Reviews Cr 1all Metal Hotends

[Gulfcoast Robotics] Silicone Socks for MK8 Creality All Metal Hotend 3 Pack Blue

  • Thermal socks are made from heat resistant, non stick silicone material rated up to 280C.
  • Snug fit grips the the heater block and won't fall off during use.
  • Stabilizes hotend temperatures and reduces heat loss.
  • Protects the heater block and nozzle from plastic residue.
  • Compatible with MK8 all metal hotends for Creality 3D Printers from Gulfcoast Robotics, Micro Swiss and more.
Check Stock

VTech CS6919-2 DECT 6.0 Expandable Cordless Phone with Caller ID and Handset Speakerphone, 2 Handsets, Silver

  • Caller ID/c1all waiting: stores 30 calls.
  • VTech cordless phone has call block directory that can store up to 20 numbers.
Check Stock

Genuine E3D Hotend Thermistor Cartridge Replacement

  • Direct replacement of cartridge type thermistor in E3D hotends..
  • A custom made thermistor encapsulated into an easy to use cartridge package..
  • Comes with (1) Hotend Thermistor with attached connector and (1) connector cable measuring 40 inches (101cm).
Check Stock

[Gulfcoast Robotics] 3 PCS x Thermal Protection Silicone Sock for V6 3D Printer Extruder Hotend

  • Compatible with E3D V6 hotends and clones WITHOUT cartridge thermistor (prior to 2018 V6 versions).
  • Designed and manufactured by Gulfcoast Robotics. USA Company.
  • Perfect fit, will not fall off or come loose during prints. Very long lifespan..
Check Stock

Official Creality 3D Extruder Feeder Drive MK-8 Aluminum Upgraded 1.75mm for CR-10 Ender 3 CR-10S (Black)

  • 【Upgrade Black Extruder】All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about filament scraping or breaking. This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware..
  • 【Wide Application】The upgrade Creality3D silver metal Bowden extruder is compatible with nearly all models of 3D printers(Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro). No need to change stepper motors or other mounting hardware..
  • 【Very Easy to Install】 Unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. Our metal extruder kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
  • 【Durable】 All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • 【Official Creality Original Quality】This high-quality all-aluminum construction is guaranteed to last for years,....
Check Stock

Creality 3D Printer Kit with Aluminum Ender 3 Extruder Upgraded, Compression Die Springs for Bed Leveling, Metal Hand Twist Leveling Nut Suit for Ender 3 Pro/5/5 Pro, CR-10 Series/10V2/20/20 Pro

  • 【Great Replacement】Our Tresbro perfect aluminum adjuster wheels, bed leveling springs combined with the all metal extruded made a big difference in the print quality for your Creality 3D printer. They are awesome upgrades kit for Ender 3, Ender 3 Pro, Ender 5, CR-7, CR-8, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR 20..
  • 【1*Silver Metal Bowden Extruder】The all metal Mk-8 extruder feeder drive 1.75mm filament is very well built and seems to grip the filament alot better than the plastic stock one, that can prevents downtime from the stock plastic version failing, no worries about filament scraping or breaking..
  • 【4*Hand Twist Level Nuts】Metal nuts was more powerful and will twist more tightly than the original plastic nuts. The torque of these nuts is large, making it easier to fine tune the hot bed, which keeps your printer level without having to level it often..
  • 【 4*Small Yellow Compression Springs】The die springs are a worthwhile upgrade, making bed levelling easier and stronger than the stock ones, so you don't have to worry about leveling the bed over and over after wash print..
  • 【 Easy To Install 】 They were super easy to install and works like a charm. Your 3d printer was in major need of these s....
Check Stock

CREALITY Official Extruder for Ender 3 3D Printer Aluminum Drive Feed Bowden Extruders Upgrade Accessories Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 Series and CR-10 Series

  • Upgrade Material - High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term use..
  • Stable and Durable-Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original plastic one while working..
  • Easy to Install - All you do is unbolt the old original plastic extruder and screw in the new " Red Metal Extruder ", then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame..
  • Wide Compatibility - Red extruder is suitable for Creality 3d printers accessories: Ender 3, Ender 3 V2, Ender 3 Pro, Ender-3 Max, Ender 5 / 5 Plus / 5 Pro, CR-10S, CR-10, CR 10 mini, CR-10 S5, CR-10 S4, CR 20, CR-20 Pro, CR-X..
  • Creality Official Sales: All products are officially sold, genuine and high-quality, please rest assured to buy. All the necessary accessories are included in the package..
Check Stock

Upgrade 3D Printer Parts MK8 Extruder Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality 3D Ender 3,CR-7,CR-8 CR-10 CR-10S CR-10 S4 and CR-10 S5 Left Hand

  • [UPGRADING] Original Aluminum Drive Feed for Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5, it is stable and durable..
  • [REPLACEMENT] MK8 extruder drive feed kit, can replace acrylic parts of Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5.
  • [Easy to use: used] for 1.75mm filament of 3D printer MK8 bowden extruder frame.
  • [Stable and durable] Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original....
  • [Advantage] the metal extruder have better stronger pressure to pushing filament into printer nozzle so will improve the printer's performance. And....
Check Stock

Official Upgraded Ender 3 v2 Ender 3 CR-10 All Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Creality Ender 3 Pro/Ender 5/ CR-10 Series 3D Printer

  • The gray metal extruder is an original upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus..
  • Works better than original plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder..
  • Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy..
  • Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install..
  • 100% brand new and original Creality exturder. If you have any question, please feel free to contact us..
Check Stock

Creality Upgraded MK-8 Metal Feeder Extruder Frame Aluminum Gray Bowden Extruder Drive for Creality Ender 3/3 Pro/3V2/5/5 Plus, CR-10 Series, CR -10S/20/20 Pro 3D Printer

  • WIDE APPLICATION: The extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware. Suitable for Creality 3D Printers Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro..
  • ADVANTAGES: Pushing the filament into the printer nozzle with more pressure to improve the performance of the printer. The bolt of our extruder kits is adjustable so that you can adjust the pressure of the extruder gear as needed..
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. This extruder DIY kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame..
  • STABLE: All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • CUSTOMER SUPPORT - If you have any problems with our product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you..
Check Stock

Upgraded 4PCS Creality 3D Printer Aluminum Hand Twist Leveling Nut Hot Bed Die Springs for Ender 3/3 Pro/3 V2, Ender 5/5 Plus/Pro, CR-10/ CR10S/10S Pro/ CR 20 3D Printer

  • Durablility: These leveling nuts are made of premium aluminium alloy, rust and corrosion resistance, which have a longer lifespan than your plastic nuts. these red aluminum nuts are original upgraded replacement part for Ender 3/3 Pro/3 V2/3 Max, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 V3,CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR 10S Pro V2, CR-10 Plus, CR-X, CR 20..
  • Upgraded Design: Metal nut is more powerful and can be twisted more tightly than plastic nuts and the torque of these nuts is large, making it easier to fine tune the hot bed..
  • Compatility: Apply for 3D printer hot bed/ platform. these nuts are original upgraded replacement part for Ender 3/3 Pro/3 X, Ender 5/5 plus/ 5 pro, CR-10, CR-10 V2, CR-10 max, CR 10, CR-10 mini, CR-10S, CR 10S Pro, CR-10 plus, CR-X, CR 20..
  • Note: The springs are around 25mm long, which is longer than ender 3 and ender 3 pro printer springs. You have to cut the springs or adjust the hot bed height..
  • Professional Customer Support: If you have any problem or question ablout our product, please feel free to contact us. Our professional customer service team will assist you..
Check Stock

Muzata 20Pack 1/8' Invisible Cable Railing Kit Terminal Toggle Anchor Angle Adjustable T316 Stainless Steel for Metal Post Stair Deck One Post Corner CR07, CV2

  • Completely Invisible & Multi-angle – Muzata cable railing kit CR07 works for 1/8″ wire rope. It can be easily stuck and completely hidden inside the METAL posts to get a neat appearance. The multi-angle feature enables the toggle anchor terminal to rotate from 0-180 degrees. It works on both level and multi-angle sections without angled washers. Note: this cabler railing kit ONLY works for hollow METAL posts(20mm≥hole size≥10mm ).Package include:20packs terminals.
  • One-Post Corner & Wall Post Solution – With a well-designed compact body, you could use two invisible toggle anchor terminals CR07 at one corner METAL post of 4”x4” to 10”x10”, and they won’t hit each other. This fitting is also a great solution for posts against the wall or situations that you are unable to get behind to handle. You could use this as a fixed end terminal on the post of one side and use a tensioner Muzata CR26 on the post of another side.
  • Marine Grade – This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System – We pre-designed a BlackCool cable railing system to help you get a fully customized project, in....
Check Stock

Creality Ender CR Touch Auto Bed Leveling Sensor Kit, Upgrade Low Noise and More Durable Than BL Touch, for 3D Printer Ender 3 Ender 3 V2 Ender 3 Pro Ender 5 Ender 5 Pro

  • ...orm independently developed by Crealtiy. It is more stable than the traditional BL touch leveling function, and you can get better quality with less money product upgrade..
  • 【Strong Compatibility】CR Touch 3d printer auto-leveling is compatible with all printing platform materials such as PEI/sticker bed/glass bed/metal bed, etc. No matter what kind of printing platform material you use, it can adapt and work stably..
  • 【Longer Service Life】 Crealtiy CR Touch has been upgraded to a metal probe, which is more durable and can reduce the wear caused by daily use, thereby greatly increasing the service life of the probe, 0-6mm extension length, 0.04mm repeat positioning accuracy, automatic leveling , can be reused more than 100,000 times..
  • 【Compatible Models】This kit includes 3 different mounting brackets and extension cables. You can install it easily, and it can be adapted to more Crealtiy 3D printers. CR Touch works with Ender 3/Ender 3 V2/Ender3 Pro/Ender 3 Max/Ender 3S/Ender 5/Ender 5 Pro/CR 10 V3/CR-10. It should be noted that it is only applicable to 32-bit V4.2.2/V4.2.7 motherboard 3D printers. This CR Touch does not work for 8-bit motherboards, please clarify what version your motherboard is before buying..
Check Stock