Reviews Cpu Heat Sink

DGZZI CPU Fan Retainer Bracket 4PCS Black CPU Fan Support Bracket for AM4

  • The AMD CPU fan plastic bracket is used to fix the CPU and the radiator, which is durable..
  • Replaced with AMD CPU fan for AM4 slot computer..
  • Compatible with AMDSocket AM4 motherboard and heat sink..
  • It is best to use this CPU fan support frame to dissipate heat from the motherboard, with good heat dissipation to ensure the normal operation of the CPU..
  • Designed to replace the damaged radiator mounting bracket of the motherboard..
Check Stock

RLECS CPU Fan Retainer Bracket 4PCS Yellow CPU Fan Support Bracket CPU Motherboard Bracket Clips for AM2/AM3

  • The AMD CPU fan plastic bracket is used to fix the CPU and the radiator, which is durable..
  • Compatible with AMD Socket AM2/AM3 motherboard and radiator..
  • Replace the AMD CPU fan for the AM2/AM3 slot machine..
  • It is best to use the CPU fan bracket to dissipate heat from the motherboard, which has a good heat dissipation effect and ensures the normal operation of the CPU..
  • Designed to replace the damaged heat sink mounting bracket on the motherboard..
Check Stock

MSI Arsenal Gaming Intel Z170A LGA 1151 DDR4 USB 3.1 Micro ATX Motherboard (Z170M Mortar)

  • LGA1151 Supports 6th Generation Intel Core i7/ i5/ i3/ Pentium/ Celeron Processors Chipset: Intel Z170.
  • Memory: 4x DDR4-3600(OC)/ 3200(OC)/ 3000(OC)/ 2800(OC)/ 2600(OC)/ 2400/ 2133 Slots, Dual Channel, ECC, Unbuffered, Max Capacity of 64GB .Install CPU/heat sink fan in the motherboard first before mount inside case, by properly installation of CPU and heat sink fan will prevent bent pin on motherboard CPU socket..
  • Slots: 2x PCI-Express 3.0 x16 Slots (one runs at x4), 2x PCI-Express 3.0 x1 Slots, 1x M.2 Wi-Fi Module Slot.
  • Storage: 6x SATA3 Ports, Support RAID 0, 1, 5, 10.
  • Form Factor: MicroATX, 9.6 x 9.6 inch / 24.4 x 24.4 cm.
Check Stock

Water Cooling Kit,DIY PC Water Cooling Kit,PC 240mm Heat Sink CPU Water Block LED Fan Computer Cooling Kit Water Chiller Water Cooling Systems

  • CPU Block: The CPU block is constructed with a copper base to provide exceptional heat transfer and cooling performance. Cylindrical Water Reservoir: The cylindrical water reservoir is manufactured from high quality transparent acrylic so that the circulation system is visible.Water Pump: Waterproof, stable, high quiet, long life. 240mm Heat Sink: Provide the excellent heat dissipation, as you need for highly overclocked desktop processors..
  • LED Cooling Fan: The excellent performance cooling fan offers a high air static pressure with lower noise.6 Rigid Tube: Can be bent when heating, also can be cut to meet your need..
  • 1 * 240mm black heat sink (with screw bag).
  • Suitable tube: Diameter of 8-10mm/ 0.3-0.4in.
  • Application: water cooling system heat exchange.
  • Surface treatment: powder coating.2 * LED fans.
  • Power supply interface: large 4Pin small 3Pin.
  • Description: Universal for INTEL / AMD Dual Platform (For INTEL 775, 1150, 1155, 1156, 1366) (For AMD: AM2, AM3, AM3 ).
  • Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation..
Check Stock

Cooler Master GeminII M5 LED - 2U Low Profile CPU Cooler with 5 Direct Contact Heatpipes & XtraFlo 120 Slim Fire Red LED PWM Cooling Fan for Intel AMD RR-T520-16PK (GeminII M5)

  • Cooler Master GeminII M5 LED - 2U Low Profile CPU Cooler with XtraFlo 120 Slim "Fire Red" LED PWM Cooling Fan and 5 Direct Contact Heat Pipes,5 Direct Contact Heat Pipes 62.7mm/2.5in Low Profile Design for 2U / HTPC.
  • XtraFlo 120 Slim "Fire Red" LED PWM Fan 500 - 1600 RPM, 50.43 CFM MasterGel Pro Thermal Grease.
  • Specifications: Intel Socket: LGA 1156 / 1155 / 1151 / 1150 / 1366 / 775 Core i7/i5/i3 Core 2 Extreme Core 2 Quad Core 2 Duo Pentium/Pentium G Celeron/Celeron D AMD Socket : FM2+ / FM2 / FM1 / AM4/AM3+ / AM3 / AM2+ / AM2 FX X8/X6/X4 APU A10/A8/A6/A4 Phenom II X6/X4/X3/X2 Phenom X4/X3/X2 Athlon II X4/X3/X2 Athlon X4/X2 Athlon Business Class Sempron Overall Dimensions: 131 x 123 x 62.7 mm (5.2 x 4.8 x 2.5 inch) Overall Weight: 393g / 0.86 lb.
  • Heat Sink: Heat Sink Dimensions: 130.1 x 120 x 45.5 mm (5.1 x 4.7 x 1.8 inch) Heat Sink Material: Copper Heat Pipes / Aluminum Fins Heat Pipes Dimensions: ø6mm (0.24 inch) Fan: Fan Dimensions: 120 x 120 x 15 mm (4.7 x 4.7 x 0.6 inch) Fan Speed: 500-1600RPM(PWM)±10% Fan Air Flow: 50.43 CFM ± 10% (@ 1600RPM) Fan Air Pressure: 1.3 mm H2O ± 10% (@ 1600RPM) Fan Life Expectancy: 40,000 hours (>4 years constant use) Fan Noise Level: 6-30 dBA Bearing Type: Long Life Sleeve.
  • Redefining cooling performance for space ....
Check Stock

E-outstanding AM4 Backplane Black Durable CPU Heatsink Bracket Motherboard CPU Fan Cooling Mounting Sheet Plate for AMD AM4 B350x370 A320x470

  • Made of copper and plastic, it has good heat dissipation, prevents deformation and has a long service life..
  • Good heat dissipation to ensure the normal operation of the CPU..
  • There is a small hole on the pin on the motherboard, which is firm and practical.
  • This CPU fan mounting bracket is designed to replace the motherboard's hardware heat sink to install hardware..
  • Only the base of the CPU fan bracket, the CPU fan is not included here..
Check Stock

RLECS AM4 Backplane Black Durable Iron CPU Fan Water Cooling Mounting Sheet Plate Heatsink Bracket with Mounting Brackets and Screws for AM4 AMD

  • The CPU fan mounting bracket is used to replace the hardware heat sink on the motherboard..
  • The iron and plastic are integrated, the heat dissipation is good, the deformation is prevented, and the service life is long..
  • The back is covered with an insulation layer, which is safe and reliable to use..
  • Good heat dissipation ensures the normal operation of the CPU..
  • Designed specifically for AMD AM4 CPU motherboards..
Check Stock

DEEP COOL GAMMAXX GTE V2 CPU Air Cooler with 4 Heatpipes and a 120mm RGB PWM Fan 4-Pin 12V RGB Motherboard Control for Intel LGA 1200 1151 AMD Ryzen AM4

  • Effective CPU Cooling Performance - A dense heat sink tower and strong airflow with 64.5 CFM at a comfortable max noise levels of just 27 dBA helps cool any gaming PC.
  • 120mm RGB PWM Fan - Adjust PWM fan speeds between 500-1650 RPM for high performance cooling or quiet low-noise.
  • Direct contact - 4x 6mm copper heat pipes transfer heat from the cpu and into the heat sink tower for rapid dissipation.
  • Motherboard RGB Control - Sync with your build through a 12V RGB pin header and customize lighting through supported software..
  • Easy to Install - The updated mounting system is compatible with AMD AM4 AM3 and Intel LGA 1200 1151.
Check Stock

JONSBO CR1100 Fully-Covered CPU Cooler, 120mm PWM Cooling Fan, 200W TDP 6 Heat Pipes, ARGB CPU Fan, AMD Ryzen AM4 AM3, Intel LGA 1200 115X, Addressable RGB CPU Air Cooler, Grey

  • Double Fans DesignCR1100 RGB Air Cooler is armed with 2 reverse fans with blades pressurization design to attribute cross-ventilation efficiency and enhance heat dissipation capacity. And the speed can be regulated through PWM.
  • 6 Copper Heat-pipes The 6 6mm copper and vacuum heat-pipes of this cooling fan for CPU can directly connect to the CPU. Thus, the heat can be transferred to the fins quickly without any obstacles with the CNC craft. And it adopts 45 inserted fins, the heat pipes and fins can be closely connected, the heat conduction system is easy to work.
  • Fully-covered CPU CoolerJonsbo CR1100 RGB CPU Cooler, Single-tower and fully-covered wind hood design, performs good with the high-cost metal buckles and luminous nameplate on the top of heat sink. And the top cover can be removed and customized as you like.
  • 5V 3Pin ARGBBe made of the Grille type RGB and acrylic lighting material, the RGB system of this RGB CPU Cooler can synchronize with the PCB of the PC. And it can achieve various of lighting modes, such as colorful, breathing, monochrome and audio linkage. 16 million lighting effects can be totally provided.
  • CPU Socket SupportIntel: LGA1200/775/1150/1151/1155/1156. AMD: AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1.
Check Stock

Pastall 100 PCS (8 Different Sizes) Heatsink Kit with Conductive Adhesive Tape, Aluminum Heat Sink Cooler and Copper Heatsink for Raspberry Pi A B B+ 2/3/4

  • ❤ The 100 PCS (8 Different Sizes) heatsink kit with conductive adhesive tape, Easy to use and could effectively provide good heat dissipation..
  • ❤ As a Raspberry Pi heat sink (using as raspberry pi 4 heatsink/raspberry pi 3B+ heatsink), it has good heat dissipation performance and compatible with most Raspberry Pi cases..
  • ❤ The heat sink is equipped with high-performance thermal conductive adhesive, high viscosity, durable and long lasting..
  • ❤ This small heatsink kit included : 80 pcs aluminum heatsink + 20 pcs copper heatsink( It Contains 8 different sizes of heat sink,Please check the specific size on the picture)..
  • ❤ the heatsinks also could be used for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator.It is an excellent heat sink for heat dissipation in electronic DIY,You will love it!.
Check Stock

Iceberg Thermal IceFLOE T95 Extrusion Aluminum Heatsink CPU Cooler with 92mm PWM Fan (Standard)

  • 【HIGH-QUALITY MATERIALS】Using aluminum extruded heat sink, excellent heat dissipation performance, protect CPU from being burned..
  • 【LOW-PROFILE DESIGN】Ultra-compact low-profile cooler with only 45mm total height.It is silent CPU cooler, no noise, very comfortable to use..
  • 【DIRECT CONTACT TECHNOLOGY】Direct touching copper base is adopted to fit CPU, as well as improving optimal contact area and thermal conductivity..
  • 【IMPROVED EFFICIENCY】With bearings of the highest quality and a newly developed engine,the fan is very silent,efficient and durable..
  • 【COMPATIBILITY】Suitable for AMD AM2 AM3 AM3+ FM1 FM2 FM2+.The installation is very convenient and you can do it yourself..
Check Stock

Intel 60188-001 SKT-775 Active Copper Core CPU Cooler for Intel XEON 3XXX

  • Intel Socket 775 Copper Core Heat Sink with Fan General Features: For Socket 775 CPU.
  • Aluminum Heat Sink Copper core Supports up to Intel Core 2 Duo E6550 (2.33 GHz) 3.5-inch fan attache.
  • 4-pin connector DC12V 0.60A Regulatory Approvals: UL CE.
  • Supports up to Intel Core 2 Duo E6700 (2.66 GHz).
Check Stock

PC Water Cooling Kit DIY Water Cooling Kit with Cooler CPU/GPU Block Cylindrical Water Reservoir Pump LED Fan 240mm Heat Sink Connectors Kit All-in-one Liquid Computer Water Cooling Set

  • CPU / GPU Block: The CPU/GPU block is constructed with a copper base to provide exceptional heat transfer and cooling performance. Universal CPU block for INTEL / AMD Dual Platform (For INTEL 775,1150,1155,1156,1366,) (For AMD: AM2, AM3, AM3 +) Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation..
  • Cylindrical Water Reservoir: The cylindrical water reservoir is manufactured from high quality transparent acrylic so that the circulation system is visible..
  • Water Pump: Waterproof, high stability, quiet, long lasting. 240mm Heat Sink: Provide the excellent heat dissipation, as you need for highly overclocked desktop processors..
  • Transparent Hose: Upgraded flexible anti-explosion, hoses enable a space-saving installation and exceptional durability..
  • LED Fan: The extreme performance dual fans offer a high air static pressure with lower noise. Appearance size: 12 * 12cmPower supply interface: large 4Pin + small 3Pin.
Check Stock