Reviews Copper Tube Pipe

Pipe Cutter [1/8\ - 1 1/8\] Tube Cutter Tool for Copper Pipe, Stainless Steel Tubing, Metal, Plastic, Brass - Copper Pipe Cutter - Compact & Tight Space Rigid Tubing Cutter Set for Plumbing

  • HANDYMAN’S BEST FRIEND – Our tubing cutter is especially designed to assist plumbers, electricians & mechanics – whether it’s used as a screw cutter, copper cutter, steel cutter, brake line cutter or an exhaust cutter..
  • PLACE, ADJUST AND ROTATE – Cutting copper tubing has never been easier. Simply, put the tube in the slot where the blade is, adjust to the appropriate setting and rotate your tube. It’s never been this effortless to cut copper tube..
  • NOT JUST FOR COPPER – Our pipe cutting tool isn’t just a great copper tube cutter but also can also cut steel pipe, stainless steel tubing, aluminium piping, PVC and iron. However, we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • GREAT FOR SMALL SPACES – Looking for a fantastic copper pipe cutter for tight spaces? Look no further! Our small pipe cutter fits perfectly in restricted spaces. Our metal tube cutter is also great as an accurate arrow cutter..
  • EXTRA BLADE – Our mini pipe cutter also comes with an extra blade so you can cut as much steel tube as possible. We truly believe our Pipe Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confid....
Check Stock

XIFOWE Copper Tube 1/4 OD x 3/16 ID 5 Ft Tube Wall 1/32 Refrigeration Seamless Round Pipe Tubing Soft Coil Copper Tubing Used In Refrigerators Freezers Air conditioners DIY projects Etc

  • 【Size】✔ 1/4" OD - 3/16" ID (6.35-4.75mm) | Tube Wall: 1/32" (0.8 mm) | Length: 5 Feet (1.524M). Note that the actual length of the copper tube is slightly longer than 5FT because it is measured manually. In addition, when we cut the copper pipe, we used a ring cutter, which will deform the section surface, resulting in a smaller inner diameter from the section surface. Please rest assured that this will only affect the size of the section surface, but not the actual size of the copper pipe..
  • 【Material】✔Soft copper pipe copper pipe is made of high quality copper material, the surface is smooth without seam. Note, because it is made of pure copper, so the surface is inevitably easy to oxidation and discoloration, can be polished with high mesh sandpaper, will become bright and clean!.
  • 【Good Thermal Conductivity】: Good heat dissipation and refrigeration capability, high strength at low temperature. This is a good choice for refrigerators, freezers, air conditioners and other refrigeration equipment.
  • 【Shape Changeable】Soft, Because copper pipe can bend and deform, they can often be made into elbows and joints. Smooth bending allows copper tubes to bend at any angle. Or used in manufacture of magnetism instruments or meters..
Check Stock

Loreso Mini Copper Pipe Tubing Cutter - Mini Tube Cutter for Copper Brass Aluminum, Thin Stainless Steel for 1/8 to 1 1/8 (3-28mm) OD Pipes)

  • MINI TUBING AND PIPE CUTTER – Manufactured with high-quality, heavy duty alloy steel, this tube cutter will efficiently cut copper, brass, aluminum and thin steel pipes. This pipe cutter provides a fast, economical way to do a clean cut..
  • VERSATILE PIPE CUTTER FOR ALL INDUSTRIES – This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops.
  • EASY TO OPERATE – Cut like a BOSS with Loreso manual pipe cutter, Rotate the knob to grip tube, Revolve tube cutter around the pipe, Tighten grip smoothly after each full circle until full cut..
  • VARIOUS TUBE CUTS – Cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8 to 1 1/8 Inch ( 3-28mm ) Outer Diameter OD..
  • STURDY ALUMINUM CAST FRAME – Tube Cutter body is made of light weight and durable Aluminum Casting, Blade is built using CNC machining with most durable and high quality Alloy Steel..
Check Stock

Libraton Tube Cutter, Mini Tubing Cutter, Heavy-duty Pipe Cutter with Deburring Tool for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

  • [High-quality Blade] Libraton pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube..
  • [Mini Cutter] The mini tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
  • [Copper Tube Cutter] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
Check Stock

[5 in 1]Swaging Tool Copper Tube Expander Manual Copper Pipe Swage Too Expander Drill Bit Soft Copper tubing Tool bit with for HVAC Repairing Air Conditioner

  • Material:This Manual tube expander is bearing steel material, blackened surface treatment process to prevent pipe drill bit rusting..
  • Contains: 6pcs hexagonal handle tube expander + 5pcs bell mouth expander,Air Conditioner Copper Tube Expander Tool Drill Sets.
  • Specifications: 7/8 (22.2mm), 3/4 (19mm), 5/8 (15.9mm), 1/2 (12.7mm), 3/8 (9.5mm), 1/4 (6.3mm).
  • Function: When the air conditioner is installed, expand the copper pipe to make the two copper pipes interconnected. (It needs to be installed on a hand electric drill).
  • Operation method: according to the expanding pipe diameter, select the corresponding expanding head and install it. In order to prevent the edge of the pipe from cracking, the tip of the expanding head should be used to expand the pipe. Then insert the whole expanding head into the copper tube and apply force evenly until the cup mouth is formed..
Check Stock

Bravex Tube Cutter 1/4\ to 2\

  • [High-quality Blade] This pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2" (50mm)(OUTER DIAMETER)..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel blades. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes)..
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [100% Money-Back Guarantee] If you're not satisfied, return back to us, no-hassle refund or product replacement..
Check Stock

Quickun Copper Tube 1/12\ ID × 1/8\ OD (2-3mm)Seamless Round Pipe Tubing (6.56FT)

  • 【Size】: 1/12" ID - 1/8"OD (2-3mm) | Tube Wall: 1/48" | Length: 6.56 Feet.
  • 【Duarble Material】: Soft copper pipe copper pipe is made of high quality copper material, corrosion resistance, excellent ductility and electrical conductivity, can adjust the required length of their own processing. The surface is smooth without seam..
  • 【Good Thermal Conductivity】: Used in manufacture of magnetism instruments or meters..
  • 【Wide Range Of Use】: Soft copper tube as refrigeration tube coil tube is widely used in refrigerators, freezers, air conditioners, DIY projects, hobbies, crafts, architectural models, architectural decoration, frame, industry, gardening products, electrical and thermal conductivity, etc..
  • 【Wonderful Plasticity】: Easy to work under hot and cold pressure. The floppy copper tube can be bent and deformed as needed to meet different needs..
Check Stock

WADEO HVAC Repairing Tools, Air Conditioner Copper Tube Swaging Tool with Expander Drill Bit, Copper Pipe Cutter and Deburring Tool for Copper, Aluminum and Thin Stainless Steel Tube

  • Drill Bits: Made of durable and wear-resistant bearing steel, it is not easy to break, When the air conditioner is installed, These drill bits can expand the copper pipe, so you can link the two copper pipes to each other..
  • Mini Copper Pipe Tubing Cutter(1/8" - 1 1/8"): It can cut copper tube, steel pipe, stainless steel tubing, aluminium piping PVC and iron. But we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • Deburring Tool: With ergonomic handle for secure grip, the blade is mounted on the handle can be rotated 360 degrees, this tool helps to clean the top of the pipe or tube and it has a compact size which is easy to be carried to anywhere.(The blade is hidden in the pen holder).
  • Drill Bits Size: 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
  • Package Include: 3-28mm（1/8"-1-1/8"）Tube or Pipe Cutter*1.
Check Stock

SSPIN300 Swaging Tool Drill Bit Set with 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” Bits

  • ✅MADE OF HIGH QUALITY MATERIAL: This expander tool is made of heavy duty stainless steel, solid and sturdy, durable and will last for long time,.
  • ✅SPECIFICATION: Copper Pipe Tube Expander it can be use to expand copper pipe with diameter 6mm, 8mm, 10mm, 12mm, 16mm, 19mm, 22mm (1/4″ 5/16″ 3/8″ 1/2″ 5/8″ 3/4″ 7/8″) ..
  • ✅ERGONOMICS DESIGN: Hand Refrigeration Tools with Hinge design, which can avoid swing of handle, ensuring stable operation. The rubber will make your feel soft and comfortable to use..
  • ✅STRONG AND DURABLE SPRING: The spring is strong and durable, you don’t need to press the handle very hard when expanding the tube, makes your job easier and productive..
  • ✅APPLICATIONS: This hand copper pipe expanding tool can be widely used for expanding your pipe to fit your certain desired size when you repair HVAC, refrigerator or other copper pipe projects.
Check Stock

QLOUNI 80Pcs 7-21mm 304 Stainless Steel Single Ear Stepless Hose Clamps with Clamp Crimper Tool Kit,For Water Pipe, Plumbing, Automotive and Mechanical Application

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping performance, offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds..
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This hydraulic copper tube fittings crimper meets your various demand fast for pipe maintenance and repair..
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an integral hydraulic pipe crimping tool with a standard manual hydraulic pump..
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic pipe tube crimping tool will release pressure automatically when reaching the max pressure..
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied in electric power, traffic, petroleum, chemical engineering, mining, metallurgy, and shipbuilding areas..
Check Stock

AMZCNC Compact Bender Kit with Reverse Bending Attachment for 1/4 - 7/8 Tube and Pipe Bending Premium Ratcheting Tube Bender

  • 【High quality material】: The main body of the tube bender of The copper tube bending tool kit is made of stainless steel, which is pressure....
  • 【Wide range of application】: This pipe bender tool kit is suitable for pipe benders of 1/4"-7/8", applicable pipe materials: copper pipe, aluminum....
  • 【Easy to install】: The pipe bender is easy to install, easy to assemble and operate, and easy to get started. Support pipe diameter: 1/4.
  • 【Ergonomic design】: CT-999 pipe bender conforms to ergonomic design. The kit is made of 304 stainless steel, steel fiber, iron and other....
  • 【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe....
Check Stock

Libraton Copper Tube Cutter 1/4" to 2-3/4", Tube Cutter, Heavy-duty Tubing Cutter for Copper Pipe with Deburring Tool

  • [High-quality Blade] Libraton pipe cutter blade is made from aluminum alloy, wear-resistant. It will never get rust..
  • [Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation smoother and clean..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2-3/4" (70mm)(OUTER DIAMETER)..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, and THIN stainless steel tubes).
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
Check Stock

2 Pcs Mini Steel Tube Cutter Tool, Mini Tubing Cutter Pipe Cutter Tube Cutter Tool of Diameter from 1/8 to 1-1/8 Inch (3-28 Mm), Tube Pipe Cutter for Copper Brass Aluminum, Thin Stainless Steel Tube

  • Mini Tubing and Pipe Cutter: our tubing cutter is especially designed to assist plumbers, electricians and mechanics.
  • It is made of heavy duty alloy steel, this tube cutter mainly use for cutting copper, brass, aluminum and thin steel pipes.
  • Tube pipe cutter makes clean and precise cuts.
  • Various Tube Cuts: this tubing cutters will efficiently cut copper, brass, aluminum, thin steel and PVC pipes with 1/8 to 1-1/8 inch (3-28 mm) outer diameter.
  • This mini tube cutter provides a fast way to do a clean cut.
  • Convenient and Powerful: our small pipe cutter fits nicely in restricted spaces.
  • The mini steel tube cutter tool features a strong yet lightweight slide and wheel housing and large knurled screw knob for easy control of cutting pressure.
  • Large knurled feed screw knob provides users with ultimate cutting pressure control to produce clean cuts.
  • Multifunctional Pipe Cutter: this tube cutter tool fits for use on construction sites, plumbing jobs, HVAC and refrigeration, heating, manufacturing, decorating or even at garage repair shops and so on.
  • Specifically designed for use in restricted spaces to make tight cutting jobs significantly easier and more manageable.
  • Easy to Operate: cutting thin stainless steel tubing has never been easier.
Check Stock