Reviews Crankshaft Position Sensors 2

Bosch 0261210318 Original Equipment Crankshaft Position Sensor

  • Bosch Original Equipment Crankshaft Position Sensors are built to ensure correct fit and function.
  • Wide range of operational temperatures gives vehicles accurate reading.
  • Creates lower emissions and improved fuel consumption.
  • High resistance against external interference.
Check Stock

Holstein Parts 2CRK0359 Crankshaft Position SENSOR 1 Pack

  • Holstein Crankshaft Position Sensors are direct OE replacements for these critical engine components, offering perfect fit, form and function for....
  • Precision engineered sensor exactly duplicates the function of the OE component - ensuring smooth, powerful engine performance and maximum fuel....
  • Manufactured with premium materials that ensure rugged, long-term performance and the heat resistance necessary to withstand high engine operating....
  • Grommets, screws, and other hardware are included (where applicable) to ensure proper fit and a tight, leakproof seal.
  • Backed by Holstein's 3 year/36k mile warranty - we believe in our parts and our warranty shows it.
Check Stock

Cam Phaser Locking Tool and Crankshaft Positioning Tool Crankshaft Wrench Holder Fit for Ford 1993 4.2L/4.6L 2-valve,4.6L 4-valve 5.4L/6.8L V8 Similar to Rotunda 303-448,T93P-6303-A,6024&525219

  • FITMENT(Crankshaft Positioning Tool):1993 and newer 4.2L/4.6L 2-valve engines,4.6L 4-valve and 5.4L and 6.8L V-8 engines..
  • FITMENT(Cam Phaser Locking Tool):Expedition 5.4L 3V 2005-2011.
  • F-250/350/450/550 5.4L 3V 2005-2009.Mark LT 5.4L 3V 2006-2008.
  • Mountaineer 4.6L 3V 2006-2010.Mustang 4.6L 3V 2005-2010.
  • Navigator 5.4L 3V 2005-2012.Similar to Rotunda 303-448,6024,525219..
  • MATERIAL And DESIGN(Cam Phaser Locking Tool):Hardened chrome molybdenum steel,resistance on rust,deformation and crack.Designed with a triangle shape with four holes to perfectly fits for your cam phaser.It is a quite available accessory to make you do the phaser job with ease..
  • USAGE(Crankshaft Positioning Tool):This tool slides easily over the crankshaft and seamlessly locks into place with the Wood ruff key.You only need to rotate the crankshaft with tool attached to crank so that the slot in the handle locks into the engine cover alignment dowel pin,ensuring the engine is at the correct TDC point avoiding extreme damage and costly repairs..
  • CORRECT INSTALLATION POSITION(Crankshaft Positioning Tool):Easily installs over the crankshaft and engine front cover alignment dowel to position the crankshaft at top-dead-center..
Check Stock

19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder for Honda and Acura Engines

  • 【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many....
  • Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows....
  • 【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that....
  • Using 19MM Harmonic Balancer Socket -- Use with 1/2" drive.Designed with more than three times the standard socket mass to direct more energy to....
  • Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days, guarantee with 12 months’....
Check Stock

ATP 50mm Cranks Crankshaft Pulley Removal Wrench Holder Tool Remover and Installer Socket Wrench Removal Holding Spanner kit Compatible with Honda and Acura Engines

  • Premium Quality: The remover and installer socket wrench is designed with hardened chrome molybdenum steel construction, coated with black paint which prevention corrosion, heavy duty sturdy and durable..
  • Specifications: The 50mm crankshaft crank pulley wrench holder tool is of 2.2 inches by 5.8 inches by 5.9 inches, weight 1.3-pounds..
  • Hexagonal Shape Design: This crankshaft crank pulley removal tool is designed with a hexagonal shape with a hole in the center of the tool, that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Great Function: The 50mm cranks crankshaft pulley removal wrench holder tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
  • Great Compayibility: This crankshaft crank pulley removal tool adopts small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain, fits for most Honda and Acura engines..
Check Stock

Engine Crank Crankshaft Position Sensor Compatible with 2.0L 2.3L 2.4L 03-10 Cirrus Sebring Voyager - 03-07 Caravan Neon Stratus - 03-06 Liberty TJ Wrangler - 07-09 9-5 907763 PC440

  • Check the Amazon Parts Finder to see if this parts fit your vehicle and check the descroption also to see the detail fitment info.
  • Crossreference with OEM NUMBER 5269873, 5269873AB, 5269873AC.
  • Innovative engineering, manufacturing technology and quality control ensure that STETIG Crankshaft Position Sensor meet or exceed the performance of....
  • STETIG offers complete Crankshaft Position Sensor coverage for Asian, Domestic and European vehicles, top brand awareness and unsurpassed quality.
  • STETIG warrants its Crankshaft Position Sensor for a period of three years from the date of purchase. Within this period, we will replace any....
Check Stock

Engine Crank Crankshaft Position Sensor Compatible with 2.0L 2.4L 4.3L 4.8L 5.3L 6.0L 6.2L 7.0L Chevy 917760 PC552 EH0403 5S8072 2133520 12585546

  • Check the Amazon Parts Finder to see if this parts fit your vehicle and check the descroption also to see the detail fitment info.
  • Innovative engineering, manufacturing technology and quality control ensure that STETIG Crankshaft Position Sensor meet or exceed the performance of....
  • STETIG offers complete Crankshaft Position Sensor coverage for Asian, Domestic and European vehicles, top brand awareness and unsurpassed quality.
  • STETIG warrants its Crankshaft Position Sensor for a period of three years from the date of purchase. Within this period, we will replace any....
Check Stock

A-Premium Engine Camshaft Position Sensor Compatible with Volkswagen Beetle 2014-2018 Golf 2016-2017 GTI Jetta 2015-2018

  • 【Vehicle Fitment】Compatible with Volkswagen Beetle 2014-2018, Golf 2016-2017, GTI 2015-2018, Fit for Jetta 2015-2018.
  • 【Reference Number】04C907601K, 04C907601L, 04C907601B, PC1058.
  • 【Specification】Premium quality crankshaft position sensor for exceptional durability.
  • Utilizes the latest in design and material technology.
  • Ensuring quiet and maintenance-free experience..
  • 【Directly Fit】OE Replacement Brand New Crankshaft Position Sensor. Please enter your vehicle information in the top left corner to confirm the vehicle compatibility before purchasing..
  • 【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping experience. Any further question, please feel free to contact us at any time..
Check Stock

Camshaft Position Sensor PHASE Set of 2 - Compatible with Nissan and Infiniti 3.5L 4.0L V6 Altima Maxima 350Z Pathfinder FX35 G35 QX45 - Replaces 23731-AL61A 917-704 237316J90B 907-716

  • Replacement Bank 1 & 2 Camshaft Position Sensors Set of 2 - The camshaft position sensors determines the rotating position of the camshaft to regulate....
  • Compatible Replacement for Nissan & Infiniti Vehicles - 2003 - 2008 FX35 | 2003 - 2007 G35 | 2002 - 2004 I35 | 2006 - 2008 M35 | 2004 - 2010 QX56 |....
  • Replaces Part# Bank 1 Sensor : 907-716, 237316J90B, 23731-6J906, 23731-6J905, 237316J900, 237315M016, 237315M015, 237315M010 | Bank 2 Sensor :....
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement for the factory camshaft position sensors. If you are....
  • Lifetime Warranty - This replacement camshaft position sensor kit of 2 comes complete with a lifetime warranty. If the part ever fails on your vehicle....
Check Stock

E-cowlboy Crankshaft Positioning Tool for Ford 1993-newer 4.2L 4.6L 5.4L 6.8L Engines Crankshaft Holding Tool Timing Chain Installation Replace for Rotunda 303-448, T93P-6303-A, 6024 & 525219

  • ...4.6L 2 valve and 4.6L 4-valve V8, 5.4L V8, and 6.8L V10 engines. Replace for Rotunda 303-448, T93P-6303-A, 6024 & 525219. Each part is manufactured to OEM specifications and testing..
  • Perfect Design — These engines are not Free Wheel engines, please Do Not rotate the crankshaft and/or camshaft when removing the timing chain and installing the cylinder heads. If it has "Jumped Timing", it will cause damage to the Valves and/or Pistons, requiring removal of the cylinder heads..
  • Easier Work — Must have tool for timing chain installation and adjustment! Easily install this tool over crankshaft and engine front cover alignment dowel. Align the crankshaft Woodruff key with the keyway on tool. It will position the crankshaft at top-dead-center (TDC) to correct the timing chain installation..
  • Superior Quality — Premium grade CNC machined heavy duty solid steel with black powder coated, strength and durability, anti-corrosion and anti-rust, anti-impact and anti-deformation. High precision and hardness to provide a much longer service life..
Check Stock

MOSTPLUS 13627525015 1X CrankShaft Position Sensor 2X Camshaft Position Sensor Kit Compatible for BMW 325i 328i 13627558518 13627525014 13627546660

  • Compatible for (Detailed Application Below).
  • OEM Part Number: 13627558518, 13627525014, 13627546660, 13627525015, 13 62 7 525 015, 6PU 009, 163-301, 13 62 7 558 518, 13 62 7 525 014, 13 62 7 546....
  • The key parts including chip from top supplier.
  • Package includes : 1 - Crankshaft Position Sensor 2 - Camshaft Position Sensor.
  • Note:Please check your car information before purchase.
Check Stock

BETOOLL 19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder Tool Removal Holding Spanner kit Compatible with Honda and Acura Engines

  • 50mm Crankshaft Pulley Removal Tool: Used to maintain the harmonic damper pulley position and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
  • Using of 50mm Tool: Works with a 1/2 inch breaker bar or ratchet. Small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain..
  • 19mm Harmonic Balancer Socket: BETOOLL socket could be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications..
  • Using of 19mm Tool: Used with 1/2” square drive. This Harmonic Balancer Socket features a deep counter-weighted design to increase torque, so you could quickly and easily break stubborn bolts loose..
  • Tough and Sturdy: Made of high strength alloy steel,heavy duty and durable.Coated with black paint which prevention corrosion. Backed by a lifetime replacement guarantee..
Check Stock

MOSTPLUS 2 Camshaft 1 Crankshaft Position Sensor Compatible for BMW E46 3-Series 12147539165 + 12141438082 + 12141709616

  • Fitment: Compatible for 2001-2005 BMW 320I, Compatible for 2000 BMW 323CI, Compatible for 1999-2000 BMW 323I, Compatible for 2001-2005 BMW 325CI,....
  • OEM Part Number: 12147539165 + 12141438082 + 12141709616 (Please check your car information before purchase).
  • The key parts including chip from top supplier.
  • Part Specifications: Camshaft with wire--Connector Gender:Female,Terminal Gender:Male,Terminal Type:Blade,Terminal Quantity:3.
  • Package includes: 2 Engine Camshaft Position Sensor(Engine Intake Side with Wire & Exhaust side without Wire) + 1 Crankshaft Position Sensor.
Check Stock