Reviews Countersunk Mounting Bolt

GREATMAG Cup Magnets, Industrial Strength Round Base Magnets, 100 lbs Holding Force, 1.26 Inches Diameter, Countersunk Hole, Pack of 10

  • HIGH QUALITY: ISO 9001 quality system and made of High-quality Neodymium countersunk magnet and Carbon Steel. Neodymium cup magnet with countersunk center hole that is perfect for mounting with a flat head screw or bolt..
  • HOLDING FORCE: Unbelievable holding force, up to 100 lbs holding power, amazing powerful and sturdy..
  • MULTI PURPOSE: Perfect for organizing and hanging in workshop, and decluttering your home, garage, business and schools. Holding, Lifting, Fishing, Closing, Retrieving, and much more..
  • VERY DURABLE: Cup magnet will not break in normal use since the magnet is protected inside the Carbon Steel Cup which greatly increase the longevity of the magnet..
  • GREATMAG BRAND: Professional manufacturer of rare earth neodymium magnets and magnetic assemblies. To be “your magnet solution source”..
Check Stock

Extremely Strong Neodymium Cup Magnets - 90 lbs Holding Force - 1.26' Industrial Strength Round Base Rare Earth Magnets - Countersunk Hole for #10 Bolt, 3 Mounting Screws Included

  • GREAT EXTREMELY STRONG NEODYMIUM MAGNETS - For holding or attaching objects to surfaces with magnetic properties. Single round magnet's measures 1.26" (32mm) in DIAMETER and 0.31" (8mm) in HEIGHT. PULL FORCE: 90 LBS (3 Mounting Screws Included).
  • SUPER EASY MOUNTING: COUNTERSUNK HOLE for easy use with #10 SCREW! This allows the screw head to sit below or flush with the magnets surface. The counter sunk hole on the magnet works with flat head screw to affix onto walls or cabinets.
  • NI+CU+NI TRIPLE LAYER PLATED, THE BEST COATING AVAILABLE. Tight tolerance +/-0.002". MAX OPERATING TEMPERATURE: 80°C/176°F MAGNETIZED THROUGH THICKNESS so that the N and S poles are on the opposite flat surfaces.
  • LIMITLESS USES: Base Rare Earth N52 Magnets with Countersunk Hole for #10 Bolt USE FOR A WIDE VARIETY OF PROJECTS. Industrial N52 Strength magnets are great above the workbench to hold tools that you use consistently, so they are within easy reach. Rare earth cup magnets will hold up some of your heavier hand tools quite well and very easily. The applications of this round base magnet include magnetic holding, lifting, antenna Mounting, positioning, meteorite hunting, tool magnetizer, magnetic t.
  • HIGHEST QUALITY WITH A WARRANTY: X-bet MAGNET makes top neodymium magnets....
Check Stock

Anmas 30pcs M6 Length 20mm Furniture Joint Connector Bolt & Cap Nut Kit Use for Cot Bed Crib Bolts Hex Drive Socket Cap Bolts - Hex Socket Screws Head

  • Package Included: 30pcs x M6 Nut & Countersunk Bolt.
  • Used for: bed, table, chair, crib, or workbench, boards, cabinets, cupboards, other furniture.
Check Stock

POWERTEC 71144 30-Inch Miter Gauge Jig and Fixture Bar for Woodworking

  • INCLUDES: (1) Jig and Fixture Bar with a set of 10-32 nylon adjustment screws (mounting hardware).
  • APPLICATION: A necessary addition to your collection of workshop tools for creating woodworking jigs and fixtures for your router table, band saw or....
  • FUNCTIONAL DESIGN: Features 6 countersunk mounting holes along the top of the bar (plus an additional non-countersunk hole), with 8 tapped holes....
  • VERSATILITY: The top mounting holes are 5” on center, while the side mounting holes are 3-3/4” on center – providing you with a host of mounting....
  • QUALITY BUILD: This miter gauge bar is manufactured with high precision aluminum – delivering a polished profile, excellent fit and long-term....
Check Stock

Oatey 43551 Replacement Ring, for Use with 4 in Closet Flanges, 3-Inch or 4-Inch, Brass

  • 3 countersunk holes and 3 closet bolt slots for secure attachment to the floor.
  • 3-Inch Spigot Closet Flange fits inside the hub end of 3-Inch Schedule 40 DWV fitting.
  • 4-Inch Spigot Closet Flange fits inside the hub end of 4-Inch Schedule 40 DWV fitting.
  • Solvent weld into fitting-short throat length is perfect for use in tight spaces and where the fitting is close to the sub-floor.
  • Four mounting slots for proper fit and alignment of closet bolts to the toilet.
Check Stock

MIKEDE Strong Magnets with Hole, 100lb + Heavy Duty Neodymium Cup Magnets with Stainless Screw for Wall Mounting, Rare Earth Magnets Round Base Cup Magnets, 1.26'D x 0.2'H, Pack of 6

  • 【Powerful Magnetic Force】- Our round base cup magnets are made of rare earth neodymium metal material, which makes their magnetism very strong. Each magnet is 1.26 inch (32mm) in DIAMETER and 0.24 inch (6mm) in HEIGHT. PULL FORCE: 100 LBS+ (Vertical).
  • 【More Durable than Others】- These countersunk magnets with hole are made of NdFeB material with a nickel-plated coat for maximum durability and protection against corrosion. Steel cups protects magnets from breaking which greatly increase the longevity of the rare earth cup magnets.
  • 【Easy to Install】- These countersunk hole magnetic discs for easy use with 6 screw(Included), which makes you able to use them in two different ways. You can not only use these industrial magnets on metallic items, also on non-metallic items. The neodymium cup magnets with countersunk center hole that is perfect for mounting with a flat head screw or bolt.
  • 【Useful Magnetic Tools】- These strong industrial cup magnets are great above the workbench to hold tools that you use consistently, so they are within easy reach. The heavy duty neodymium cup magnets will hold up some of your heavier hand tools quite well and very easily. Perfect for organizing and hanging in workshop, and decluttering your home, garage, busin....
Check Stock

uxcell M3 x 10mm Metric Hex Socket Countersunk Flat Head Screw Bolts 100PCS

  • Package Content: 100(+/-2%) x Countersunk Bolts.
Check Stock

Carriage Bolt 18-8 Stainless Steel 1/2'-13 x 18' Qty-25

  • A carriage bolt has a domed or countersunk head and the shank is topped by a short square section under the head of the bolt..
  • The square section grips into the part being fixed, preventing the bolt from turning when the nut is tightened..
  • Carriage bolts are often used to fasten wood panels or board to masonry or to one another..
  • The square shank of the bolt allows it to lock into place when inserted into a round hole in wood or a square hole in a metal strap, the unthreaded square shank pulls into the wood creating a tight connection..
  • 18-8 Stainless steel is corrosion and rust resistant. 18-8 Stainless steel is considered the fastener industry standard..
Check Stock

TOUHIA 50pcs #8 Finishing Washers Stainless Steel Cup Countersunk Washer

  • Package Content: 50pcs x Finishing Cup Washers.
  • Finish Washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance.
  • Countersunk washer can prevent a nut, bolt or screw from pulling through the material. Commonly used in automotive, pipe, and other electrical applicance.
  • Material: These finish washers are 100% Stainless Steel, corrosion resistant and rust resistant, can be used for a long time.
  • Risk Free Shopping: TOUHIA offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.
Check Stock

POWERTEC 71520-P2 36-Inch Miter Gauge Jig & Fixture Bar for any Standard 3/4" x 3/8" Miter Slot/Crosscut Sled, Woodworking, Router Table, Band Saw, Table Saw, 2PK

  • INCLUDES: (2) Jig and Fixture Bar with a set of 10-32 nylon adjustment screws (mounting hardware).
  • APPLICATION: A necessary addition to your collection of workshop tools for creating woodworking jigs and fixtures for your router table, band saw or table saw.
  • FUNCTIONAL DESIGN: Features 7 countersunk mounting holes along the top of the bar (plus an additional non-countersunk hole), with 9 tapped holes (10/32”) on the side – All holes are clean and burr free.
  • VERSATILITY: The top mounting holes are 5” on center, while the side mounting holes are 4” on center – providing you with a host of mounting options.
  • QUALITY BUILD: This miter gauge bar is manufactured with high precision aluminum – delivering a polished profile, excellent fit and long-term durability.
Check Stock

POWERTEC 71144-P2 30-Inch Miter Gauge Jig & Fixture Bar for any Standard 3/4" x 3/8" Miter Slot/ Crosscut Sled, Woodworking, Router Table, Band Saw, Table Saw, 2PK

  • INCLUDES: (2) Jig and Fixture Bar with a set of 10-32 nylon adjustment screws (mounting hardware).
  • APPLICATION: A necessary addition to your collection of workshop tools for creating woodworking jigs and fixtures for your router table, band saw or table saw.
  • FUNCTIONAL DESIGN: Features 6 countersunk mounting holes along the top of the bar (plus an additional non-countersunk hole), with 8 tapped holes (10/32”) on the side – All holes are clean and burr free.
  • VERSATILITY: The top mounting holes are 5” on center, while the side mounting holes are 3-3/4” on center – providing you with a host of mounting options.
  • QUALITY BUILD: This miter gauge bar is manufactured with high precision aluminum – delivering a polished profile, excellent fit and long-term durability.
Check Stock

POWERTEC 71518-P2 18-Inch Miter Gauge Jig & Fixture Bar for for any Standard 3/4" x 3/8" Miter Slot/Crosscut Sled, Woodworking, Router Table, Band Saw, Table Saw, 2PK

  • INCLUDES: (2) Jig and Fixture Bar with a set of 10-32 nylon adjustment screws (mounting hardware).
  • APPLICATION: A necessary addition to your collection of workshop tools for creating woodworking jigs and fixtures for your router table, band saw or table saw.
  • FUNCTIONAL DESIGN: Features 6 countersunk mounting holes along the top of the bar (plus an additional non-countersunk hole), with 6 tapped holes (10/32") on the side – All holes are clean and burr free.
  • VERSATILITY: The top mounting holes are 3" on center, while the side mounting holes are 3” on center - providing you with a host of mounting options.
  • QUALITY BUILD: This miter gauge bar is manufactured with high precision aluminum – delivering a polished profile, excellent fit and long-term durability.
Check Stock

Guolarizi Handedness Right 304 Off Stainless Polished Hinge Steel Lift Home Textiles (Sliver)

  • 【Stainless Steel Piano Hinges】The Piano hinge is Composed of extremely durable 304 Stainless Steel with polished surface, rust proof, durable and prevents misalignment..
  • 【4PCS 16" Piano Hinge】Package Include 4pcs 16in continuous hinge, It includes screws, and there are 2 in. spacings between each screw hole. Each knuckle of continuous hinge is a load-bearing point, providing uniform strength and smooth pivot action.
  • 【Easy to Cut】This 1-3/16 in. x 16 in. continuous hinge can be cut to the length needed for your project and it is ideal for folding tables, cabinets, tool sheds, chests and cabinets..
  • 【Countersunk Mounting Holes】16 inch hinges with holes have countersunk mounting holes to aid surface-mounting to door or frame. They provide more stability than traditional hinges, making them ideal for heavier doors and lids that require extra support..
  • 【Heavy Duty Conceal Box Hinges】The piano hinges offer continuous supports along the entire length of the door and lid for durability. Continuous hinges are ideal for various doors, cabinet, tool box, wooden box, gift box..
Check Stock