Reviews Cr 10 Nozzle

CHPOWER CR-10 hotend Assembly MK8 Extruder Original Replacement for CR10/ CR-10S/ CR-10S400/ CR-10S500-12V 40W

  • This cr-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • 100% original and high quality 3D Printer accessories for CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, black wire is heating tube 12V 40W.
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon).
  • CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer service on all parts. Buy with confidence..
Check Stock

Micro Swiss Direct Drive Extruder for Creality CR-10 / Ender 3 Printers

  • Fits: CR-10 / CR-10-S5 / CR-10-S4 / CR-10S / CR-10 MINI / CR-20 / CR-20 Pro / Ender 2 / Ender 3 / Ender 3 Pro.
Check Stock

Sunhokey Extruder Assembled MK8 Hot End Kit for CR10 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle(12V 40W)

  • High-quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5..
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle..
  • MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 12V 40W..
  • Tip of the nozzle, aluminum heating block, throat pipe ..
Check Stock

CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm fit for Creality 3D Printing Printer CR-10 CR-10S S4 S5

  • Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY.
  • MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS.
  • CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 CR10 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W..
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

WINSINN 40mm RGB Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans LED Colorful 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of Pcs)

  • ✔️WINSINN 40mm RGB fan which micro size and lightweight design, fast and stable cooling, colorful when it works, bringing you unparalleled experience. So many 3D Printer and DIY enthusiasts are full of praise for it, and it will also be your best choice. The working voltage is 24V, which perfectly compatible a various 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place..
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.05A, Power: 1.2W, Speed: 5000PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA.
  • ✔️WINSINN 40mm RGB fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️Packing List: 4 x 40mm RGB Fan 24v, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
Check Stock

Micro Swiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers .4mm

  • Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 / TronXY X5S.
  • Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock.
  • This is a Drop in All Metal Conversion Kit for CR-10 printers.
Check Stock

BIGTREETECH Direct Metal Hotend with MK8 Nozzle CR10 Extruder Heatsink for CR10 Ender 3 Upgraded 3D Printer Parts

  • ⭐【Item Name】: All Metal MK8 Hotend CR10 Extruder Conversion Kit compatible with Creality Printers..
  • ⭐【CR10 Heatsink Hotend】: Strong and durable, imported aluminum quality, efficient heat transfer,Compatible with CR10S, Ender 3 Series and BIQU....
  • ⭐【Package Including】: 2 * 4mm PTFE Tube.
  • Compatible with 100K NTC 3950 thermistors.
  • Uses MK8 Nozzle and 6 * 20mm Heater Cartridge..
  • ⭐【Warm Notice】When replace the honted, should preheat the honted, setting the nozzle to 234°..
  • ⭐【Technical Support】If you have any question, please feel free to QA or tell us through Amazon, we will get back to you within 24h..
Check Stock

HICTOP CR-10 Hotend Full Assemble MK8 Extruder Fit for Creality 3D Printer CR-10 CR-10 mini CR-10S 3D Printer Replacement Parts

  • Easy for the CR-10 hotend to Assemble: Packed whole extruder kit, just fix it on X axis and connect to control box, it will work..
  • 2 Durable Quality: plug and play cr-10 hotend assembly with high quality..
  • 3 Fit for: Creality CR-10, CR-10S, CR-10 Mini and similar 3D printers.
  • 4 Stable Material: Aluminum, stainless steel, brass and MK8 nozzle.
  • 5 Extruder kit : cr-10 hotend with thermistor, heater carriage, and two cooling fans..
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

Upgrade 3D Printer Parts MK8 Extruder Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality 3D Ender 3,CR-7,CR-8 CR-10 CR-10S CR-10 S4 and CR-10 S5 Left Hand

  • [UPGRADING] Original Aluminum Drive Feed for Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5, it is stable and durable..
  • [REPLACEMENT] MK8 extruder drive feed kit, can replace acrylic parts of Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5.
  • [Easy to use: used] for 1.75mm filament of 3D printer MK8 bowden extruder frame.
  • [Stable and durable] Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original....
  • [Advantage] the metal extruder have better stronger pressure to pushing filament into printer nozzle so will improve the printer's performance. And....
Check Stock

Creality Upgraded MK-8 Metal Feeder Extruder Frame Aluminum Gray Bowden Extruder Drive for Creality Ender 3/3 Pro/3V2/5/5 Plus, CR-10 Series, CR -10S/20/20 Pro 3D Printer

  • WIDE APPLICATION: The extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware. Suitable for Creality 3D Printers Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro..
  • ADVANTAGES: Pushing the filament into the printer nozzle with more pressure to improve the performance of the printer. The bolt of our extruder kits is adjustable so that you can adjust the pressure of the extruder gear as needed..
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. This extruder DIY kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame..
  • STABLE: All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • CUSTOMER SUPPORT - If you have any problems with our product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you..
Check Stock

Creality Official Ender 3 Aluminum Extruder 3D Printer Ender 3 Extruder CR-10 Extruder Upgrade MK8 Drive Feed Bowden Extruders for Ender 3 Series Creality CR-10 Series Ender 5 Series

  • UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S,....
  • STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws....
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used....
  • ADVANTAGES: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve....
  • Trusted Vendor: CHPOWER is a TRUSTED VENDOR. Buy with confidence..
Check Stock