Reviews Cpvc Pipe

SharkBite U2016-0000LFA Check Valves, 3/4-Inch

  • For use with OD controlled copper, CPVC or PEX pipe.
  • No soldering, clamps, unions, or glue required..
  • Connects copper, PEX, and CPVC pipe in any combination..
  • Designed for vertical and horizontal installation.
Check Stock

Husky 5/8 in. Junior Tube Cutter

  • Husky 1-1/4 in. ratcheting PVC cutter cuts up to 1-1/4 in PVC (1-5/8 in. O.D.) for cutting PVC, CPVC, PP, PEX, PE, rubber hose.
  • Husky flexible tube cutter cuts PVC, CPVC, PEX pipe and flexible pipe.
  • Comes with foldable pouch for storage and transportation.
Check Stock

Stone Pro, Traverfill Pro Adhesive

  • Rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings - an essential first step before application of solvent cement.
  • Promotes maximum fusion between pipe and fitting during welding.
  • Specially formulated for wet and/or quick-set applications.
  • Compatible with all classes and schedules of PVC and CPVC.
  • Meets SCAQMD Rule 1168/316A, ASTM F656, NSF/ANSI 14, and NSF/ANSI 61 performance specifications.
  • contributes toward satisfying Indoor Environmental Quality credits for LEED v4.
Check Stock

Oatey 30795 Clear Cleaner, 16 oz

  • Clear Cleaner for ABS, PVC and CPVC pipe and fittings.
  • Lo-V. O. C. Cleaner meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
  • Fast acting cleaner removes surface dirt, grease and grime.
  • Lo-V.O.C. Cleaner meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check Stock

Oatey 30782 Clear Cleaner, 8-Ounce

  • Clear Cleaner for ABS, PVC and CPVC pipe and fittings.
  • Lo-V. O. C. Cleaner meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
  • Fast acting cleaner removes surface dirt, grease and grime.
  • Lo-V.O.C. Cleaner meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check Stock

WELD-ON 10225 P-70 Industrial Grade PVC/CPVC Non-Bodied Primer - Fast Acting and Low-VOC, Purple, 1 Pint (16 fl oz)

  • Rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings - an essential first step before application of solvent cement.
  • Promotes maximum fusion between pipe and fitting during welding.
  • Strong, aggressive priming action ideal for use in cold weather.
  • Compatible with all classes and schedules of PVC and CPVC and especially recommended for use on Schedule 80 and large-size pipe.
  • Meets SCAQMD Rule 1168/316A, ASTM F656, NSF/ANSI 14, and NSF/ANSI 61 performance specifications.
  • contributes toward satisfying Indoor Environmental Quality credits for LEED v4.
Check Stock

Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings

  • 【Package Includes】1 pcs disconnect tongs tool.
  • 1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
  • 【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
  • 【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
  • 【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..
Check Stock

Weld-On 10211 P-68 PVC/CPVC Non-Bodied Primer - Fast Acting and Low-VOC, Clear, 1 Pint (16 fl oz)

  • Rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings - an essential first step before application of solvent cement.
  • Promotes maximum fusion between pipe and fitting during welding.
  • Clear color helps prevent staining while priming.
  • Compatible with all classes and schedules of PVC and CPVC.
  • Meets SCAQMD Rule 1168/316A, ASTM F 656, NSF/ANSI 14, and NSF/ANSI 61 performance specifications.
  • contributes toward satisfying Indoor Environmental Quality credits for LEED v4.
Check Stock

Rectorseal 55929 1/4 Pint Cl-3L Low-Voc Pvc, Cpvc, Abs Cleaner

  • CL-3L is a clear cleaner for use on all PVC, CPVC and ABS pipe, tubing, and socket-type fittings.
  • Acts as a cleaner by dissolving grease and dirt and helping prepare the bonding surfaces for solvent cementing.
  • Helps make a clean, professional looking joint.
Check Stock

SharkBite 22187-0000LFA Ball Valve 1 Inch x 1 Inch, Water Valve Shut Off, Female, FNPT, Push-to-Connect, PEX, Copper, CPVC, PE-RT

  • INSTALLS IN SECONDS: 1 inch ball water valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating Applications..
  • COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX pipe tubing meets the same standards for commercial and residential plumbing applications.
Check Stock

Libraton PVC Pipe Cutter 2-1/2\

  • IMPROVED BLADE: The Libraton PVC pipe cutter blade is of SK5 material, and an improved hardness process can ensure its longer service life..
  • CUTTING RANGE: The PVC cutter is of large cutting range, up to 2-1/2-inch (63mm) outer diameter..
  • WIDE APPLICATION: The ratchet PVC cutter can be also applied to cut different plastics pipes and tubes (PVC, PEX, CPVC, PP-R, PE, Rubber Hose, etc.). It is not recommended for cutting THIN PVC pipe..
  • RATCHET DESIGN: The plastic pipe cutter is designed with a ratcheting driver so that you can do the pipe cutting job with one hand easily. OUR TEST SHOWS THAT ONE CUT WITHIN 5 TO 20 SECONDS ONLY..
  • AFTER-SALES SERVICE: We offer a 12-month warranty on this PVC pipe cutter. And our after-sales service team promise to reply to your ANY question WITHIN 24H to help you solve ANY problem with the PVC cutter..
Check Stock

Metpure 2-Hole Pipe Clamp Grey 1/2\ Plastic [10 Pack]

  • [FUNCTION] This pipe clamp will hold a perfectly snug fit around your 1/2 inch pipe, and isolates supply tubing from wood framing.
  • [COMPATIBILITY] This 2-hole pipe clamp will securely mount most standard 1/2 inch copper, PEX, CPVC and other piping systems.
  • [SUPREME QUALITY] Highly durable hard plastic design which provides a reliable and long-lasting performance.
  • [QUIET PIPES] This will cushion your pipes, and reduce banging, clapping, chattering, clicking, and ticking from your old pipelines..
  • [FLEXIBILITY] Flexible ribbed plastic design allows for movement, heating and cooling, and expansion and contraction..
Check Stock

scottchen PRO Inside Pipe Cutter 1-1/2\(36mm) Internal PVC Plastic Pipe Cutting Tool Diamond Cutting Blade-1set

  • 【Function】This inner pipe cutting tool excellent to cut the pipe from inside which normal pipe cutter hard to reach..
  • 【Size】The pipe cutter diamond cutting blade is 1-1/2” diameter, suitable for cutting 1-1/2” and above size pipe. The shank 4” length, can reach deeper place to do cutting project..
  • 【Appliance】This plumbing tool ideal for various pipe cutting, such as: PVC, HDPE, CPVC and ABS plastic etc, fast cutting without melting the pipe..
  • 【Guide wheel】The bottom guide wheel great for fast and stable pipe cutting, minimizes vibration during the work progress, form a perfect straight cutting edge appearance..
  • 【Installation】The internal PVC cutter easy to install (detail as image). The shaft with 1/4” hex head quick mount to hand power drill. NOTE: Must rotary Anti-clockwise. Before cutting, please put something in the pipe to prevent it from falling off..
Check Stock