Reviews Copper Fitting Pipe

GIANNEER Disconnect Tongs Tool Push to Connect Fittings Removal Tools Disconnect Clamp Plumbing Tool for 1/2”, 3/4”, 1” Brass Pipe Fittings

  • 1.Versatile Tool: This GIANNEER disconnecting tongs includes 3 sizes of interchangeable teeth(1/2”, 3/4”, 1”). It can remove the push-to-connect pipe fittings, such as copper and pipe in any combination easily and quickly. No extra glue, tape, soldering, pliers required. The disconnect tongs can be reused..
  • 2.Unique Design: The new design of disconnect line tool can reach the pipe perfectly. It brings much convenience to your work..
  • 3.Interchangeable Teeth: Press the button at the top of the removal tool, then insert the replacement piece to complete the switch..
  • 4.How to Use: To use the disconnect tool, simply slide the tongs over the fitting and the pipe, align the clamp with fitting and pipe. Then squeeze the tongs to press the fitting's release collar to remove the pipe from the fitting effortless..
  • 5.Superior Material: This disconnect tongs tool is made of S50C steel, and the surface is oxidized and blackened, which is not easy to rust. In addition, the tongs has been heat treated as a whole, with high hardness. It’s suitable for various operating environment....
Check Stock

Compatible with Compression Sleeve Puller（03943）-- Sleeve Remover for 1/2-Inch Compression Fittings Only -- Corroded & Frozen Supply Stops --Plumbing Tools Compression Ring Removal Tool

  • ...ater compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe..
  • Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes..
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant..
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule....
Check Stock

Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings

  • 【Package Includes】1 pcs disconnect tongs tool.
  • 1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
  • 【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
  • 【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
  • 【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..
Check Stock

XINGYHENG Hex Brass Female Pipe Fitting Thread Straight Pressure Reducing Valve Connector CGA-320 to CGA-580 - CO2 Reducing Pipe Nut Fittings NPT1/4 Tank to Argon Pressure Regulator

  • 1.Durable material: The pipe fittings are made of brass and are resistant to corrosion, high temperature ductility and low magnetic conductivity., it is solid, durable, stable and reliable, with high hardness.
  • 2.Strict standards: Standardized processing, complete character specifications. The specifications includes brass pipe fitting with 24MM/0.94" Length 1/4 Female G threads..
  • 3.Perfect detail processing: Keep improving, brass plating on the surface, smooth and durable, the mother-child interface is smooth, not easy to fall off, and the detail processing is perfect and beautiful. Hex nut head, regular shape, thick material, perfect arc design, rounded edges, no burrs..
  • 4.Excellent performance: Brass pipe fitting is designed with female thread and hexagonal shape. For connecting Male threaded threaded threaded pipe, Matching threaded screw. good plastic toughness, small connection deformation, reliable force transmission, good fatigue performance, easy to check..
  • 5.Wide application: Copper pipe can be connected to copper, brass, plastic, aluminum and welded steel as fast joints, easy and fast connection. Widely used in Use in plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening..
Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • ...e puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fa....
Check Stock

SharkBite UC256LFA10 3/4

  • ELBOWS: SharkBite fitting 3/4 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems..
  • AFFORDABLE: Low cost solution to connect PEX Pipe Tubing.
  • COMPATABLE PRODUCT: Use with SharkBite PEX Clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. The SharkBite connection system is perfect for your next commercial or homeowner plumbing project..
  • LEAD FREE: All SharkBite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.
  • QUALITY: Only SharkBites quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
Check Stock

VEVOR Hydraulic Pipe Crimping Tool, 8T Hydraulic Copper Tube Fittings Crimper, Copper Pipe Crimper 40CR Steel, Copper Crimping Pliers with Jaws 1/2'(12.7mm), 3/4'(19.05mm), 1'(25.4mm)

  • Excellent Crimping Ø12-25 MM: It features excellent workmanship and crimping performance, more labor-saving. Great for pipe fitting, it crimps the pipes in seconds, for 1/2", 3/4", and 1" pipes..
  • Premium Material: The pipe crimping tool is constructed of 40CR steel with punching and forging process and powder-coated treatment to ensure integrated mechanical property..
  • Ergonomic Handle: Safe handling with slip-proof rubberized handle grips, anti-static. The handle can be elongated to use the lowest energy..
  • Easy to Operate: The distance between two mechanical levers is adjustable. The interchangeable jaws can be changed effortlessly..
  • Wide Application: A labor-saving tool for copper pipe connection, not for PEX pipes and other pipes. Suitable for copper fittings and copper joints, clamping copper sleeve..
Check Stock

VEVOR Plumbing Copper Pipe Crimper Press with 1/2 3/4 1 Jaws,Copper Tube Fittings Crimping Tool 40CR Steel Material,Pipe Press Copper Crimp Tool Suitable for Copper Fittings and Copper Joints etc

  • Excellent Crimping Ø12-25 MM: It features excellent workmanship and crimping performance, more labor-saving. Great for pipe fitting, it crimps the....
  • Premium Material: The pipe crimping tool is constructed of 40CR steel with punching and forging process and powder-coated treatment to ensure....
  • Ergonomic Handle: Safe handling with slip-proof rubberized handle grips, anti-static. The handle can be elongated to use the lowest energy..
  • Easy to Operate: The distance between two mechanical levers is adjustable. The interchangeable jaws can be changed effortlessly..
  • Wide Application: A labor-saving tool for copper pipe connection, not for PEX pipes and other pipes. Suitable for copper fittings and copper joints,....
Check Stock

Eastman 1 Inch IPS Pipe Repair Clamp, 3 Inch Length, Stainless Steel, 45185

  • PIPE REPAIR CLAMP: Pipe repair clamp tool is designed for use on steel, copper, and plastic pipes, and is perfect for providing repairs to the pipes which suffered puncture, pinhole, or split.
  • creates a positive seal that won't collapse on Schedule 40 PVC.
  • DURABLE: Pipe clamps are crafted from strong and sturdy 301 stainless steel for long-lasting reliability.
  • WHAT IS INCLUDED: Metal pipe clamp is equipped with a high quality rubber gasket that will not deteriorate, and includes galvanized iron lugs which protect against rust and corrosion.
  • SPECS: Pipe fitting clamp features a 1 Inch IPS connection, and can withstand temperatures of 20 degrees F to 180 degrees F.
  • PREFERRED BY THE PRO: Our tools and plumbing supplies are perfect for both home owners and professional contractors.
Check Stock

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

  • Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
  • Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
  • Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
  • Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.
Check Stock

(Pack of 10) EFIELD Pex A Full Flow Expansion Brass Fitting 3/4'x 3/4' Elbow ONLY For Pex-A Tubing Connection, ASTM F1960, Lead Free

  • This Efield Product is Compatible with all Types of Brands of Pex A Pipe/Tubing, Uponor(Wirsbo), Sious Chief, Etc..
  • Certified to ANSI/NSF-61 and ASSE 1061 Product Standard.
  • This Efield Product is Compatible with Expanding Fitting System, NOT Compatible with Stainless Steel Clamp & Copper Crimp Ring Systems.
  • Only for Pex A Pipe/Tubing Fitting Connection.
Check Stock

Hydraulic Cylinder Jack Hydraulic Pex Pipe Aluminum Plastic Pipe Tube Crimping Tool CW-1632 Floor Heating Pipe Plumbing Pressure Clamp Super heavy load

  • Hydraulic crimping tool for connecting fitting with pipe..
  • Well balanced barycenter, little angled wire pressing head meet with human-machinery engineering theory, operation more easy..
  • All stressing parts made of special steel treatment with quenching..
  • For plastic pipes, PEX pipes, lead pipes and other accessories , copper header, stainless steel compression sleeve, aluminum, copper jacket cover..
  • Can be transposed mold, the same tools can be crimped into 16-32mm from the different specifications of pipe fittings..
Check Stock

IBOSAD Copper Tube Fittings Hydraulic Pipe Crimping Tools with 1/2 inch,3/4 inch and 1 inch Jaw Copper Pipe Propress Crimpers Pressing Pliers,Suit for Narrow Space and Tee Fitting

  • The body made of aluinum alloy,Effectively prevent oil leakage.
  • The head can be 350 degrees Rotatable,be Portable Use.
  • Compatible with Viega Copper,Pro-Press,Elkhart,Conex Pipe Fittings.
Check Stock