assembly replacement for GY6 125cc 150cc ATV Motorcycles..
  • Function --- Motorcycle crankshaft assembly has beautiful design, professional manufacturing, high sensitivity, high reliability and strong adaptability. It can maintain excellent stability and durability under all conditions..
  • Product material---The motorcycle crankshaft assembly is made of high-quality aluminum alloy material, which has the characteristics of long-lasting performance and durability. It has undergone fine surface treatment to ensure reliable performance and longer service life. Our motorcycle crankshaft assembly is more reliable and safer , Is your ideal choice..
  • Professional manufacturing --- Each of our products has been carefully designed and manufactured. We have a strict quality control system to ensure stable....
Check Stock

DTS New Oil Pressure Sensor Switch PS417 Replacement for Infiniti, Nissan

  • FITMENT - Oil Pressure Sensor fit for 2004-2009 for Infiniti QX56,2003-2009 for Nissan 350Z,2005-2006 for Nissan Altima,2005-2008 for Nissan Armada,2005-2009 for Nissan Frontier,2009-2010 for Nissan GT-R,2004-2009 for Nissan Pathfinder,2009 for Nissan Sentra,2004-2008 for Nissan Titan,2005-2009 for Nissan Xterra.
  • OE NUMBERS - PS417 201-2368 1S6896 PS561 25070-CD000 25070-CD00A.
  • FUNCTION - The crankshaft sensor can accurately and quickly feed back the position information of the crankshaft to the ECU, enabling the ECU to accurately analyze the cylinder compression to determine the ignition timing, which will improve the engine ignition efficiency and allow you to get a faster start and acceleration experience..
  • ADVANTAGES - 100% brand new aftermarket unit built to meet OEM specifications. Shipping from USA, fast shipping and good service. Factory price with higher cost-effective..
  • NOTICE - Please check picture,part number and fitment chart before placing order. For whatever we can help, please feel free to tell us via Email. We are always here for help you.
Check Stock

MOSTPLUS 13627525015 1X CrankShaft Position Sensor 2X Camshaft Position Sensor Kit Compatible for BMW 325i 328i 13627558518 13627525014 13627546660

  • Compatible for (Detailed Application Below).
  • OEM Part Number: 13627558518, 13627525014, 13627546660, 13627525015, 13 62 7 525 015, 6PU 009, 163-301, 13 62 7 558 518, 13 62 7 525 014, 13 62 7 546....
  • The key parts including chip from top supplier.
  • Package includes : 1 - Crankshaft Position Sensor 2 - Camshaft Position Sensor.
  • Note:Please check your car information before purchase.
Check Stock