Reviews Corrugated Pex Pipe

3/4 Inch Tee Fitting Compression Tee Fittings for 3/4 Inch Tubing System (2 pcs)

  • ... fittings meet the standard of potable water grade. When the water flows through the poly pex fittings, it will not be polluted..
  • 【Fully Equipped】Qty: 1/2 inch pex expansion elbows 10pcs + 1/2 inch pex expansion Tees 10pcs + 1/2 inch pex expansion couplings 10pcs + 1/2 inch pex expansion rings 70pcs | Connection pipe type: Pex A pipe only | Max temperature: 200F | Max operating pressure: 160psi.
  • 【Professional Standards】Pex Expansion A Fittings are of high quality. All poly pex a fittings are manufactured according to ASTM F-1960, CSA B137.5 and qualified cUPC certification. Listed to NSF NSF/ANSI 61..
  • 【Easy to Install】Use expansion tools and expansion rings to connect the expansion fittings to the PEX A pipe. The protruding stop part on the expansion pex fitting makes it clear whether it has been installed in place. NOTE: Expansion tool is not included in the package..
  • 【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemical environment..
Check Stock

LOKMAN 50 Pack 1/2 Inch PEX Cinch Clamps, Stainless Steel Cinch Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections (1/2 Inch)

  • HIGH QUALITY- 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion, construction..
  • 360 °SEAL PROTECTION - These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. Great secure in any PEX pipe using system..
  • WIDELY USED- Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • WIDELY APPLICATIONS - Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc. Providing a strong and reliable crimp fitting application..
  • SIZE - 1/2 inch (17.5mm) PEX cinch clamp rings, fit for 1/2 inch PEX pipe..
Check Stock

FLKQC Wood Gluing Pipe Clamp Set, Heavy Duty Cast Iron Quick Release Pipe Clamps for Woodworking (1, 1/2\)

  • This Pex crimping tool meets the ASTM 2098 standard. Pex Crimping Set works with stainless steel clamps from any manufacturer to make PEX connections from 3/8" to 1"..
  • Our Pex crimp tool/Plumbing tools/Pex cutter/Hose clamp tool has perfect polishing provides no damage during crimping and avoids leaking..
  • It’s easy to switch cinch. And the ratchet design and self-release mechanism will make the cinch easy. The pex fittings pipe tool is factory-adjusted with no requirement for calibration tool..
  • This is a 5 in 1 pex pipe tool that can be used to crimp 3/8, 1/2, 5/8, 3/4 & 1" inch Stainless clamps. No Adjustment on the pex tool is needed to switch sizes..
  • Package Includes: 1pc - Red handle Cinch Crimp tool, 1pc - Red handle pipe cutter, 20pcs 1/2" and 10 pcs 3/4" Clamps set, 1pc Storage Bag..
Check Stock

TICONN 70PCS PEX Clinch Clamps Kit, 304 Stainless Steel PEX Clamp Rings for PEX Pipe Tubing Connection (70CPS Kit)

  • [PREMIUM QUALITY] – The PEX fittings Clamp are made of thick premium 304 stainless steel with smooth edge. The ring clamp will seal the pipe 360° tightly. The stainless PEX rings provide excellent corrosion and rust resistances when used in harsh conditions..
  • [SIZE RANGE AND QUANTITY] – The PEX kit contains 70 pcs PEX pipe clamps include 12 pcs 3/8'', 20 pcs 1/2'', 12 pcs 5/8'', 20 pcs 3/4'' and 6 pcs 1'' PEX rings..
  • [WIDE APPLICATIONS] – The PEX pipe clamp can be used to secure PEX tubing with PEX crimping tool for home plumbing, garden, hydronic heating and air conditioning system. This clamp set contains vary diameters that meet your needs for different applications..
  • [STAY ORGANIZED] – The PEX tool kit assortment come within a storage box, easy to store and carry. The size range is engraved on each PEX clamps which makes it easy to identify the right size of the tube clamp..
  • [TICONN BRAND QUALITY COMMITMENT] – We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and 12-month warranty. 100% Satisfaction Guarantee for risk-free shopping!.
Check Stock

Libraton Pex Cutter 1-1/4\

  • 【Premium Quality】Libraton PVC pipe cutter is made of durable hardness aluminum alloy steel. The thick blade used is of SK4 material with precision sharped..
  • 【Widely Application】The pex pipe cutter (cutting range: up to 1-1/4-inch or up to 31mm) is designed up to cut pipes of various plastic materials (PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.). The tube cutter (cutting range: 1/8inch to 7/8inch or 3-22mm) can be used to cut pipes made of aluminum and copper. It is an essential cutting tool set for your home handyman, plumbers, electricians, and vehicle mechanics..
  • 【Working with Safety】There is a safe lock in the bottom of pex cutting tool. You can buckle it when you don't use the cutter..
  • 【Reasonable Cutting Tool Composition】The PVC pipe cutting tool set includes three compositions, PVC pipe cutter x1, mini tube cutter x1 and PTFE seal tape x3, which can meet your various need when doing the pipe or tube cutting work..
  • 【Attension】This PEX cutter is suitable for most PEX pipes and thin PVC pipes. IT IS NOT SUITABLE FOR THICK PVC PIPES AND PVC PIPES WITH METAL LAYERS. Also, we offer a 12-month lifetime warranty. We have an after-sale service team here for you to ensure your 100% satisfaction..
Check Stock

SharkBite 1 Inch x 300 Feet White PEX-B, PEX Pipe Flexible Water Tubing for Plumbing, U880W300

  • SHARKBITE WHITE PEX-B PIPE: This SharkBite white PEX-B pipe is available in coils up to 1,000 feet in length, allowing longer runs and fewer connections to save time, money, and potential leak points.
  • FREEZE RESISTANT: This flexible PEX tubing expands and contracts as water freezes and thaws within the pipe.
  • ideal for hot and cold potable water distribution, fire protection, and municipal water service lines.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass PEX water tubing offers faster installation compared to rigid pipe, six-month UV resistance, and the highest-rated chlorine resistance.
  • PREFERRED BY THE PRO: This portable PEX pipe is certified to meet ASTM F2023 oxidative-resistance requirements for continuous hot water recirculation.
  • approved for water service lines and burial applications including being buried under concrete.
  • SPECS: SharkBite water pipe tubing features a minimum working temperature of 33 degrees F at 160 PSI, a maximum working temperature of 200 degrees F at 80 PSI, and a maximum working pressure of 160 PSI at 33 to 70 degrees F.
Check Stock

CVS 50 PCS 3/4 Inch PEX Cinch Clamp Rings, Stainless Steel Pex Fittings Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections (3/4 Inch)

  • HIGH QUALITY - Meet ASTM F2098 requirements. Made of 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion..
  • EASY INSTALLATION - Slide the 3/4 inch PEX cinch clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool. Providing a strong, leak-free and reliable crimp fitting connection..
  • WIDELY USED - Conversancy Brand products’ quality and performance is field-proven. Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • CERTIFIED - Meet the same standards for all commercial and residential plumbing applications - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc..
  • SIZE - 3/4 inch (23.3mm) PEX clamps, fit for 3/4 inch PEX pipe..
Check Stock

TICONN PEX Clinch Clamps Crimping Tool for 304 Stainless Steel PEX Clamp Rings, PEX Pipe Tubing Connection (Tool Kit)

  • ...FESSIONAL PLUMBER TOOL] TICONN PEX plumbing tools have efficient ratcheting and self-releasing mechanism that guarantees a proper rock-solid cinch. The ergonomic, cushioned, non-slippery handles were designed to ensure strong grips in any condition. These handles have enough leverage to comfortably crimp clamps PEX pipe on any PEX Fittings. This tool is designed to accept ASTM 2098 compliant stainless steel clamps..
  • [SIMPLE & RELIABLE] Made with tight tolerance and comes pre-calibrated, offering a simple and ready-to-use PEX crimp tool for novice DIYer and professional plumbers. This universal tool does not require any additional adjustment for all Stainless Steel clamp sizes..
  • [PRECISE RATCHETING MECHANISM] PEX clamps are securely clamped by squeezing the handle through a complete ratcheting cycle until the handle releases automatically. The ratcheting function allows the PEX tool to achieve desired compression without hesitation..
  • [ALL-IN-ONE KIT] This package includes all the tools you need in one kit, 1 PEX clinch clamps crimper, 1 PEX pipe cutter, 1 portable storage bag and 48 pcs PEX pipe clamps, which contains 6 pcs 3/8'', 16 pcs 1/2'', 6 pcs 5/8'', 14 pcs 3/4'' and 6 pcs 1'' PEX rings..
  • [TICONN BRAND QUALITY COMMITMENT] We stand behind the qualit....
Check Stock

LOKMAN 50 Pack 5/8 Inch PEX Cinch Clamps Stainless Steel Cinch Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections 5/8 Inch

  • HIGH QUALITY- 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion, construction..
  • 360 °SEAL PROTECTION - These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree....
  • WIDELY USED- Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • WIDELY APPLICATIONS - Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications....
  • SIZE - 5/8 inch (20.8 mm) PEX cinch clamps, fit for 5/8 inch PEX pipe..
Check Stock

Pex Ring Removal Tool with Pex Pipe Cutter - Removes 1/2' -1' Pex Rings (Forging Process) with Pex Pipe Cutter

  • Pex Ring Removal Tool Cuts Pex Copper Crimp Rings in sizes 3/8″ to 1″.
  • Allows Removal of Improperly Crimped Pex Crimp Rings or Disconnect the pipe and fitting.
  • Come with Free Metal Structure Pex Pipe Cutter.
Check Stock

SharkBite U701 PEX Tubing Cutter, For 1/4 Inch, 3/8 Inch, 1/2 Inch, 3/4 Inch, and 1 Inch Pipes

  • CUTS IN SECONDS: Place your PEX or PE-RT pipe in the pex into this pipe cutter and squeeze.
  • VERSATILITY: For clean, straight cuts, use with 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch and 1 inch SharkBite PEX tubing or PE-RT Pipe.
  • QUALITY: SharkBite's quality and performance is field-proven and is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • PERFORMANCE: Use this PEX tool to create a clean cut for your SharkBite fittings.
  • PREFERRED BY THE PRO: All SharkBite products meet the same standards for commercial and residential plumbing applications.
Check Stock

60 Pack 3/4 Inch Pex Expansion Rings Sleeves F1960 Pex A Fittings Pex Expansion Tool with Stop for Pex a Piping System

  • Compatibility: these pex crimp rings are made of PEX A material, designed for Pex A pipe and fitting connections only.
  • Safe Use: through ANSI/NSF-61 and ASSE 1061 product standard certification, the pex expansion tool is safe and reliable, to ensure that you can use it with confidence.
  • Set of 60: you will get 60 3/4 pex crimp rings, enough to make your purchase one off for ongoing demand.
  • Ease of Use: there is an end stop, the pex expander tool to help locate for proper installation, simple and practical.
  • Reliable and Tight: the pex sleeve has a strong memory function, which can always maintain a close fit with the pipe connection, and can provide a strong connection function without auxiliary tools such as glue and solder.
Check Stock

EFIELD 3/8\ - 1\ Pex Pipe and Plastic Pipe Cutter

  • EFIELD Pipe and Plastic cutter has a unique shaped blade which gives piping a Clean Cut, No Burrs.
  • EFIELD Pipe and Plastic cutter Cuts any Size up to 1-Inch (This includes sizes from 1/8"-1").
  • EFIELD Pipe and Plastic cutter has Easy locking handle to safely store Pex Pipe Cutter.
  • EFIELD Pipe and Plastic cutter SHOULD NOT be used to cut: Metal Pipes, Cable Wires, and PVC Tubing.
  • EFIELD Pipe and Plastic Cutter Works with Pex-Tubing and Nylon-Tubing..
Check Stock