Reviews Crank Shaft Sensor

NEW HOLLEY SNIPER EFI HYPERSPARK DISTRIBUTOR FOR CD IGNITION BOX, COMPATIBLE WITH CHEVY SMALL & BIG BLOCK

  • Brand New Holley Sniper EFI HyperSpark Distributor, Compatible with Chevy Small Block & Big Block (Part #565-300).
  • Features: Hall Effect crank trigger sensor housing provides a noise-free RPM signal to the Sniper ECU | Billet distributor housing provides corrosion resistance and stylish looks! | Patented Clear Installation cap eliminates any confusion while installing the distributor | Easiest plug and play way to add timing control to a Sniper EFI Installation | Distributor shutter wheel is pinned and welded to the shaft, for decades of reliable accuracy | Includes Wire Retainer for a clean installation |.
  • Comes with Cast Gear Installed - contact camshaft manufacturer for recommended gear material | Designed to be used with Sniper EFI HyperSpark CD box P/N 556-151 and Ignition Coil 556-152.
  • Specs: Brand: Holley Sniper EFI | Emission Code: 3 | Material: Shiny Billet Aluminum | Product Type: Distributor.
  • HyperSpark distributors are plug and play with all Holley Sniper EFI systems, featuring a high-quality billet distributor housing, hall effect crank trigger sensor, and they com....
Check Stock

Holley Sniper 565-300 EFI Hyperspark Distributor w/Ign. Coil/Box

  • HyperSpark Ignition, from Sniper EFI. Ready to plug and play with your Sniper EFI System.
  • The complete system consists of an ignition coil, CD ignition box, billet distributor with hall effect crank signal sensor, and complete wiring harness ready to plug and play with your Sniper EFI System.
  • The HyperSpark ignition coil comes self-contained in it’s own mounting bracket, with mounting hardware provided.
  • Comes with Cast Gear Installed – contact camshaft manufacturer for recommended gear material.
  • Distributor shutter wheel is pinned and welded to the shaft, for decades of reliable accuracy.
Check Stock

Darton 300-018 Dry Cylinder Sleeve Kit for H22 & H23

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4” to 1” diameter. It comes with 1.77"" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

SPI Fix Kit 2010-2012 fits Polaris 800 Sleds 85mm Pistons Bearings & Fix Kit

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1"-3/4"x1/4"-3/16" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Wiseco 74.0Mm Black Anodized Piston Ring Compressor Sleeve By Jm Auto Racing (Rcs07400)

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 7/8" to 1" diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

AA Performance Products 88 x 69mm 1700cc Slip-in Piston & Cylinder Kit, Fits VW

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft for 5/8" x 3/4" x 3" diameter.It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

X AUTOHAUX 1\ to 1 1/8 Inch -1/4\ Engine Shaft Sleeve Adapter Kit with Step Key for Car

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1" to 1 1/ 8 inch -1/4" diameter. It comes with 2.05" step key..
  • [ ] Made from cold rolled stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Bapmic Mechatronics Sealing Sleeve and Double D Gasket Compatible with BMW E60 E65 E66 E70 E71 E90 335i

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4"to 7/8" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Lisle 58430 Shaft Type Seal Puller

  • Removes Cam Shaft and Crank Shaft Seals Without Damage to the Shaft.
  • Engage the adjustable hook behind the seal.
  • Brace the push rod against the engine head and push the handle to remove the seal.
  • Removes the seal without damage to the shaft.
Check Stock

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

  • This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
  • Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
  • The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
  • Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
  • Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.
Check Stock

JIANKUN Bike Crank Arm Set 170mm 104 BCD with Bottom Bracket Kit and Chainring Bolts for MTB BMX Road Bicycle Compatible with Shimano FSA Gaint Black

  • Material: Alloy 6061 crank, high intensity steel chainring..
  • Bottom Bracket Width: 68-73mm. BCD: 104mm. Crank Arm Length: 170mm, Crank Screw Aliber: 15mm..
  • Hollow one sprocket wheel shaft for mountain bikes, road bikes..
  • Compatible With: Shimano, FSA, Gaint ATX770 ATX770-D XTC 750..
  • Package Include: One fordged crank set, bottom bracket, 4 pcs single chainring bolts, crank screw, crankset bolt allen wrench..
Check Stock

Frabill 1664 Classic Tip-Up Wooden Boxed

  • Traditional hardwood design | 17.5" flag | Ultra-glide shaft for friction-free performance | Large capacity metal spools and dual counterbalance crank nobs to prevent wobbling and false movement.
  • Pre-lubed with Sub-Zero low-temp lubricant | Shaft-in-shaft design allows re-greasing for many seasons of successful ice fishing.
  • Dual trip settings (light or heavy) for versatile options depending on your preference.
Check Stock

Crank Engine Crankshaft Position Sensor replacement for L4 V6 V10 2.4L 3.6L 2.0L 3.5L 1.8L 8.3L 8.4L 200 Avenger Caliber Cirrus Compass Journey Patriot Ram 1500 Sebring Viper

  • Check the Amazon Parts Finder to see if this parts fit your vehicle and check the descroption also to see the detail fitment info.
  • Crossreference with OEM Number 5033307AA, 5033307AB, 5033307AC, 5033307AD, 5S11783, 5S8996, SU10458, SU13236, SU8488.
  • Innovative engineering, manufacturing technology and quality control ensure that SCHNECKE Cam & Crank Position Sensor meet or exceed the performance....
  • SCHNECKE offers complete Cam & Crank Position Sensor coverage for Asian, Domestic and European vehicles, top brand awareness and unsurpassed quality.
  • SCHNECKE warrants its Cam & Crank Position Sensor for a period of One years from the date of purchase. Within this period, we will replace any Cam &....
Check Stock