Reviews Countersunk Screw Anchor

General Tools 806 Jiffy Centering Punch, Silver

  • The Jiffy Centering Punch makes centering screw holes for hinges, locks, brackets and other countersunk hardware.
  • The tool's tapered end fits inside the hinge or bracket screw hole for automatic centering.
  • For quickly starting screw holes when attaching countersunk hardware such as hinges, hasps, hangers and drawer pulls.
  • Countersunk end ensures starting hole is centered in hardware screw hole.
  • Hardened steel pin for repeated punching and makes easily identifiable marks in wood surfaces.
  • Length: 2-1/2" (68mm). Body diameter: 3/8" (10mm).
Check Stock

Accusize Industrial Tools H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 508S-0007

  • Inch Set (7 PC) : 6#, 8#, 10#, 1/4'', 5/16'', 3/8'', 1/2''.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Accusize Industrial Tools 7 Pc Metric Hss Solid Capscrew Counterbore Set 3 Flute Straight Shank 508S-007m

  • Metric Set (7PC): M3, M4, M5, M6, M8, M10, M12. 3 Flute..
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Accusize Industrial Tools Premium Metric H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 509S-007M

  • High Speed Steel. Straight Shank. Metric Set(7 Pcs/Set): M3, M4, M5, M6, M8, M10, & M12.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

12Pcs Black Shelf Brackets, 5

  • Size: 125 x 75 x 20 mm (L x H x W) / 5 x 3 x 0.78 inch.
  • 【COUNTERSUNK SCREW HOLES】 Screw holes are countersunk design.
  • 【HEAVY DUTY CORNER SHELF BRACE】Durable metal corner brackets are made of high quality cast iron with black coated finish, corrosion and rust resistance.
  • The head of screw is not protruding after the screw has been screwed in, simple and aesthetic appearance.
  • 【5″x3″ RIGHT ANGLE BRACKETS】Package include: 12pcs L brackets, 72pcs screws and 24pcs expansion pipes.
  • 【WIDE APPLICATIONS】 Black 90 degree bracket is perfect for shelving systems, widely used in bookshelf, furniture, table, garden and kitchen shelf.
  • Curved design makes the edge smooth and protect your hand from scratch.
  • 【STRONG BEARING CAPACITY】 Heavy duty corner bracket has 3MM thick, thicker than other corner supports on the marketapply.
  • So the maximum support weight is 35lbs for a pair of L brackets.
Check Stock

Gusset Commer Grade .25x1.25x8

  • The bracket holder is injection molded hard plastic with countersunk screw hole for firm installation.
  • Unique three-connect stent fixed design, can fix three electric machinery once, placed beautiful.
  • Easy to fix electric machinery / tools and on the table and wall, clean and tidy.
  • Suitable for the fixing of for 14.4V/18V/60V electric machinery at the same time, perfectly match.
  • Adopt good‑quality ABS material, possess impact resistance, scratch resistance, environmental protection.
Check Stock

100#8 Countersunk Finish Washer Black Zinc Plated Brass

  • Material:Made of high quality 304 Stainless Steel,corrosion resistant, sturdy and durable..
  • Shiny washer that allows the screw to recess into the center giving a clean,decorative presentation..
  • Finish washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance..
  • Washers are great to have around for use in wood and wet environments.Washers are usually used where larger outside diameters are required to increase the bearing surface and reduce the surface load..
  • Package included:100pcs #8 Countersunk Washers.The washer is designed for flat head or oval head screws..
Check Stock

Fastcap - Black (5-Pack) - 3-1/2" x 12" Speedbrace for Granite Counter-top Support, 300 Pound Load Capacity - 08176

  • POWER COATED STEEL: Made of thick 3/16'' powder-coated steel.
  • 300 POUND SUPPORT: Supports your countertop with ease.
  • NOT VISIBLE: Nearly invisible when installed.
  • COUNTERSUNK SCREW HOLES: Screw holes are countersunk into the brace for a flush installation.
Check Stock

TOUHIA 50pcs #8 Finishing Washers Stainless Steel Cup Countersunk Washer

  • Package Content: 50pcs x Finishing Cup Washers.
  • Finish Washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance.
  • Countersunk washer can prevent a nut, bolt or screw from pulling through the material. Commonly used in automotive, pipe, and other electrical applicance.
  • Material: These finish washers are 100% Stainless Steel, corrosion resistant and rust resistant, can be used for a long time.
  • Risk Free Shopping: TOUHIA offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

30Pcs Black L Bracket Cast Iron 2” x 2” Corner Brace Heavy Duty 90 Degree Angle Bracket for Shelves Metal Corner Bracket for Wood Bed Furniture Cabinet

  • 【Premium Material】Black l bracket made of Cast Iron with exquisite technology, durable and rust proof.
  • 【Corner Bracket Size】50 x 50 x 17 mm (L x H x W) / 1.96 x 1.96 x 0.67 inch.
  • Tickness:2 mm/0.08 inch； Hole Quantity: 4 holes.
  • 【Wide Applications】The right angle brackets can be used in a variety of furniture and hardware accessories, perfect for fastening chair, table,....
  • 【Countersunk Screw】Screw holes are countersunk design.
  • The head of screw is not protruding after the screw has been screwed in, simple and....
  • 【Package Include】30 Pcs Stainless Steel L Bracket, meet your daily requirements to make furniture parts stay firm.
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

2.4 x 1.5 Inch Metal Flat Straight Brace Bracket 1.2 MM Thickness Metal Flat Straight Mending Plates Fixing Corner Brace 12 Pcs for Furniture, Wood, Shelves, Cabinet

  • Premium Material: Mending bracket plate made of Metal with exquisite technology, Smooth surface and edges without burrs..
  • Bracket Size: 38 x 60 mm / 1.5 x 2.4 inch.
  • Tickness:1.5 mm£» Hole Quantity: 4 holes.
  • Wide Applications: The flat corner brace can used in a variety of furniture and hardware accessories, perfect for fastening chair, table, window, furniture, dresser, shelf, drawer, etc..
  • Countersunk Screw: Screw holes are countersunk design.
  • The head of screw is not protruding after the screw has been screwed in, simple and aesthetic appearance..
  • Package Include: 12 Pcs Repair plate bracket and 48 Pcs screws, meet your daily requirements to make furniture parts stay firm.
  • Remove the protective film on the surface before using the brackets..
Check Stock