Reviews Corrugated Pipe Extruding

Flex-Drain 52011 Flexible/Expandable Landscaping Drain Pipe, Solid, 4-Inch by 50-Feet

  • Connects over 3" corrugated pipe, inside 4" corrugated pipe and 4" PVC pipe.
  • Bends around almost anything – no elbows needed.
Check Stock

Flex-Drain 51510 Flexible/Expandable Landscaping Drain Pipe, Perforated with Filter Sock, 4-Inch by 25-Feet

  • Solid corrugated flexible pipe. Expands from 6’ to 25’.
  • Connects over 3" corrugated pipe, inside 4" corrugated pipe and 4" PVC pipe.
  • Does not allow water to seep in or out anywhere except pipe ends.
  • Bends around almost anything – no elbows needed.
Check Stock

Cleveland Tubing Perforated Corrugated Expandable Flexible Landscape Drain Pipe with Sock, 4-in. by 25-ft.

  • Connects over 3" corrugated pipe, inside 4" corrugated pipe and 4" PVC pipe.
  • Bends around almost anything – no elbows needed.
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine 110V Extruder

  • 1.[Description]: Voltage: 110V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe+holder+flat welding shoe+corner welding shoe+heating elements for hot air blower+disassembly tools+operation manua....
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine (220V Extruder)

  • 1.[Description]: Voltage: 220V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
Check Stock

Premium USA Made 6' Inch Outdoor Round Atrium Drain Grate Cover - Fits All 6' Inch Sewer & Drain Pipe / Fittings, Also Fits Triple Wall Pipe & Corrugated Landscape Pipe 6' (Black)

  • FIT : Fits All 6" Inch Sewer & Drain Pipe / Fittings, Also Fits Triple Wall Pipe & Corrugated Pipe 6".
  • PREMIUM QUALITY - manufactured from a structurally foamed High Density Polyethylene (HDPE) with a UV inhibitor to reduce sun damage. This grate is designed with large opening slots for maximum flow while still preventing large debris from entering the drainage system. Capable of withstanding pedestrian, bicycle and wheelchair traffic..
  • EASY INSTALL - Precision engineered and manufactured to attach directly to Sewer and Drain Pipe and Fittings, Triple Wall Pipe and Corrugated Pipe. Easy to use, installs in minutes and blends well with the landscape..
  • FITS MOST BRANDS - COMPATIBLE WITH NDS, DURA, ETC..
  • APPLICATION - Typical application would be for direct attachment to Drainage Pipe where a catch basin is not appropriate or feasible. Available in 3″, 4″ and 6″ diameters..
  • ADA compliant - recommended for pedestrians, bicycles, and wheelchair traffic.
  • EXACT FIT: 6” Sewer Pipe (ASTM D3034, SDR 35), 6” S and D Pipe (ASTM D2729), 6” Corrugated Pipe, 6” S and D Fittings (SDR 35), 6” Round Catch Basin..
Check Stock

Cleveland Tubing Perforated Corrugated Expandable Flexible Landscape Drain Pipe, 4-in. by 12-ft.

  • Pipe unfolds and expands from 15-inches to 12-feet.
  • Perforated pipe is for ground water drainage (French drains, dispersing water from flower beds) where soil is coarse.
  • Compatible with most traditional 3-inch and 4-inch corrugated pipe and 4-Inch PVC.
  • 30-Percent higher load-bearing rating than standard corrugated pipe.
Check Stock

Flex-Drain 51910 Flexible/Expandable Landscaping Drain Pipe, Perforated, 4-Inch by 12-Feet

  • Pipe unfolds and expands from 15-inches to 12-feet.
  • Perforated pipe is for ground water drainage (French drains, dispersing water from flower beds) where soil is coarse.
  • Compatible with most traditional 3-inch and 4-inch corrugated pipe and 4-Inch PVC.
  • 30-Percent higher load-bearing rating than standard corrugated pipe.
Check Stock

Flex-Drain 51710 Flexible/Expandable Landscaping Drain Pipe, Solid, 4-Inch by 12-Feet by Flex-Drain

  • Pipe unfolds and expands from 4 to 50-feet.
  • Solid pipe helps move water from one point to another.
  • Compatible with most traditional 3-inch and 4-inch corrugated pipe and 4-Inch PVC.
  • 30-Percent higher load-bearing rating than standard corrugated pipe.Maximum working pressure (psi):70.
Check Stock

Flex-Drain ADP53102 Downspout Adaptor, Landscaping Drain Pipe Adapter 3 by 4 by 4-Inch , Black

  • Compatible with most traditional 3-inch and 4-inch corrugated pipe and 4-Inch PVC..
  • Installs faster than traditional corrugated pipes and requires 80% less space for transport and storage..
  • FLEX-Drain's unique flexibility allows it to fit in tight spaces and curvy places..
  • 30-Percent higher load-bearing rating than standard corrugated pipes, Minimum working temperature of -50°F and a maximum working temperature of 150°F.
  • Integrated soil-tight fittings lock securely and are perfect for French drains, downspout drain pipe and more!.
Check Stock

Flex-Drain ADP53102 Downspout Adaptor, Landscaping Drain Pipe Adapter 3 by 4 by 4-Inch 2 Pack

  • Compatible with most traditional 3-inch and 4-inch corrugated pipe and 4-Inch PVC..
  • Installs faster than traditional corrugated pipes and requires 80% less space for transport and storage..
  • FLEX-Drain's unique flexibility allows it to fit in tight spaces and curvy places..
  • 30-Percent higher load-bearing rating than standard corrugated pipes, Minimum working temperature of -50°F and a maximum working temperature of 150°F.
  • Integrated soil-tight fittings lock securely and are perfect for French drains, downspout drain pipe and more!.
Check Stock

6 Pieces Balaclava Face Cover Sun Protection Cover Breathable Long Neck Cover for Outdoor Activities (Black, White, Coffee, Dark Blue, Navy Blue, Grey)

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, walkways, and patios.
  • Fits 4 in. Sewer and Drain Pipe & Fittings, 4 in. Single-Wall Corrugated Pipe, 4 in. Triple-Wall Pipe. 12 GPM flow rate. 3.9 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installed—recommended for pedestrians, bicycles, and wheelchair traffic.
  • Place on top of drain pipe or drain fitting for a soil-tight fit. 4 in. Round Drain Grates are available in a variety of colors.
  • NOTE : This fixture NDS part#11 is a 4” round grate to fit 4” S & D fitting as well as Pipe in S & D as well as corrugated pipe.
Check Stock

TUF-Tite 24' Heavy Duty Flat Riser Lid for TUF-Tite Risers or Corrugated Pipe Risers

  • 24" Diameter heavy duty lid has outside diameter of 25" With inside diameter of 24"..
  • Ideal for septic tanks risers and corrugated pipe risers only..
  • Will only work with Tuf-Tite systems (will not fit on competitor brand risers)..
  • Will not fit directly onto a septic tank is designed to fit on risers and corrugated pipe risers only..
Check Stock